HP DL380R05
Andrei V. Lavreniyuk
andy.lavr at reactor-xg.kiev.ua
Fri Mar 26 09:31:50 UTC 2010
26.03.2010 10:27, Holo Hup! пишет:
> Hi to all. We want buy servers. What can you say about HP DL380R05? Have you
> any problems with that servers?
>
> Server HP/DL380R05/G5/TCP/IP Offload Engine/Intel® Xeon® E5405/2.0 МHz/2 x
> 512 Mb
>
> Server HP/DL380R05/G4/LAN/Intel® Xeon® X5260/3.33 МHz/2х1024 Mb
No problem.
# dmesg
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #0: Thu Mar 25 12:34:25 EET 2010
root at hp.technica-03.local:/usr/obj/usr/src/sys/HP amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz (2000.08-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xce33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 6442450944 (6144 MB)
avail memory = 6128840704 (5844 MB)
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
Security policy loaded: TrustedBSD MAC/portacl (mac_portacl)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16
(20100121/tbfadt-707)
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8
(20100121/tbfadt-707)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
ichwd module loaded
netsmb_dev: loaded
smbios0: <System Management BIOS> at iomem 0xf4f40-0xf4f5e on
motherboard
smbios0: Version: 2.4, BCD Revision: 2.4
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
ACPI Warning for \\_SB_.PCI0.PT02._PRT: Return Package has no elements
(empty) (20100121/nspredef-572)
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci5
pci9: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 0.3 on pci4
pci12: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 3.0 on pci0
pci23: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci15: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci18: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci18
pci19: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci19
pci20: <ACPI PCI bus> on pcib10
ciss0: <HP Smart Array E200i> port 0x4000-0x40ff mem
0xfdf80000-0xfdffffff,0xfdf70000-0xfdf77fff irq 19 at device 8.0 on
pci19
ciss0: PERFORMANT Transport
ciss0: got 2 MSI messages]
ciss0: [ITHREAD]
pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib11
pcib12: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib12
bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem
0xfa000000-0xfbffffff irq 16 at device 0.0 on pci3
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce0: Ethernet address: 00:1e:0b:e8:12:c8
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C
(1.9.6); Flags (MSI|MFW); MFW ()
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
0x1000-0x101f irq 16 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
0x1020-0x103f irq 17 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port
0x1040-0x105f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port
0x1060-0x107f irq 19 at device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf9df0000-0xf9df03ff irq
16 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
0xf0000000-0xf7ffffff,0xf9ff0000-0xf9ffffff irq 23 at device 3.0 on pci1
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 22 at
device 4.4 on pci1
uhci4: [ITHREAD]
usbus5: <UHCI (generic) USB controller> on uhci4
ipmi0: <IPMI System Interface> mem 0xf9ef0000-0xf9ef00ff irq 21 at
device 4.6 on pci1
ipmi0: using KSC interface
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.2 on
pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f3 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
ichwd0: <Intel 63XXESB watchdog timer> on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
ipmi1: <IPMI System Interface> on isa0
device_attach: ipmi1 attach returned 16
ichwd0: <Intel 63XXESB watchdog timer> at port 0x930-0x937,0x960-0x97f
on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
ipmi1: <IPMI System Interface> on isa0
device_attach: ipmi1 attach returned 16
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xe6000-0xe7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ppc0: cannot reserve I/O port range
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
pbio0: <Intel 8255 PPI (basic mode)> at port 0x360-0x363 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ZFS filesystem version 3
ZFS storage pool version 14
Timecounters tick every 1.000 msec
ncp_load: loaded
ipfw2 initialized, divert enabled, nat enabled, rule-based forwarding
enabled, default to deny, logging disabled
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
ipmi0: IPMI device rev. 1, firmware rev. 1.2, version 2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen5.1: <(0x103c)> at usbus5
uhub5: <(0x103c) UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ipmi0: Number of channels 8
ipmi0: Attached watchdog
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
ugen5.2: <HP> at usbus5
ukbd0: <Virtual Keyboard> on usbus5
kbd2 at ukbd0
ums0: <Virtual Mouse> on usbus5
ums0: 3 buttons and [XY] coordinates ID=0
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 69970MB (143299800 512 byte sectors: 255H 63S/T 8920C)
da1 at ciss0 bus 0 scbus0 target 1 lun 0
da1: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 69970MB (143299800 512 byte sectors: 255H 63S/T 8920C)
ada0 at ata0 bus 0 scbus2 target 0 lun 0da2 at ciss0 bus 0 scbus0 target
2 lun 0
da2: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device
da2: 135.168MB/s transfers
da2: Command Queueing enabled
da2: 69970MB (143299800 512 byte sectors: 255H 63S/T 8920C)
da3 at ciss0 bus 0 scbus0 target 3 lun 0
da3: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device
da3: 135.168MB/s transfers
da3: Command Queueing enabled
da3: 69970MB (143299800 512 byte sectors: 255H 63S/T 8920C)
ada0: <ST380811AS 3.AAE> ATA-7 SATA 2.x device
ada0: 150.000MB/s transfers (SATA, UDMA6, PIO 8192bytes)
ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
-------------------------------------------------------------------------------
--
Best regards, Andrei V. Lavreniyuk.
More information about the freebsd-proliant
mailing list