Compaq DL 360 SMP problem (was: i386/89545: Compaq DL 360 ACPI
boot problem)
Anders Nordby
anders at fupp.net
Wed Oct 4 03:46:16 PDT 2006
Hi,
Posting this on -proliant also, as this is a problem with a Proliant
system.
On Wed, Oct 04, 2006 at 12:44:15PM +0200, Anders Nordby wrote:
> And old mail here, but I still have this problem getting SMP to work on
> the machine.
>
> On Fri, Jan 06, 2006 at 07:53:17AM -0500, John Baldwin wrote:
> >> How can I get SMP running? This worked in 5.x and 4.x, I believe.
> > 2) Re: SMP, just to make sure, do you have 'device apic' and 'options SMP' in
> > your kernel? Also, can you provide the output of 'acpidump -t' so I can see
> > what your APIC table (MADT) looks like. Also, does the kernel find SMP if
> > you disable ACPI?
>
> Yes, apic is enabled in the kernel that I run. ACPI is loaded as a
> kernel module. If I disable ACPI, FreeBSD also finds only one processor.
>
> I still use the custom dsdt as modified after getting instructions by
> you in this PR http://www.freebsd.org/cgi/query-pr.cgi?pr=89545. The
> modifications are:
>
> --- vm.asl Sat Jan 7 12:06:14 2006
> +++ vm-fixed.asl Sat Jan 7 12:08:04 2006
> @@ -5,13 +5,13 @@
> /*
> RSDT: Length=52, Revision=1, Checksum=69,
> OEMID=COMPAQ, OEM Table ID=MICRO, OEM Revision=0x2,
> - Creator ID=Ò, Creator Revision=0x162e
> + Creator ID=ASL Creator Revision=0x162e
> Entries={ 0x67ffc040, 0x67ffc100, 0x67fff800, 0x67ffc180 }
> */
> /*
> FACP: Length=116, Revision=1, Checksum=110,
> OEMID=COMPAQ, OEM Table ID=MICRO, OEM Revision=0x2,
> - Creator ID=Ò, Creator Revision=0x162e
> + Creator ID=ASL Creator Revision=0x162e
> FACS=0x67ffc0c0, DSDT=0x67ffc200
> INT_MODEL=APIC
> Preferred_PM_Profile=Unspecified (0)
> @@ -84,7 +84,7 @@
> /*
> SPCR: Length=80, Revision=1, Checksum=14,
> OEMID=COMPAQ, OEM Table ID=SPCR_ROM, OEM Revision=0x1,
> - Creator ID=Ò, Creator Revision=0x162e
> + Creator ID=ASL Creator Revision=0x162e
> */
> /*
> * Intel ACPI Component Architecture
> @@ -1573,7 +1573,7 @@
> Else
> {
> Store ("PCI0._PRT in PIC mode", Debug)
> - Return (Package (0x08)
> + Return (Package (0x07)
> {
> Package (0x04)
> {
> @@ -1588,14 +1588,6 @@
> 0x0001FFFF,
> 0x01,
> ITR2,
> - 0x00
> - },
> -
> - Package (0x04)
> - {
> - 0x0004FFFF,
> - 0x00,
> - FAKE,
> 0x00
> },
>
> I'm running 6.1 on the system now, but still FreeBSD sees only one CPU.
> When booting the system it lists two:
>
> Processor 1 initialized at 800/133 MHz with 256 Kbyte Cache
> Processor 2 initialized at 800/133 MHz with 256 Kbyte Cache
>
> If I try to run with acpi but without the modified dsdt, I get these
> pci/cpu/apic/acpi messages on boot:
>
> CPU: Intel Pentium III (797.48-MHz 686-class CPU)
> acpi0: <COMPAQ MICRO> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci_link0: apparently invalid index 0
> pci0: <ACPI PCI bus> on pcib0
> ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem
> 0xc5000000-0xc5ffffff,0xc4000000-0xc4ffffff irq 5 at device 1.0 on pci0
> pci0: <display, VGA> at device 3.0 (no driver attached)
> pci0: <base peripheral> at device 4.0 (no driver attached)
> pcib1: <PCI-PCI bridge> at device 5.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pci0: <memory> at device 5.1 (no driver attached)
> isab0: <PCI-ISA bridge> at device 15.0 on pci0
> atapci0: <ServerWorks ROSB4 UDMA33 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pcib2: <ACPI Host-PCI bridge> on acpi0
> pci_link4: BIOS IRQ 7 for 3.4.INTA is invalid
> pci_link2: BIOS IRQ 3 for 3.6.INTA is invalid
> pci3: <ACPI PCI bus> on pcib2
> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem
> 0xc6fff000-0xc6ffffff,0xc6e00000-0xc6efffff irq 10 at device 4.0 on pci3
> fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem
> 0xc6dff000-0xc6dfffff,0xc6c00000-0xc6cfffff irq 10 at device 5.0 on pci3
> ida1: <Compaq Smart Array 4200 controller> port 0x4400-0x44ff mem
> 0xc6bff000-0xc6bfffff irq 9 at device 6.0 on pci3
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
> sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>
> With the custom dsdt, I get:
>
> CPU: Intel Pentium III (797.48-MHz 686-class CPU)
> ACPI-0377: *** Info: Table [SSDT] replaced by host OS
> ACPI: overriding DSDT/SSDT with custom table
> ACPI-0377: *** Info: Table [DSDT] replaced by host OS
> acpi0: <COMPAQ MICRO> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem
> 0xc5000000-0xc
> 5ffffff,0xc4000000-0xc4ffffff irq 5 at device 1.0 on pci0
> pci0: <display, VGA> at device 3.0 (no driver attached)
> pci0: <base peripheral> at device 4.0 (no driver attached)
> pcib1: <PCI-PCI bridge> at device 5.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pci0: <memory> at device 5.1 (no driver attached)
> isab0: <PCI-ISA bridge> at device 15.0 on pci0
> atapci0: <ServerWorks ROSB4 UDMA33 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x17
> 7,0x376,0x2800-0x280f at device 15.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pcib2: <ACPI Host-PCI bridge> on acpi0
> pci_link4: BIOS IRQ 7 for 3.4.INTA is invalid
> pci_link2: BIOS IRQ 3 for 3.6.INTA is invalid
> pci3: <ACPI PCI bus> on pcib2
> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem
> 0xc6fff000-0xc6fffff
> f,0xc6e00000-0xc6efffff irq 10 at device 4.0 on pci3
> fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem
> 0xc6dff000-0xc6dffff
> f,0xc6c00000-0xc6cfffff irq 10 at device 5.0 on pci3
> ida1: <Compaq Smart Array 4200 controller> port 0x4400-0x44ff mem
> 0xc6bff000-0xc
> 6bfffff irq 9 at device 6.0 on pci3
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
> sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>
> If I run without ACPI, I get:
>
> CPU: Intel Pentium III (797.48-MHz 686-class CPU)
> cpu0 on motherboard
> pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 0 on
> motherboard
> pci0: <PCI bus> on pcib0
> ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem
> 0xc5000000-0xc
> 5ffffff,0xc4000000-0xc4ffffff irq 5 at device 1.0 on pci0
> pci0: <display, VGA> at device 3.0 (no driver attached)
> pci0: <base peripheral> at device 4.0 (no driver attached)
> pcib1: <PCI-PCI bridge> at device 5.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pci0: <memory> at device 5.1 (no driver attached)
> isab0: <PCI-ISA bridge> at device 15.0 on pci0
> atapci0: <ServerWorks ROSB4 UDMA33 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x17
> 7,0x376,0x2800-0x280f at device 15.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 3 on
> motherboard
> pci3: <PCI bus> on pcib3
> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem
> 0xc6fff000-0xc6fffff
> f,0xc6e00000-0xc6efffff irq 7 at device 4.0 on pci3
> fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem
> 0xc6dff000-0xc6dffff
> f,0xc6c00000-0xc6cfffff irq 10 at device 5.0 on pci3
> ida1: <Compaq Smart Array 4200 controller> port 0x4400-0x44ff mem
> 0xc6bff000-0xc
> 6bfffff irq 3 at device 6.0 on pci3
>
> In any case, I only get one CPU. How to fix?
>
> Acpidump attached.
>
> Bye,
>
> --
> Anders.
--
Anders.
-------------- next part --------------
/*
RSD PTR: OEM=COMPAQ, ACPI_Rev=1.0x (0)
RSDT=0x67ffc000, cksum=250
*/
/*
RSDT: Length=52, Revision=1, Checksum=69,
OEMID=COMPAQ, OEM Table ID=MICRO, OEM Revision=0x2,
Creator ID=Ò, Creator Revision=0x162e
Entries={ 0x67ffc040, 0x67ffc100, 0x67fff800, 0x67ffc180 }
*/
/*
FACP: Length=116, Revision=1, Checksum=110,
OEMID=COMPAQ, OEM Table ID=MICRO, OEM Revision=0x2,
Creator ID=Ò, Creator Revision=0x162e
FACS=0x67ffc0c0, DSDT=0x67ffc200
INT_MODEL=APIC
Preferred_PM_Profile=Unspecified (0)
SCI_INT=9
SMI_CMD=0x230, ACPI_ENABLE=0x1, ACPI_DISABLE=0x0, S4BIOS_REQ=0x0
PSTATE_CNT=0x0
PM1a_EVT_BLK=0x220-0x223
PM1a_CNT_BLK=0x230-0x231
PM_TMR_BLK=0x240-0x243
P_LVL2_LAT=65535 us, P_LVL3_LAT=65535 us
FLUSH_SIZE=0, FLUSH_STRIDE=0
DUTY_OFFSET=0, DUTY_WIDTH=0
DAY_ALRM=0, MON_ALRM=0, CENTURY=0
IAPC_BOOT_ARCH=
Flags={WBINVD,PROC_C1,SLP_BUTTON,FIX_RTC}
*/
/*
FACS: Length=64, HwSig=0x0000abcd, Firm_Wake_Vec=0x00000000
Global_Lock=
Flags=
Version=0
*/
/*
DSDT: Length=8075, Revision=1, Checksum=89,
OEMID=COMPAQ, OEM Table ID=DSDT, OEM Revision=0x1,
Creator ID=MSFT, Creator Revision=0x100000b
*/
/*
APIC: Length=94, Revision=1, Checksum=76,
OEMID=COMPAQ, OEM Table ID=00000083, OEM Revision=0x2,
Creator ID=, Creator Revision=0x0
Local APIC ADDR=0xfee00000
Flags={PC-AT}
Type=Local APIC
ACPI CPU=0
Flags={ENABLED}
APIC ID=0
Type=Local APIC
ACPI CPU=1
Flags={DISABLED}
APIC ID=1
Type=Local APIC
ACPI CPU=2
Flags={DISABLED}
APIC ID=2
Type=Local APIC
ACPI CPU=3
Flags={ENABLED}
APIC ID=3
Type=IO APIC
APIC ID=8
INT BASE=0
ADDR=0x00000000fec00000
Type=Local NMI
ACPI CPU=ALL
LINT Pin=1
Flags={Polarity=conforming, Trigger=conforming}
*/
/*
SSDT: Length=546, Revision=1, Checksum=240,
OEMID=COMPAQ, OEM Table ID=SSDT, OEM Revision=0x1,
Creator ID=MSFT, Creator Revision=0x100000b
*/
/*
SPCR: Length=80, Revision=1, Checksum=14,
OEMID=COMPAQ, OEM Table ID=SPCR_ROM, OEM Revision=0x1,
Creator ID=Ò, Creator Revision=0x162e
*/
More information about the freebsd-proliant
mailing list