[Bug 225629] powerpc64 (POWER9) segfaults randomly (e.g., building lang/gcc5)
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Tue Mar 6 13:08:28 UTC 2018
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=225629
Rino <rrondan at itrestauracion.com.ar> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |rrondan at itrestauracion.com.
| |ar
--- Comment #14 from Rino <rrondan at itrestauracion.com.ar> ---
Hi,
I have a powerpc g5 Mac, when I tried to compile xorg-minmal using postmaster I
have the dependency of gcc5 every time , I know it is deprecated but also I
tried to install from /usr/ports/lang/gcc6 or postmaster and every time try to
compile gcc5 also I tried only gcc5 but fails..
How I can install gcc6 avoiding gcc5 ?
root@:/usr/ports/lang/gcc6 # dmesg
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 07:28:47 UTC 2017
root at releng2.nyi.freebsd.org:/usr/obj/powerpc.powerpc64/usr/src/sys/GENERIC64
powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
VT(ofwfb): resolution 1280x1024
cpu0: IBM PowerPC 970MP revision 1.1, 2000.53 MHz
cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU>
cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN>
real memory = 2651049984 (2528 MB)
avail memory = 2477019136 (2362 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0: dev=ff89d680 (BSP)
cpu1: dev=ff89eb70
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree> on nexus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
pcr0: <PPC 970 Power Control Register> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
pcr1: <PPC 970 Power Control Register> on cpu1
powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0
powermac_nvram0: bank0 generation 1839, bank1 generation 1838
unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0
unin0: Version 66
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0
iicbus0: <OFW I2C bus> on iichb0
ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus0
ds16310: <Temp-Monitor DS1631> at addr 0x96 on iicbus0
max66900: <Temp-Monitor MAX6690> at addr 0x98 on iicbus0
max66901: <Temp-Monitor MAX6690> at addr 0x9c on iicbus0
htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff on unin0
pcib0: <IBM CPC945 PCI Express Root> mem 0xf0000000-0xf1ffffff on ofwbus0
pci0: <OFW PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem
0x92000000-0x92ffffff,0x98000000-0x9fffffff,0x91000000-0x91ffffff irq 3 at
device 0.0 on pci0
vgapci0: Boot video device
pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem
0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0
pcib1: 86 HT IRQs on device 7.0
pci1: <OFW PCI bus> on pcib1
pcib1: Enabling MSI window for HyperTransport slave at pci1:0:1:0
pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1
pci2: <OFW PCI bus> on pcib2
pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1
pci3: <OFW PCI bus> on pcib3
bge0: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem
0xfa530000-0xfa53ffff,0xfa520000-0xfa52ffff irq 66 at device 4.0 on pci3
bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz
miibus0: <MII bus> on bge0
brgphy0: <BCM5780 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:14:51:68:33:0e
bge1: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem
0xfa510000-0xfa51ffff,0xfa500000-0xfa50ffff irq 67 at device 4.1 on pci3
bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz
miibus1: <MII bus> on bge1
brgphy1: <BCM5780 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: 00:14:51:68:33:0f
pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1
pci4: <OFW PCI bus> on pcib4
pcib5: <OFW PCI-PCI bridge> at device 4.0 on pci1
pci5: <OFW PCI bus> on pcib5
pcib6: <OFW PCI-PCI bridge> at device 5.0 on pci1
pci6: <OFW PCI bus> on pcib6
pcib7: <OFW PCI-PCI bridge> at device 6.0 on pci1
pci7: <OFW PCI bus> on pcib7
pcib8: <OFW PCI-PCI bridge> at device 7.0 on pci1
pci8: <OFW PCI bus> on pcib8
gem0: <Apple Shasta GMAC Ethernet> mem 0xfa200000-0xfa3fffff at device 15.0 on
pci8
gem0: invalid MAC address
device_attach: gem0 attach returned 6
pcib9: <OFW PCI-PCI bridge> at device 8.0 on pci1
pci9: <OFW PCI bus> on pcib9
macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci9
macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0
scc0: <Zilog Z8530 dual channel SCC> mem
0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq
23,17,18,24,19,20 on macio0
uart0: <z8530, channel A> on scc0
uart1: <z8530, channel B> on scc0
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0
iicbus1: <OFW I2C bus> on iichb1
onyx0: <Texas Instruments PCM3052 Audio Codec> at addr 0x8c on iicbus1
iicbus1: <unknown card> at addr 0x24
pcm0: <Apple I2S Audio Controller> mem
0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 28,11,12,30,15,16 on macio0
ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at device
11.0 on pci9
usbus0 on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at device
11.1 on pci9
usbus1 on ohci1
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 70 at
device 11.2 on pci9
usbus2: EHCI version 1.0
usbus2 on ehci0
pcib10: <OFW PCI-PCI bridge> at device 9.0 on pci1
pci10: <OFW PCI bus> on pcib10
atapci0: <ServerWorks K2 SATA150 controller> mem 0xfa402000-0xfa403fff irq 10
at device 12.0 on pci10
pcib1: failed to reserve resource for pcib10
atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff).
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ata4: <ATA channel> at channel 2 on atapci0
ata5: <ATA channel> at channel 3 on atapci0
ata0: <Shasta Kauai ATA Controller> mem 0xfa404000-0xfa407fff irq 38,37 at
device 13.0 on pci10
fwohci0: <1394 Open Host Controller Interface> mem 0xfa400000-0xfa400fff irq 39
at device 14.0 on pci10
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:14:51:ff:fe:35:68:78
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:14:51:35:68:78
fwe0: Ethernet address: 02:14:51:35:68:78
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: PhysicalUpperBound register is not implemented. Physical memory
access is limited to the first 4GB
fwohci0: PhysicalUpperBound = 0x00000000
fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=1, CYCLEMASTER mode
smu0: <Apple System Management Unit> on ofwbus0
iichb2: <SMU I2C controller> on smu0
iicbus2: <OFW I2C bus> on iichb2
smusat0: <SMU Satellite Sensors> at addr 0xb0 on iicbus2
iicbus2: <unknown card> at addr 0xd4
iichb3: <SMU I2C controller> on smu0
iicbus3: <OFW I2C bus> on iichb3
Timecounter "timebase" frequency 33333333 Hz quality 0
Event timer "decrementer" frequency 33333333 Hz quality 1000
Timecounters tick every 1.000 msec
firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) (me)
firewire0: bus manager 1
max66900: 2 sensors detected.
max66901: 2 sensors detected.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <NEC OHCI root HUB> at usbus0
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <NEC OHCI root HUB> at usbus1
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <NEC EHCI root HUB> at usbus2
uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 3 ports with 3 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 5 ports with 5 removable, self powered
ugen2.2: <Ralink 802.11 n WLAN> at usbus2
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD1600JS-41MVB1 10.02E01> ATA-7 SATA 2.x device
ada0: Serial Number WD-WMAP01138964
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 152627MB (312581808 512 byte sectors)
ada1 at ata3 bus 0 scbus1 target 0 lun 0
ada1: <SAMSUNG SP2504C VT100-41> ATA-7 SATA 2.x device
ada1: Serial Number S09QJ1HL952442
ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada1: 238475MB (488397168 512 byte sectors)
SMP: AP CPU #1 launched
Trying to mount root from ufs:/dev/ada0s3 [rw]...
ugen0.2: <Logitech USB Receiver> at usbus0
ukbd0 on uhub0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 2> on usbus0
kbd1 at ukbd0
ums0 on uhub0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 2> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 2> on usbus0
ugen1.2: <Primax Electronics Apple Optical USB Mouse> at usbus1
ums1 on uhub1
ums1: <Primax Electronics Apple Optical USB Mouse, class 0/0, rev 1.10/1.10,
addr 2> on usbus1
ums1: 4 buttons and [XYZW] coordinates ID=0
bge0: link state changed to DOWN
run0 on uhub2
run0: <1.0> on usbus2
run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address
7c:dd:90:04:e7:0c
ieee80211_load_module: load the wlan_amrr module by hand for now.
wlan0: Ethernet address: 7c:dd:90:04:e7:0c
run0: firmware RT3071 ver. 0.33 loaded
wlan0: link state changed to UP
hw.machine: powerpc
hw.model: IBM PowerPC 970MP
hw.ncpu: 2
hw.byteorder: 4321
hw.physmem: 2651049984
hw.usermem: 2223316992
hw.pagesize: 4096
hw.machine_arch: powerpc64
hw.realmem: 2651049984
hw.uma_mdpages: 75462
hw.platform: powermac
hw.floatingpoint: 1
hw.altivec: 1
--
You are receiving this mail because:
You are on the CC list for the bug.
More information about the freebsd-ppc
mailing list