OpenJDK for PowerPC64

[Curtis Hamilton]

Steve,

I'll work on the patch.  In the meantime, if you'd like to give them a try,
I've built OpenJDK7/8 Zero VM for powerpc64.  It's available at the below
URL:

https://drive.google.com/folderview?id=0Bz7VO-WP3rlpM3BabUd6ejlya3c&usp=shar
ing



-Curtis

-----Original Message-----
From: Steve Wills [mailto:swills at FreeBSD.org] 
Sent: Friday, October 30, 2015 9:30 AM
To: Curtis Hamilton <hamiltcl at verizon.net>; 'Justin Hibbits'
<jrh29 at alumni.cwru.edu>
Cc: 'FreeBSD PowerPC ML' <freebsd-ppc at freebsd.org>
Subject: Re: OpenJDK for PowerPC64

I recently tried to build lang/gcc on powerpc with the JAVA option on and
got what I think are similar errors with libtool. If you could provide a
patch for what you had to change to get it to work, that'd be most
appreciated. It built fine without the JAVA option, but I did have to turn
on the BOOTSTRAP option in both cases to get it to build on powerpc. Though
it does add a considerable amount of build time, I think something like this
in lang/gcc:

OPTIONS_DEFAULT_powerpc64=     BOOTSTRAP

might be called for.

If we can get the JAVA stuff working, I might even consider making that
default if that would mean it would be usable as a bootstrap for
lang/openjdk[78]. Or maybe we leave it off by default, but use it to build a
powerpc version of java/bootstrap-openjdk.

Steve

On 10/29/2015 18:54, Curtis Hamilton wrote:
> It's been a while, but I'll have to take a look and see if I 
> documented the changes I made, other than adding java to the list of 
> the build languages in the "Makefile".  Changing the makefile was 
> simple, but I remember that not every version of GCC would build GCJ.  
> GCC48 and GCC49 failed with internal compiler errors.  I was able to build
with GCC47 and GCC5, but there was an
> issue during stage 3 of each build with libtool errors.   To get past this
> error I had to make changes to the build order of the GCJ libraries.
> 
> Curtis
> 
> -----Original Message-----
> From: chmeeedalf at gmail.com [mailto:chmeeedalf at gmail.com] On Behalf Of 
> Justin Hibbits
> Sent: Thursday, October 29, 2015 12:11 PM
> To: Curtis Hamilton <hamiltcl at verizon.net>
> Cc: FreeBSD PowerPC ML <freebsd-ppc at freebsd.org>
> Subject: Re: OpenJDK for PowerPC64
> 
> Thanks!  Did you need to patch anything for gcc to build java, or did 
> you need to just tell it to build?  I remember when I started looking 
> at it a few years ago there were some things needed, but I can't recall
what I did.
> It's not difficult to add java to the port for powerpc, so if your 
> changes were trivial, or you had no changes, that could be a good 
> first step for us to add this to the ports tree.
> 
> - Justin
> 
> On Mon, Oct 26, 2015 at 3:14 PM, Curtis Hamilton 
> <hamiltcl at verizon.net>
> wrote:
>> I don't have a wiki page.  My initial success was in building the 
>> mercurial
>> OpenJDK7 BSD-Port, using the attached build script and instructions 
>> obtained from the OpenJDK Wiki Darwin9Build
>> (https://wiki.openjdk.java.net/display/BSDPort/Darwin9Build) section.
>> Subsequently, I used information from the arm patch to modify the 
>> ports Makefile and build the ports distribution.  Other than what's 
>> in the make file patch, no other patches were needed, as I used the 
>> mercurial build as the bootstrap.
>>
>> The key for non-x86 builds is the bootstrap.  I used the GCC java 
>> tools and created a bootstrap (/usr/local/bootstrap-openjdk) using 
>> sym
> links to the
>> GCC java executables in /usr/local/bin.   I can provide more details if
>> needed, however, building GCC java was not as straight forward as it 
>> is not a configurable option for non-x86 GCC builds.  I had to modify 
>> the port Makefile.
>>
>> Regards,
>>
>> Curtis
>>
>>
>> -----Original Message-----
>> From: chmeeedalf at gmail.com [mailto:chmeeedalf at gmail.com] On Behalf Of 
>> Justin Hibbits
>> Sent: Monday, October 26, 2015 3:26 PM
>> To: Curtis Hamilton <hamiltcl at verizon.net>
>> Cc: FreeBSD PowerPC ML <freebsd-ppc at freebsd.org>
>> Subject: Re: OpenJDK for PowerPC64
>>
>> On Mon, Oct 26, 2015 at 10:19 AM, Curtis Hamilton 
>> <hamiltcl at verizon.net>
>> wrote:
>>> Here is my contribution to all those interested in keeping the 
>>> PowerPC relevant.  I've been successful in building OpenJDK7 using 
>>> Zero VM for PPC64.  The binaries for openjdk7 for powerpc64 can be 
>>> found at the below
>>> URL:
>>>
>>> https://drive.google.com/folderview?id=0Bz7VO-WP3rlpM3BabUd6ejlya3c&
>>> u
>>> s
>>> p=shar
>>> ing
>>>
>>> Give them a try and provide any feedback to the list.
>>>
>>> Enjoy!
>>>
>>> BTW: OpenJDK8 may soon be on the way!
>>
>> That's fantastic!  I'll try this soon on my G5.  Do you have any wiki 
>> page with build steps, or even better a port change to add this to ports?
>>
>> - Justin
> 
> _______________________________________________
> freebsd-ppc at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-ppc
> To unsubscribe, send any mail to "freebsd-ppc-unsubscribe at freebsd.org"
>