fan funning high on base system

[Justin Hibbits]

Nope, just the kernel.  From /usr/src or wherever your source tree is
located apply the patch and run 'make buildkernel' followed by, if
successful, 'make installkernel'

-Justin
On Jul 13, 2015 20:20, "Herminio Hernandez, Jr." <
herminio.hernandezjr at gmail.com> wrote:

> would I have to recompile the port and which port if so. Apologies if
> these seem simple questions. FreeBSD is very new for me.
>
> On Mon, Jul 13, 2015 at 10:16 PM, Justin Hibbits <jrh29 at alumni.cwru.edu>
> wrote:
>
>> If you would rather stick with 10, here's a patch that should fix the
>> problem.  That said, there are quite a few changes in 11-current that
>> haven't made their way into 10-stable (partially out of my laziness,
>> partially because they're intrusive), so 11-current is better overall
>> (I run it on all my machines).
>>
>> - Justin
>>
>> On Mon, Jul 13, 2015 at 7:56 PM, Herminio Hernandez, Jr.
>> <herminio.hernandezjr at gmail.com> wrote:
>> > I am downloading 11 current
>> >
>> > On Mon, Jul 13, 2015 at 9:50 PM, Herminio Hernandez, Jr.
>> > <herminio.hernandezjr at gmail.com> wrote:
>> >>
>> >> I would like to file a bug report on this but I am not sure what I
>> would
>> >> file it against...
>> >>
>> >> On Mon, Jul 13, 2015 at 9:49 PM, Herminio Hernandez, Jr.
>> >> <herminio.hernandezjr at gmail.com> wrote:
>> >>>
>> >>> I am running 10.1 where do I get 11 current? I am thinking it is a bug
>> >>> cause while dmesg is giving me those warnings I am getting this in
>> sysctl
>> >>>
>> >>> $ sudo sysctl -a |grep adt746x
>> >>> device    adt746x
>> >>> dev.adt746x.%parent:
>> >>> dev.adt746x.0.%desc: Apple Thermostat Unit ADT746X
>> >>> dev.adt746x.0.%driver: adt746x
>> >>> dev.adt746x.0.%location: addr=0x5c
>> >>> dev.adt746x.0.%pnpinfo: name=fan compat=adt7467
>> >>> dev.adt746x.0.%parent: iicbus0
>> >>> dev.adt746x.0.fans.main_enclosure.pwm: 5
>> >>> dev.adt746x.0.sensors.cpu_core.volt: 191
>> >>> dev.adt746x.0.sensors.pwr/memory_bottomside.temp: 32.0C
>> >>> dev.adt746x.0.sensors.cpu_bottomside.temp: 32.0C
>> >>> dev.adt746x.0.sensors.gpu_bottomside.temp: 35.0C
>> >>> dev.adt746x.0.sensors.rear_main_enclosure.rpm: 7616
>> >>>
>> >>>
>> >>> On Mon, Jul 13, 2015 at 9:35 PM, Justin Hibbits <
>> jrh29 at alumni.cwru.edu>
>> >>> wrote:
>> >>>>
>> >>>> Hi Herminio,
>> >>>>
>> >>>> Are you running 10.x?  If so, could you try again with 11-CURRENT?  I
>> >>>> fixed a sign bug a few months ago, but haven't MFC'd it (or a host of
>> >>>> other bugfixes), so that may fix your problem.
>> >>>>
>> >>>> - Justin
>> >>>>
>> >>>> On Mon, Jul 13, 2015 at 7:29 PM, Herminio Hernandez, Jr.
>> >>>> <herminio.hernandezjr at gmail.com> wrote:
>> >>>> > Justin,
>> >>>> >
>> >>>> > Right now I have openbox running, but my fan is going crazy with
>> the
>> >>>> > system
>> >>>> > on idle. My machine is not hot at all but I am seeing this in dmeg,
>> >>>> >
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (PWR/MEMORY BOTTOMSIDE: 255.0 C)
>> exceeds
>> >>>> > critical temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (PWR/MEMORY BOTTOMSIDE: 255.0 C)
>> exceeds
>> >>>> > critical temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (CPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (PWR/MEMORY BOTTOMSIDE: 255.0 C)
>> exceeds
>> >>>> > critical temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (PWR/MEMORY BOTTOMSIDE: 255.0 C)
>> exceeds
>> >>>> > critical temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds
>> >>>> > critical
>> >>>> > temperature (80.0 C); count=1
>> >>>> > $
>> >>>> >
>> >>>> >
>> >>>> > On Sun, Jul 12, 2015 at 10:01 PM, Herminio Hernandez Jr.
>> >>>> > <herminio.hernandezjr at gmail.com> wrote:
>> >>>> >>
>> >>>> >> Once I finished building Xorg and my video drivers, I did a
>> reboot.
>> >>>> >> Then
>> >>>> >> logged in again and started X. All was good and my fans were
>> quiet.
>> >>>> >> Now on
>> >>>> >> to build my DE!
>> >>>> >>
>> >>>> >> Sent from my iPhone
>> >>>> >>
>> >>>> >> On Jul 12, 2015, at 12:31 PM, Justin Hibbits <
>> jrh29 at alumni.cwru.edu>
>> >>>> >> wrote:
>> >>>> >>
>> >>>> >> Hi,
>> >>>> >>
>> >>>> >> On Jul 12, 2015 8:17 AM, "Herminio Hernandez Jr"
>> >>>> >> <herminio.hernandezjr at gmail.com> wrote:
>> >>>> >> >
>> >>>> >> > I have the base system installed on my iBook G4, but the fans
>> are
>> >>>> >> > running like crazy. During the install I selected the powerd
>> >>>> >> > service to
>> >>>> >> > control cpu scaling, but I am not sure if it is working. It
>> could
>> >>>> >> > since I am
>> >>>> >> > installing the port for xorg I just to be sure that there is not
>> >>>> >> > another
>> >>>> >> > port I need to install to manage cpu and fans on powerpc.
>> Thanks!
>> >>>> >> >
>> >>>> >> > --
>> >>>> >> > Herminio Hernandez Jr <herminio.hernandezjr at gmail.com>
>> >>>> >>
>> >>>> >> The fans should be temperature controlled, which can be disabled
>> >>>> >> through
>> >>>> >> the machdep.manage_fans sysctl. All temperatures and fan speeds
>> can
>> >>>> >> be seen
>> >>>> >> with sysctl as well. I think the iBook uses the adt746x, but you
>> can
>> >>>> >> just
>> >>>> >> grep for 'temp', 'pwm', and 'rpm' for the data, maybe a sensor is
>> >>>> >> finding a
>> >>>> >> really high temperature. If you're building anything the
>> temperature
>> >>>> >> does
>> >>>> >> sound and the fans go nuts, but afterwards they should quiet down.
>> >>>> >>
>> >>>> >> -Justin
>> >>>> >
>> >>>> >
>> >>>
>> >>>
>> >>
>> >
>>
>
>