Has source been updated with Hibbits' recent patches?
Super Bisquit
superbisquit at gmail.com
Tue Jan 31 06:23:52 UTC 2012
I've rebuilt the kernel with wi and et enabled along with wlan.
The miibus manual page mentions gem and the interface is listed as a route
that ukphy-miibus has to go through.
See the attached files.
The brightness patch isn't working for me either.
On Mon, Jan 30, 2012 at 11:11 AM, Super Bisquit <superbisquit at gmail.com>wrote:
> Okay,
> I rebuilt the kernel.
> Modules needed are miibus, if_et, cardbus, and pccard.
> Not working as of yet.
> I'll rebuild the kernel a second time.
>
> From the forth prompt, I typed,"setenv boot-device hd0,20"
> Is that the proper command?
>
>
> On Fri, Jan 27, 2012 at 4:53 PM, Super Bisquit <superbisquit at gmail.com>
> wrote:
> >
> > Here is some information that may help.
> > The linux firmware image is agere_sta_fw.bin.
> > Hardware identity is 0005:0001:0001:0002.
> > Station identity is 001f:0001:0008:0046.
> > Firmware is determined as Lucent/Agere 8.70.
> > I'll try the patch and tell you how it works.
> >
> >
> >
> > On 1/27/12, Justin Hibbits <chmeeedalf at gmail.com> wrote:
> > > 2012/1/27 Alexey Dokuchaev <danfe at freebsd.org>
> > >
> > >> On Thu, Jan 26, 2012 at 09:10:40PM -0500, Justin Hibbits wrote:
> > >> > Oh, I forgot, you need to manually build the if_wi module (go into /
> > >> > usr/src/sys/modules/wi and make), because it's not included in the
> > >> > modules Makefile for powerpc.
> > >>
> > >> If it works fine, why is it not enabled by default on ppc?
> > >>
> > >> ./danfe
> > >>
> > >
> > > I don't know if it works fine :) Plus, I forgot to enable it in my
> patch.
> > > Here's another patch that does enable it.
> > >
> > > Super, you can try the attached patch.
> > >
> > > - Justin
> > >
>
-------------- next part --------------
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT-201102 #2: Mon Jan 30 12:31:31 EST 2012
root at tima.tiza:/usr/obj/usr/src/sys/MYKERNEL powerpc
Preloaded elf kernel "/boot/kernel/kernel" at 0xa9c000.
cpu0: Motorola PowerPC 7455 revision 3.3, 800.22 MHz
cpu0: Features 9c000000<PPC32,ALTIVEC,FPU,MMU>
cpu0: L1 I-cache enabled, L1 D-cache enabled
cpu0: 256KB L2 cache, L3 cache disabled
cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
real memory = 790654976 (754 MB)
available KVA = 519380991 (495 MB)
Physical memory chunk(s):
0x00098000 - 0x000fffff, 425984 bytes (104 pages)
0x00c2b000 - 0x00ffffff, 4018176 bytes (981 pages)
0x01800000 - 0x017fffff, 0 bytes (0 pages)
0x01813000 - 0x01bfffff, 4116480 bytes (1005 pages)
0x01c3a000 - 0x2eb68fff, 754118656 bytes (184111 pages)
avail memory = 760041472 (724 MB)
ULE: setup cpu 0
wlan: mac acl policy registered
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
firmware: 'isp_1040' version 1: 22944 bytes loaded at 0x6fc9c4
ispfw: registered firmware <isp_1040>
firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0x702364
ispfw: registered firmware <isp_1040_it>
firmware: 'isp_1080' version 1: 31350 bytes loaded at 0x70a412
ispfw: registered firmware <isp_1080>
firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0x711e88
ispfw: registered firmware <isp_1080_it>
firmware: 'isp_12160' version 1: 28050 bytes loaded at 0x71bd4c
ispfw: registered firmware <isp_12160>
firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0x722ade
ispfw: registered firmware <isp_12160_it>
firmware: 'isp_2100' version 1: 76770 bytes loaded at 0x72c97a
ispfw: registered firmware <isp_2100>
firmware: 'isp_2200' version 1: 77214 bytes loaded at 0x73f55c
ispfw: registered firmware <isp_2200>
firmware: 'isp_2300' version 1: 106640 bytes loaded at 0x7522fa
ispfw: registered firmware <isp_2300>
firmware: 'isp_2322' version 1: 120466 bytes loaded at 0x76c38a
ispfw: registered firmware <isp_2322>
firmware: 'isp_2400' version 1: 178924 bytes loaded at 0x78d584
ispfw: registered firmware <isp_2400>
firmware: 'isp_2400_multi' version 1: 195276 bytes loaded at 0x7c5fc8
ispfw: registered firmware <isp_2400_multi>
firmware: 'isp_2500' version 1: 141884 bytes loaded at 0x8034c4
ispfw: registered firmware <isp_2500>
firmware: 'isp_2500_multi' version 1: 166508 bytes loaded at 0x835018
ispfw: registered firmware <isp_2500_multi>
kbd0 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
openfirm: <Open Firmware control device>
nexus0: <Open Firmware Nexus device>
cpulist0: <Open Firmware CPU Group> on nexus0
cpu0: <Open Firmware CPU> on cpulist0
sc1: no video adapter found.
nexus0: <chosen>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <memory>, type memory (no driver attached)
sc1: no video adapter found.
nexus0: <openprom>, type BootROM (no driver attached)
sc1: no video adapter found.
nexus0: <rom>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <options>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <aliases>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <packages>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <firewire-disk-mode>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <pseudo-hid>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <pseudo-sound>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <multiboot>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <diagnostics>, type (unknown) (no driver attached)
powermac_nvram0: <Apple NVRAM> on nexus0
powermac_nvram0: bank0 generation 384, bank1 generation 383
sc1: no video adapter found.
unin0: <Apple UniNorth System Controller> on nexus0
unin0: Version 192
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 42 on unin0
unin mapdev: start f8001000, len 4095
iichb0: Revision: A1
iicbus0: <OFW I2C bus> on iichb0
sc1: no video adapter found.
pcib0: <Apple UniNorth Host-PCI bridge> on nexus0
pci0: <OFW PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x106b, dev=0x0027, revid=0x00
domain=0, bus=0, slot=11, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0110, revid=0xb2
domain=0, bus=0, slot=16, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=0
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0x91000000, size 24, enabled
map[14]: type Prefetchable Memory, range 32, base 0x98000000, size 27, enabled
agp0: <Apple UniNorth AGP Bridge> on hostb0
agp0: allocating GATT for aperture of size 256M
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x98000000-0x9fffffff irq 48 at device 16.0 on pci0
sc1: no video adapter found.
pcib1: <Apple UniNorth Host-PCI bridge> on nexus0
pci1: <OFW PCI bus> on pcib1
pci1: domain=1, physical bus=0
found-> vendor=0x106b, dev=0x0025, revid=0x00
domain=1, bus=0, slot=23, func=0
class=ff-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 32, base 0x80000000, size 19, enabled
found-> vendor=0x106b, dev=0x0026, revid=0x00
domain=1, bus=0, slot=24, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x03 (750 ns), maxlat=0x56 (21500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x80081000, size 12, enabled
found-> vendor=0x106b, dev=0x0026, revid=0x00
domain=1, bus=0, slot=25, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x03 (750 ns), maxlat=0x56 (21500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x80080000, size 12, enabled
found-> vendor=0x106b, dev=0x0028, revid=0x00
domain=1, bus=0, slot=11, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x2220, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
macio0: <Pangea I/O Controller> mem 0x80000000-0x8007ffff at device 23.0 on pci1
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
openpic0: Version 1.2, supports 4 CPUs and 64 irqs
macgpio0: <MacIO GPIO Controller> mem 0x50-0x7f on macio0
pmuextint0: <Apple PMU99 External Interrupt> irq 47 on macgpio0
macgpio0: <programmer-switch, programmer-switch> irq 55 (no driver attached)
macgpio0: <extint-gpio3, extint-gpio3> irq 49 (no driver attached)
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 22,5,6,23,7,8 on macio0
scc0: resetting hardware
uart0: <z8530, channel A> on scc0
uart0: fast interrupt
uart1: <z8530, channel B> on scc0
uart1: fast interrupt
scc0: fast interrupt
pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 30,1,2 on macio0
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 18f0000, 10000; 0xdece1000 -> 18f0000
pmu0: <Apple PMU99 Controller> mem 0x16000-0x17fff irq 25 on macio0
pmu0: PMU child <rtc>
pmu0: PMU child <power-mgt>
pmu0: registered as a time-of-day clock (resolution 1000us, adjustment 0.000500000s)
macio0: <backlight, backlight> (no driver attached)
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 26 on macio0
iichb1: Revision: A1
iicbus1: <OFW I2C bus> on iichb1
tumbler0: <Texas Instruments TAS3001 Audio Codec> at addr 0x68 on iicbus1
ata0: <Apple MacIO Ultra ATA Controller> mem 0x1f000-0x1ffff,0x8a00-0x8aff irq 19,11 on macio0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x20001
macio0: <network, radio> mem 0x30000-0x300ff,0x1a000-0x1a0ff,0-0xff irq 57 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0x80081000-0x80081fff irq 27 at device 24.0 on pci1
uninorth mapdev: start 80081000, len 4096
usbus0: <OHCI (generic) USB controller> on ohci0
usbus0: bpf attached
ohci0: usbpf attached
ohci1: <OHCI (generic) USB controller> mem 0x80080000-0x80080fff irq 28 at device 25.0 on pci1
uninorth mapdev: start 80080000, len 4096
usbus1: <OHCI (generic) USB controller> on ohci1
usbus1: bpf attached
ohci1: usbpf attached
sc1: no video adapter found.
pcib2: <Apple UniNorth Host-PCI bridge> on nexus0
pci2: <OFW PCI bus> on pcib2
pci2: domain=2, physical bus=0
found-> vendor=0x106b, dev=0x0030, revid=0x00
domain=2, bus=0, slot=14, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf5000000, size 12, enabled
found-> vendor=0x106b, dev=0x0024, revid=0x00
domain=2, bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x84a0, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=0
map[10]: type Memory, range 32, base 0xf5200000, size 21, enabled
found-> vendor=0x106b, dev=0x0029, revid=0x00
domain=2, bus=0, slot=11, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
fwohci0: <Apple Pangea> mem 0xf5000000-0xf5000fff irq 40 at device 14.0 on pci2
uninorth mapdev: start f5000000, len 4096
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:0a:95:ff:fe:93:a8:20
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0a:95:93:a8:20
fwe0: bpf attached
fwe0: Ethernet address: 02:0a:95:93:a8:20
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
gem0: <Apple Pangea GMAC Ethernet> mem 0xf5200000-0xf53fffff irq 41 at device 15.0 on pci2
uninorth mapdev: start f5200000, len 2097152
gem0: flags=0x4
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x0004de, model 0x000e, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: bpf attached
gem0: Ethernet address: 00:0a:95:93:a8:20
sc0: <System console> on nexus0
sc0: Unknown <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
procfs registered
Timecounter "timebase" frequency 24959250 Hz quality 0
Event timer "decrementer" frequency 24959250 Hz quality 1000
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
ata0: Identifying devices: 00020001
ata0: New devices: 00020001
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Apple> at usbus0
uhub0: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Apple> at usbus1
uhub1: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting UDMA66
ad0: 57241MB <Seagate ST360015A 3.31> at ata0-master UDMA66
ad0: 117231408 sectors [116301C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
acd0: setting UDMA33
acd0: <TOSHIBA DVD-ROM SD-R1312/1A06> CDRW drive at ata0 as slave
acd0: read 5512KB/s (5512KB/s) write 5512KB/s (5512KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: Mixer "vol":
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <Mitsumi Electric> at usbus0
uhub2: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.00, addr 2> on usbus0
uhub2: 3 ports with 2 removable, bus powered
ugen0.3: <Logitech> at usbus0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/54.00, addr 3> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
ugen0.4: <Mitsumi Electric> at usbus0
ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.00, addr 4> on usbus0
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.00, addr 4> on usbus0
(probe0:sbp0:0:0:0): Error 22, Unretryable error
(probe1:sbp0:0:1:0): Error 22, Unretryable error
(probe2:sbp0:0:2:0): Error 22, Unretryable error
(probe3:sbp0:0:3:0): Error 22, Unretryable error
(probe4:sbp0:0:4:0): Error 22, Unretryable error
(probe5:sbp0:0:5:0): Error 22, Unretryable error
(probe6:sbp0:0:6:0): Error 22, Unretryable error
Trying to mount root from ufs:/dev/ad0s3 [rw]...
start_init: trying /sbin/init
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
ifa_add_loopback_route: insertion failed
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
module_register: module et/miibus already exists!
Module et/miibus failed to register: 17
module_register: module pci/et already exists!
Module pci/et failed to register: 17
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
ifa_add_loopback_route: insertion failed
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...17 11 6 4 4 1 0 0 0 done
All buffers synced.
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT-201102 #2: Mon Jan 30 12:31:31 EST 2012
root at tima.tiza:/usr/obj/usr/src/sys/MYKERNEL powerpc
Preloaded elf kernel "/boot/kernel/kernel" at 0xa9c000.
cpu0: Motorola PowerPC 7455 revision 3.3, 800.24 MHz
cpu0: Features 9c000000<PPC32,ALTIVEC,FPU,MMU>
cpu0: L1 I-cache enabled, L1 D-cache enabled
cpu0: 256KB L2 cache, L3 cache disabled
cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
real memory = 790654976 (754 MB)
available KVA = 519380991 (495 MB)
Physical memory chunk(s):
0x00098000 - 0x000fffff, 425984 bytes (104 pages)
0x00c2b000 - 0x00ffffff, 4018176 bytes (981 pages)
0x01800000 - 0x017fffff, 0 bytes (0 pages)
0x01813000 - 0x01bfffff, 4116480 bytes (1005 pages)
0x01c3a000 - 0x2eb68fff, 754118656 bytes (184111 pages)
avail memory = 760041472 (724 MB)
ULE: setup cpu 0
wlan: mac acl policy registered
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
firmware: 'isp_1040' version 1: 22944 bytes loaded at 0x6fc9c4
ispfw: registered firmware <isp_1040>
firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0x702364
ispfw: registered firmware <isp_1040_it>
firmware: 'isp_1080' version 1: 31350 bytes loaded at 0x70a412
ispfw: registered firmware <isp_1080>
firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0x711e88
ispfw: registered firmware <isp_1080_it>
firmware: 'isp_12160' version 1: 28050 bytes loaded at 0x71bd4c
ispfw: registered firmware <isp_12160>
firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0x722ade
ispfw: registered firmware <isp_12160_it>
firmware: 'isp_2100' version 1: 76770 bytes loaded at 0x72c97a
ispfw: registered firmware <isp_2100>
firmware: 'isp_2200' version 1: 77214 bytes loaded at 0x73f55c
ispfw: registered firmware <isp_2200>
firmware: 'isp_2300' version 1: 106640 bytes loaded at 0x7522fa
ispfw: registered firmware <isp_2300>
firmware: 'isp_2322' version 1: 120466 bytes loaded at 0x76c38a
ispfw: registered firmware <isp_2322>
firmware: 'isp_2400' version 1: 178924 bytes loaded at 0x78d584
ispfw: registered firmware <isp_2400>
firmware: 'isp_2400_multi' version 1: 195276 bytes loaded at 0x7c5fc8
ispfw: registered firmware <isp_2400_multi>
firmware: 'isp_2500' version 1: 141884 bytes loaded at 0x8034c4
ispfw: registered firmware <isp_2500>
firmware: 'isp_2500_multi' version 1: 166508 bytes loaded at 0x835018
ispfw: registered firmware <isp_2500_multi>
kbd0 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
openfirm: <Open Firmware control device>
nexus0: <Open Firmware Nexus device>
cpulist0: <Open Firmware CPU Group> on nexus0
cpu0: <Open Firmware CPU> on cpulist0
sc1: no video adapter found.
nexus0: <chosen>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <memory>, type memory (no driver attached)
sc1: no video adapter found.
nexus0: <openprom>, type BootROM (no driver attached)
sc1: no video adapter found.
nexus0: <rom>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <options>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <aliases>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <packages>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <firewire-disk-mode>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <pseudo-hid>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <pseudo-sound>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <multiboot>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <diagnostics>, type (unknown) (no driver attached)
powermac_nvram0: <Apple NVRAM> on nexus0
powermac_nvram0: bank0 generation 384, bank1 generation 383
sc1: no video adapter found.
unin0: <Apple UniNorth System Controller> on nexus0
unin0: Version 192
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 42 on unin0
unin mapdev: start f8001000, len 4095
iichb0: Revision: A1
iicbus0: <OFW I2C bus> on iichb0
sc1: no video adapter found.
pcib0: <Apple UniNorth Host-PCI bridge> on nexus0
pci0: <OFW PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x106b, dev=0x0027, revid=0x00
domain=0, bus=0, slot=11, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0110, revid=0xb2
domain=0, bus=0, slot=16, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=0
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0x91000000, size 24, enabled
map[14]: type Prefetchable Memory, range 32, base 0x98000000, size 27, enabled
agp0: <Apple UniNorth AGP Bridge> on hostb0
agp0: allocating GATT for aperture of size 256M
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x98000000-0x9fffffff irq 48 at device 16.0 on pci0
sc1: no video adapter found.
pcib1: <Apple UniNorth Host-PCI bridge> on nexus0
pci1: <OFW PCI bus> on pcib1
pci1: domain=1, physical bus=0
found-> vendor=0x106b, dev=0x0025, revid=0x00
domain=1, bus=0, slot=23, func=0
class=ff-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 32, base 0x80000000, size 19, enabled
found-> vendor=0x106b, dev=0x0026, revid=0x00
domain=1, bus=0, slot=24, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x03 (750 ns), maxlat=0x56 (21500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x80081000, size 12, enabled
found-> vendor=0x106b, dev=0x0026, revid=0x00
domain=1, bus=0, slot=25, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x03 (750 ns), maxlat=0x56 (21500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x80080000, size 12, enabled
found-> vendor=0x106b, dev=0x0028, revid=0x00
domain=1, bus=0, slot=11, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x2220, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
macio0: <Pangea I/O Controller> mem 0x80000000-0x8007ffff at device 23.0 on pci1
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
openpic0: Version 1.2, supports 4 CPUs and 64 irqs
macgpio0: <MacIO GPIO Controller> mem 0x50-0x7f on macio0
pmuextint0: <Apple PMU99 External Interrupt> irq 47 on macgpio0
macgpio0: <programmer-switch, programmer-switch> irq 55 (no driver attached)
macgpio0: <extint-gpio3, extint-gpio3> irq 49 (no driver attached)
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 22,5,6,23,7,8 on macio0
scc0: resetting hardware
uart0: <z8530, channel A> on scc0
uart0: fast interrupt
uart1: <z8530, channel B> on scc0
uart1: fast interrupt
scc0: fast interrupt
pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 30,1,2 on macio0
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 18f0000, 10000; 0xdece1000 -> 18f0000
pmu0: <Apple PMU99 Controller> mem 0x16000-0x17fff irq 25 on macio0
pmu0: PMU child <rtc>
pmu0: PMU child <power-mgt>
pmu0: registered as a time-of-day clock (resolution 1000us, adjustment 0.000500000s)
macio0: <backlight, backlight> (no driver attached)
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 26 on macio0
iichb1: Revision: A1
iicbus1: <OFW I2C bus> on iichb1
tumbler0: <Texas Instruments TAS3001 Audio Codec> at addr 0x68 on iicbus1
ata0: <Apple MacIO Ultra ATA Controller> mem 0x1f000-0x1ffff,0x8a00-0x8aff irq 19,11 on macio0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x20001
macio0: <network, radio> mem 0x30000-0x300ff,0x1a000-0x1a0ff,0-0xff irq 57 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0x80081000-0x80081fff irq 27 at device 24.0 on pci1
uninorth mapdev: start 80081000, len 4096
usbus0: <OHCI (generic) USB controller> on ohci0
usbus0: bpf attached
ohci0: usbpf attached
ohci1: <OHCI (generic) USB controller> mem 0x80080000-0x80080fff irq 28 at device 25.0 on pci1
uninorth mapdev: start 80080000, len 4096
usbus1: <OHCI (generic) USB controller> on ohci1
usbus1: bpf attached
ohci1: usbpf attached
sc1: no video adapter found.
pcib2: <Apple UniNorth Host-PCI bridge> on nexus0
pci2: <OFW PCI bus> on pcib2
pci2: domain=2, physical bus=0
found-> vendor=0x106b, dev=0x0030, revid=0x00
domain=2, bus=0, slot=14, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf5000000, size 12, enabled
found-> vendor=0x106b, dev=0x0024, revid=0x00
domain=2, bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x84a0, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=0
map[10]: type Memory, range 32, base 0xf5200000, size 21, enabled
found-> vendor=0x106b, dev=0x0029, revid=0x00
domain=2, bus=0, slot=11, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
fwohci0: <Apple Pangea> mem 0xf5000000-0xf5000fff irq 40 at device 14.0 on pci2
uninorth mapdev: start f5000000, len 4096
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:0a:95:ff:fe:93:a8:20
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0a:95:93:a8:20
fwe0: bpf attached
fwe0: Ethernet address: 02:0a:95:93:a8:20
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
gem0: <Apple Pangea GMAC Ethernet> mem 0xf5200000-0xf53fffff irq 41 at device 15.0 on pci2
uninorth mapdev: start f5200000, len 2097152
gem0: flags=0x4
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x0004de, model 0x000e, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: bpf attached
gem0: Ethernet address: 00:0a:95:93:a8:20
sc0: <System console> on nexus0
sc0: Unknown <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
procfs registered
Timecounter "timebase" frequency 24959250 Hz quality 0
Event timer "decrementer" frequency 24959250 Hz quality 1000
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
ata0: Identifying devices: 00020001
ata0: New devices: 00020001
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Apple> at usbus0
uhub0: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Apple> at usbus1
uhub1: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting UDMA66
ad0: 57241MB <Seagate ST360015A 3.31> at ata0-master UDMA66
ad0: 117231408 sectors [116301C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
acd0: setting UDMA33
acd0: <TOSHIBA DVD-ROM SD-R1312/1A06> CDRW drive at ata0 as slave
acd0: read 5512KB/s (5512KB/s) write 5512KB/s (5512KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: Mixer "vol":
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <Mitsumi Electric> at usbus0
uhub2: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.00, addr 2> on usbus0
uhub2: 3 ports with 2 removable, bus powered
ugen0.3: <Logitech> at usbus0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/54.00, addr 3> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
ugen0.4: <Mitsumi Electric> at usbus0
ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.00, addr 4> on usbus0
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.00, addr 4> on usbus0
(probe0:sbp0:0:0:0): Error 22, Unretryable error
(probe1:sbp0:0:1:0): Error 22, Unretryable error
(probe2:sbp0:0:2:0): Error 22, Unretryable error
(probe3:sbp0:0:3:0): Error 22, Unretryable error
(probe4:sbp0:0:4:0): Error 22, Unretryable error
(probe5:sbp0:0:5:0): Error 22, Unretryable error
(probe6:sbp0:0:6:0): Error 22, Unretryable error
Trying to mount root from ufs:/dev/ad0s3 [rw]...
start_init: trying /sbin/init
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
pid 2008 (gpg-agent), uid 1001: exited on signal 11
pid 2077 (gpg-agent), uid 1001: exited on signal 11
-------------- next part --------------
A non-text attachment was scrubbed...
Name: MYKERNEL
Type: application/octet-stream
Size: 7390 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-ppc/attachments/20120131/0da015d8/MYKERNEL.obj
More information about the freebsd-ppc
mailing list