Has source been updated with Hibbits' recent patches?
Justin Hibbits
chmeeedalf at gmail.com
Fri Jan 27 02:12:59 UTC 2012
Oh, I forgot, you need to manually build the if_wi module (go into /
usr/src/sys/modules/wi and make), because it's not included in the
modules Makefile for powerpc.
- Justin
On Jan 26, 2012, at 1:54 PM, Super Bisquit wrote:
> Okay.
> Is there a new patch available? Would you like for me to boot the
> device with a Linux PPC disk to see what exact card it is?
>
> On 1/20/12, Super Bisquit <superbisquit at gmail.com> wrote:
>> No wi0 comes up but there is the ukphy0 which is an 802.3u device.
>> There is a chance of recognizing the exact card with an OpenBSD or
>> Linux
>> PowerPC disk.
>>
>> On Thu, Jan 19, 2012 at 3:21 PM, Justin Hibbits
>> <chmeeedalf at gmail.com>wrote:
>>
>>> On Wed, Jan 18, 2012 at 9:52 PM, Super Bisquit
>>> <superbisquit at gmail.com>wrote:
>>>
>>>> I've successfully applied the patches. Now, is the next step
>>>> rebuilding
>>>> the kernel?
>>>> tima# kldstat
>>>> Id Refs Address Size Name
>>>> 1 24 0x100000 923e20 kernel
>>>> 2 1 0xd1480000 1d000 if_wi.ko
>>>> 3 9 0xd149d000 7a000 wlan.ko
>>>> 4 1 0xd1523000 13000 wlan_acl.ko
>>>> 5 1 0xd1536000 12000 wlan_amrr.ko
>>>> 6 1 0xd1548000 17000 wlan_ccmp.ko
>>>> 7 1 0xd155f000 12000 wlan_rssadapt.ko
>>>> 8 1 0xd1571000 14000 wlan_tkip.ko
>>>> 9 1 0xd1585000 12000 wlan_wep.ko
>>>> 10 1 0xd1597000 11000 wlan_xauth.ko
>>>>
>>>> tima# ifconfig -a
>>>> usbus0: flags=10001<UP> metric 0 mtu 0
>>>> usbus1: flags=10001<UP> metric 0 mtu 0
>>>> fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>>> options=8<VLAN_MTU>
>>>> ether 02:0a:95:93:a8:20
>>>> ch 1 dma -1
>>>> gem0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0
>>>> mtu
>>>> 1500
>>>> options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
>>>> ether 00:0a:95:93:a8:20
>>>> inet 98.211.76.206 netmask 0xfffffc00 broadcast 255.255.255.255
>>>> media: Ethernet autoselect (100baseTX <full-duplex>)
>>>> status: active
>>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>>>> options=3<RXCSUM,TXCSUM>
>>>> inet 127.0.0.1 netmask 0xff000000
>>>> inet6 ::1 prefixlen 128
>>>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
>>>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>>>> tima# dmesg|grep miibus
>>>> miibus0: <MII bus> on gem0
>>>> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
>>>> interface miibus.1 already present in the KLD 'kernel'!
>>>>
>>>> tima# pciconf -l -b
>>>> hostb0 at pci0:0:11:0: class=0x060000 card=0x00000000
>>>> chip=0x0027106b
>>>> rev=0x00 hdr=0x00
>>>> vgapci0 at pci0:0:16:0: class=0x030000 card=0x00000000
>>>> chip=0x011010de
>>>> rev=0xb2 hdr=0x00
>>>> bar [10] = type Memory, range 32, base 0x91000000, size
>>>> 16777216,
>>>> enabled
>>>> bar [14] = type Prefetchable Memory, range 32, base
>>>> 0x98000000,
>>>> size 134217728, enabled
>>>> macio0 at pci1:0:23:0: class=0xff0000 card=0x00000000
>>>> chip=0x0025106b
>>>> rev=0x00 hdr=0x00
>>>> bar [10] = type Memory, range 32, base 0x80000000, size
>>>> 524288,
>>>> enabled
>>>> ohci0 at pci1:0:24:0: class=0x0c0310 card=0x00000000
>>>> chip=0x0026106b
>>>> rev=0x00 hdr=0x00
>>>> bar [10] = type Memory, range 32, base 0x80081000, size 4096,
>>>> enabled
>>>> ohci1 at pci1:0:25:0: class=0x0c0310 card=0x00000000
>>>> chip=0x0026106b
>>>> rev=0x00 hdr=0x00
>>>> bar [10] = type Memory, range 32, base 0x80080000, size 4096,
>>>> enabled
>>>> hostb1 at pci1:0:11:0: class=0x060000 card=0x00000000
>>>> chip=0x0028106b
>>>> rev=0x00 hdr=0x00
>>>> fwohci0 at pci2:0:14:0: class=0x0c0010 card=0x0030106b
>>>> chip=0x0030106b
>>>> rev=0x00 hdr=0x00
>>>> bar [10] = type Memory, range 32, base 0xf5000000, size 4096,
>>>> enabled
>>>> gem0 at pci2:0:15:0: class=0x020000 card=0x00000000 chip=0x0024106b
>>>> rev=0x00 hdr=0x00
>>>> bar [10] = type Memory, range 32, base 0xf5200000, size
>>>> 2097152,
>>>> enabled
>>>> hostb2 at pci2:0:11:0: class=0x060000 card=0x00000000
>>>> chip=0x0029106b
>>>> rev=0x00 hdr=0x00
>>>>
>>>> ima# ifconfig wlan create wlandev gem0
>>>> ifconfig: SIOCIFCREATE2: Device not configured
>>>> tima#
>>>>
>>>> Unfortunately, I'm having trouble creating the interface.
>>>>
>>>> I haven't rebuilt the kernel for the ofw brightness patch.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Tue, Jan 17, 2012 at 7:37 PM, Super Bisquit
>>>> <superbisquit at gmail.com>wrote:
>>>>
>>>>> I should have an internet connection up again in the next few
>>>>> days. I
>>>>> downloaded the two files.
>>>>> Wow. Nobody? That blows.
>>>>> Give me a few days or less to get back to you.
>>>>>
>>>>> On 1/17/12, Justin Hibbits <chmeeedalf at gmail.com> wrote:
>>>>>> On Jan 17, 2012, at 5:19 PM, Super Bisquit wrote:
>>>>>>
>>>>>>> I'm referring to the AirPort and tty/syscons brightness patches.
>>>>>>
>>>>>> No. The brightness patch may or may not go in. The Airport
>>>>>> patch
>>>>>> will go in once I get some test results (have you tested it?).
>>>>>> Nobody's given me any test results, and last time I tried I was
>>>>>> having
>>>>>> issues (attached fine, but couldn't send/receive). Haven't
>>>>>> looked at
>>>>>> it in a couple months though.
>>>>>>
>>>>>> - Justin
>>>>>>
>>>>>
>>>>
>>>>
>>> This shows to me that it hasn't found the airport card, because
>>> there's
>>> no
>>> wi0 listed in ifconfig. Can you boot verbose and send me the
>>> dmesg from
>>> that boot?
>>>
>>> - Justin
>>>
>>
More information about the freebsd-ppc
mailing list