Xorg 1.20 no mouse buttons

Ronald Klop ronald-lists at klop.ws
Sat Mar 7 09:48:19 UTC 2020 

On Thu, 05 Mar 2020 23:24:46 +0100, Michael Gmelin <freebsd at grem.de> wrote:

> 
>
>> On 5. Mar 2020, at 14:46, Ronald Klop <ronald-lists at klop.ws> wrote:
>>
>> Hi,
>>
>> I needed "sysctl kern.evdev.rcpt_mask=6" to switch from sysmouse to  
>> "hardware mouse". That fixed mouse integration with VirtualBox.
>>
>> Still have weird behaviour. Two finger swipe down & up (which normally  
>> only scrolls) makes the browser go back. With xev I see that next to  
>> logical button 4 & 5 for scrolling this also triggers logical buttons 8  
>> & 9. Swipe down presses 8 & 9 and up releases the buttons. Why?
>
> Hi,
>
> Please check/post the outputs of:
> libinput list-devices
> xinput list
> xinput list-props <mouse device id>

See atttachments. "unnamed" is the vboxmouse driver which comes with the  
virtualbox-ose-additions pkg.

Ronald.




>
> -m
>
>
>> Regards,
>> Ronald.
>>
>>
>>>> On Thu, 27 Feb 2020 19:42:34 +0100, Daniel Morante via freebsd-ports  
>>>> <freebsd-ports at freebsd.org> wrote:
>>> Roland,
>>> Your issue might be related to this bug:  
>>> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=244110
>>>> On 2/26/2020 5:29 PM, Ronald Klop wrote:
>>>> It works again.
>>>> Changed back from virtualboxvideo from drm-devel-kmod to the driver  
>>>> from virtualbox-ose-additions. But did some other changes at the same  
>>>> time also. Not sure yet what happened, but it was integration of the  
>>>> mouse with virtualbox which failed somehow.
>>>> Regards,
>>>> Ronald.
>>>>> On Wed, 26 Feb 2020 20:40:14 +0100, Ronald Klop  
>>>>> <ronald-lists at klop.ws> wrote:
>>>>> Hello,
>>>>> Since my upgrade to Xorg 1.20 things seem to work except that no  
>>>>> mouse buttons work. Pointer movement works good still.
>>>>> I'm running a fairly recent FreeBSD 13-CURRENT in VirtualBox (On  
>>>>> Windows 10). The mouse is a touchpad on my Lenovo IdeaPad laptop.
>>>>> Previously it worked using fine.
>>>>> What can I do or debug to fix this?
>>>>> Regards,
>>>>> Ronald.
>>>>> [    23.241]
>>>>> X.Org X Server 1.20.7
>>>>> X Protocol Version 11, Revision 0
>>>>> [    23.241] Build Operating System: FreeBSD 13.0-CURRENT amd64
>>>>> [    23.241] Current Operating System: FreeBSD sjakie 13.0-CURRENT  
>>>>> FreeBSD
>>>>> 13.0-CURRENT #4 r357762M: Sun Feb 16 12:16:08 CET 2020
>>>>> builder at sjakie:/data/src/obj-freebsd-current/data/src/freebsd-current/amd64.amd64/sys/GENERIC-NODEBUG  
>>>>> amd64
>>>>> [    23.241] Build Date: 22 February 2020  07:06:47AM
>>>>> [    23.241]
>>>>> [    23.241] Current version of pixman: 0.38.4
>>>>> [    23.241]     Before reporting problems, check http://wiki.x.org
>>>>>   to make sure that you have the latest version.
>>>>> [    23.241] Markers: (--) probed, (**) from config file, (==)  
>>>>> default
>>>>> setting,
>>>>>   (++) from command line, (!!) notice, (II) informational,
>>>>>   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>>>>> [    23.241] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 24
>>>>> 19:18:14 2020
>>>>> [    23.244] (==) Using system config directory
>>>>> "/usr/local/share/X11/xorg.conf.d"
>>>>> [    23.246] (==) No Layout section.  Using the first Screen section.
>>>>> [    23.246] (==) No screen section available. Using defaults.
>>>>> [    23.246] (**) |-->Screen "Default Screen Section" (0)
>>>>> [    23.246] (**) |   |-->Monitor "<default monitor>"
>>>>> [    23.247] (==) No monitor specified for screen "Default Screen  
>>>>> Section".
>>>>>   Using a default monitor configuration.
>>>>> [    23.247] (==) Automatically adding devices
>>>>> [    23.247] (==) Automatically enabling devices
>>>>> [    23.247] (==) Not automatically adding GPU devices
>>>>> [    23.247] (==) Max clients allowed: 256, resource mask: 0x1fffff
>>>>> [    23.262] (==) FontPath set to:
>>>>>   /usr/local/share/fonts/misc/,
>>>>>   /usr/local/share/fonts/TTF/,
>>>>>   /usr/local/share/fonts/OTF/,
>>>>>   /usr/local/share/fonts/Type1/,
>>>>>   /usr/local/share/fonts/100dpi/,
>>>>>   /usr/local/share/fonts/75dpi/,
>>>>>   catalogue:/usr/local/etc/X11/fontpath.d
>>>>> [    23.263] (==) ModulePath set to "/usr/local/lib/xorg/modules"
>>>>> [    23.263] (II) The server relies on udev to provide the list of  
>>>>> input
>>>>> devices.
>>>>>   If no devices become available, reconfigure udev or disable
>>>>> AutoAddDevices.
>>>>> [    23.263] (II) Loader magic: 0x435010
>>>>> [    23.263] (II) Module ABI versions:
>>>>> [    23.263]     X.Org ANSI C Emulation: 0.4
>>>>> [    23.263]     X.Org Video Driver: 24.1
>>>>> [    23.263]     X.Org XInput driver : 24.1
>>>>> [    23.263]     X.Org Server Extension : 10.0
>>>>> [    23.263] (--) PCI:*(0 at 0:2:0) 80ee:beef:0000:0000 rev 0, Mem @
>>>>> 0xe0000000/134217728, BIOS @ 0x????????/65536
>>>>> [    23.263] (II) LoadModule: "glx"
>>>>> [    23.265] (II) Loading  
>>>>> /usr/local/lib/xorg/modules/extensions/libglx.so
>>>>> [    23.292] (II) Module glx: vendor="X.Org Foundation"
>>>>> [    23.292]     compiled for 1.20.7, module version = 1.0.0
>>>>> [    23.292]     ABI class: X.Org Server Extension, version 10.0
>>>>> [    23.292] (==) Matched vboxvideo as autoconfigured driver 0
>>>>> [    23.292] (==) Matched modesetting as autoconfigured driver 1
>>>>> [    23.292] (==) Matched scfb as autoconfigured driver 2
>>>>> [    23.292] (==) Matched vesa as autoconfigured driver 3
>>>>> [    23.292] (==) Assigned the driver to the xf86ConfigLayout
>>>>> [    23.292] (II) LoadModule: "vboxvideo"
>>>>> [    23.292] (II) Loading
>>>>> /usr/local/lib/xorg/modules/drivers/vboxvideo_drv.so
>>>>> [    23.294] (II) Module vboxvideo: vendor="Oracle Corporation"
>>>>> [    23.294]     compiled for 1.20.7, module version = 1.0.1
>>>>> [    23.294]     Module class: X.Org Video Driver
>>>>> [    23.294]     ABI class: X.Org Video Driver, version 24.1
>>>>> [    23.294] (**) Load address of symbol "VBOXVIDEO" is 0x801b8d010
>>>>> [    23.294] (II) LoadModule: "modesetting"
>>>>> [    23.294] (II) Loading
>>>>> /usr/local/lib/xorg/modules/drivers/modesetting_drv.so
>>>>> [    23.295] (II) Module modesetting: vendor="X.Org Foundation"
>>>>> [    23.295]     compiled for 1.20.7, module version = 1.20.7
>>>>> [    23.295]     Module class: X.Org Video Driver
>>>>> [    23.295]     ABI class: X.Org Video Driver, version 24.1
>>>>> [    23.295] (II) LoadModule: "scfb"
>>>>> [    23.295] (II) Loading  
>>>>> /usr/local/lib/xorg/modules/drivers/scfb_drv.so
>>>>> [    23.297] (II) Module scfb: vendor="X.Org Foundation"
>>>>> [    23.297]     compiled for 1.20.7, module version = 0.0.5
>>>>> [    23.297]     ABI class: X.Org Video Driver, version 24.1
>>>>> [    23.297] (II) LoadModule: "vesa"
>>>>> [    23.297] (II) Loading  
>>>>> /usr/local/lib/xorg/modules/drivers/vesa_drv.so
>>>>> [    23.298] (II) Module vesa: vendor="X.Org Foundation"
>>>>> [    23.298]     compiled for 1.20.7, module version = 2.4.0
>>>>> [    23.298]     Module class: X.Org Video Driver
>>>>> [    23.298]     ABI class: X.Org Video Driver, version 24.1
>>>>> [    23.298] (II) VBoxVideo: guest driver for VirtualBox: vbox
>>>>> [    23.298] (II) modesetting: Driver for Modesetting Kernel  
>>>>> Drivers: kms
>>>>> [    23.298] (II) scfb: driver for wsdisplay framebuffer: scfb
>>>>> [    23.298] (II) VESA: driver for VESA chipsets: vesa
>>>>> [    23.298] (--) Using syscons driver with X support (version 2.0)
>>>>> [    23.298] (++) using VT number 9
>>>>> [    23.299] (II) vboxvideo: kernel driver found, not loading.
>>>>> [    23.311] (**) modeset(0): claimed PCI slot 0 at 0:2:0
>>>>> [    23.311] (II) modeset(0): using default device
>>>>> [    23.311] (WW) Falling back to old probe method for scfb
>>>>> [    23.311] scfb trace: probe start
>>>>> [    23.311] scfb trace: probe done
>>>>> [    23.311] (WW) VGA arbiter: cannot open kernel arbiter, no  
>>>>> multi-card
>>>>> support
>>>>> [    23.312] (II) modeset(0): Creating default Display subsection in
>>>>> Screen section
>>>>>   "Default Screen Section" for depth/fbbpp 24/32
>>>>> [    23.312] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
>>>>> [    23.312] (==) modeset(0): RGB weight 888
>>>>> [    23.312] (==) modeset(0): Default visual is TrueColor
>>>>> [    23.312] (II) Loading sub module "glamoregl"
>>>>> [    23.312] (II) LoadModule: "glamoregl"
>>>>> [    23.312] (II) Loading /usr/local/lib/xorg/modules/libglamoregl.so
>>>>> [    23.356] (II) Module glamoregl: vendor="X.Org Foundation"
>>>>> [    23.356]     compiled for 1.20.7, module version = 1.0.1
>>>>> [    23.356]     ABI class: X.Org ANSI C Emulation, version 0.4
>>>>> [    23.961] (II) modeset(0): Refusing to try glamor on llvmpipe
>>>>> [    23.970] (EE) modeset(0): glamor initialization failed
>>>>> [    23.970] (II) modeset(0): ShadowFB: preferred NO, enabled NO
>>>>> [    23.971] (II) modeset(0): Output VGA-1 has no monitor section
>>>>> [    23.972] (II) modeset(0): EDID for output VGA-1
>>>>> [    23.972] (II) modeset(0): Manufacturer: VBX  Model: 0 Serial#:
>>>>> 56624640
>>>>> [    23.972] (II) modeset(0): Year: 1990  Week: 1
>>>>> [    23.972] (II) modeset(0): EDID Version: 1.3
>>>>> [    23.972] (II) modeset(0): Digital Display Input
>>>>> [    23.972] (II) modeset(0): Indeterminate output size
>>>>> [    23.972] (II) modeset(0): Gamma: 2.20
>>>>> [    23.972] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
>>>>> [    23.972] (II) modeset(0): Supported color encodings: RGB 4:4:4  
>>>>> YCrCb
>>>>> 4:4:4
>>>>> [    23.972] (II) modeset(0): Default color space is primary color  
>>>>> space
>>>>> [    23.972] (II) modeset(0): First detailed timing is preferred mode
>>>>> [    23.972] (II) modeset(0): redX: 0.640 redY: 0.330   greenX: 0.300
>>>>> greenY: 0.600
>>>>> [    23.972] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312
>>>>> whiteY: 0.329
>>>>> [    23.972] (II) modeset(0): Manufacturer's mask: 0
>>>>> [    23.972] (II) modeset(0): Supported detailed timing:
>>>>> [    23.972] (II) modeset(0): clock: 80.5 MHz   Image Size:  0 x 0 mm
>>>>> [    23.972] (II) modeset(0): h_active: 1536  h_sync: 1538 h_sync_end
>>>>> 1540 h_blank_end 1542 h_border: 0
>>>>> [    23.972] (II) modeset(0): v_active: 864  v_sync: 864 v_sync_end  
>>>>> 898
>>>>> v_blanking: 870 v_border: 0
>>>>> [    23.972] (II) modeset(0): Ranges: V min: 0 V max: 200 Hz, H min:  
>>>>> 0 H
>>>>> max: 200 kHz, PixClock max 1005 MHz
>>>>> [    23.972] (II) modeset(0): Monitor name: VBOX monitor
>>>>> [    23.972] (II) modeset(0): EDID (in hex):
>>>>> [    23.972] (II) modeset(0): 00ffffffffffff005858000000066003
>>>>> [    23.972] (II) modeset(0): 0100010380000078eeee91a3544c9926
>>>>> [    23.972] (II) modeset(0): 0f505400000001010101010101010101
>>>>> [    23.973] (II) modeset(0): 010101010101711f0006606006300202
>>>>> [    23.973] (II) modeset(0): 0202000000000000000000fd0000c800
>>>>> [    23.973] (II) modeset(0): c864000a202020202020000000fc0056
>>>>> [    23.973] (II) modeset(0): 424f58206d6f6e69746f720a00000010
>>>>> [    23.973] (II) modeset(0): 000a2020202020202020202020200068
>>>>> [    23.973] (II) modeset(0): Printing probed modes for output VGA-1
>>>>> [    23.973] (II) modeset(0): Modeline "1536x864"x60.0  109.31 1536  
>>>>> 1624
>>>>> 1784 2032  864 867 872 897 -hsync +vsync (53.8 kHz P)
>>>>> [    23.973] (II) modeset(0): Modeline "2560x1600"x60.0  348.50 2560  
>>>>> 2752
>>>>> 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "2560x1600"x60.0  268.50 2560  
>>>>> 2608
>>>>> 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.7 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1920x1440"x60.0  234.00 1920  
>>>>> 2048
>>>>> 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1856x1392"x60.0  218.25 1856  
>>>>> 1952
>>>>> 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1792x1344"x60.0  204.75 1792  
>>>>> 1920
>>>>> 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "2048x1152"x60.0  162.00 2048  
>>>>> 2074
>>>>> 2154 2250  1152 1153 1156 1200 +hsync +vsync (72.0 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1920x1200"x59.9  193.25 1920  
>>>>> 2056
>>>>> 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1920x1200"x60.0  154.00 1920  
>>>>> 1968
>>>>> 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1920x1080"x60.0  148.50 1920  
>>>>> 2008
>>>>> 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1600x1200"x60.0  162.00 1600  
>>>>> 1664
>>>>> 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1680x1050"x60.0  146.25 1680  
>>>>> 1784
>>>>> 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1680x1050"x59.9  119.00 1680  
>>>>> 1728
>>>>> 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1400x1050"x60.0  121.75 1400  
>>>>> 1488
>>>>> 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1400x1050"x59.9  101.00 1400  
>>>>> 1448
>>>>> 1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1600x900"x60.0  108.00 1600  
>>>>> 1624
>>>>> 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1280x1024"x60.0  108.00 1280  
>>>>> 1328
>>>>> 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1440x900"x59.9  106.50 1440  
>>>>> 1520
>>>>> 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1440x900"x59.9   88.75 1440  
>>>>> 1488
>>>>> 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1280x960"x60.0  108.00 1280  
>>>>> 1376
>>>>> 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1366x768"x59.8   85.50 1366  
>>>>> 1436
>>>>> 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
>>>>> [    23.973] (II) modeset(0): Modeline "1366x768"x60.0   72.00 1366  
>>>>> 1380
>>>>> 1436 1500  768 769 772 800 +hsync +vsync (48.0 kHz e)
>>>>> [    23.974] (II) modeset(0): Modeline "1360x768"x60.0   85.50 1360  
>>>>> 1424
>>>>> 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
>>>>> [    23.974] (II) modeset(0): Modeline "1280x800"x59.8   83.50 1280  
>>>>> 1352
>>>>> 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
>>>>> [    23.974] (II) modeset(0): Modeline "1280x800"x59.9   71.00 1280  
>>>>> 1328
>>>>> 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
>>>>> [    23.974] (II) modeset(0): Modeline "1280x768"x59.9   79.50 1280  
>>>>> 1344
>>>>> 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
>>>>> [    23.974] (II) modeset(0): Modeline "1280x768"x60.0   68.25 1280  
>>>>> 1328
>>>>> 1360 1440  768 771 778 790 +hsync -vsync (47.4 kHz e)
>>>>> [    23.974] (II) modeset(0): Modeline "1280x720"x60.0   74.25 1280  
>>>>> 1390
>>>>> 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
>>>>> [    23.974] (II) modeset(0): Modeline "1024x768"x60.0   65.00 1024  
>>>>> 1048
>>>>> 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
>>>>> [    23.974] (II) modeset(0): Modeline "800x600"x60.3   40.00 800  
>>>>> 840 968
>>>>> 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
>>>>> [    23.974] (II) modeset(0): Modeline "800x600"x56.2   36.00 800  
>>>>> 824 896
>>>>> 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
>>>>> [    23.974] (II) modeset(0): Modeline "848x480"x60.0   33.75 848  
>>>>> 864 976
>>>>> 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
>>>>> [    23.974] (II) modeset(0): Modeline "640x480"x59.9   25.18 640  
>>>>> 656 752
>>>>> 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
>>>>> [    23.974] (II) modeset(0): Output VGA-1 connected
>>>>> [    23.974] (II) modeset(0): Using exact sizes for initial modes
>>>>> [    23.974] (II) modeset(0): Output VGA-1 using initial mode  
>>>>> 1536x864 +0+0
>>>>> [    23.974] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
>>>>> [    23.974] (==) modeset(0): DPI set to (96, 96)
>>>>> [    23.974] (II) Loading sub module "fb"
>>>>> [    23.974] (II) LoadModule: "fb"
>>>>> [    23.974] (II) Loading /usr/local/lib/xorg/modules/libfb.so
>>>>> [    23.975] (II) Module fb: vendor="X.Org Foundation"
>>>>> [    23.975]     compiled for 1.20.7, module version = 1.0.0
>>>>> [    23.975]     ABI class: X.Org ANSI C Emulation, version 0.4
>>>>> [    23.975] (II) UnloadModule: "scfb"
>>>>> [    23.975] (II) Unloading scfb
>>>>> [    23.975] (II) UnloadModule: "vesa"
>>>>> [    23.976] (II) Unloading vesa
>>>>> [    23.978] (==) modeset(0): Backing store enabled
>>>>> [    23.978] (==) modeset(0): Silken mouse enabled
>>>>> [    23.979] (II) modeset(0): Initializing kms color map for depth  
>>>>> 24, 8
>>>>> bpc.
>>>>> [    23.979] (==) modeset(0): DPMS enabled
>>>>> [    23.979] (II) Initializing extension Generic Event Extension
>>>>> [    23.980] (II) Initializing extension SHAPE
>>>>> [    23.980] (II) Initializing extension MIT-SHM
>>>>> [    23.981] (II) Initializing extension XInputExtension
>>>>> [    23.982] (II) Initializing extension XTEST
>>>>> [    23.983] (II) Initializing extension BIG-REQUESTS
>>>>> [    23.984] (II) Initializing extension SYNC
>>>>> [    23.984] (II) Initializing extension XKEYBOARD
>>>>> [    23.985] (II) Initializing extension XC-MISC
>>>>> [    23.985] (II) Initializing extension SECURITY
>>>>> [    23.986] (II) Initializing extension XFIXES
>>>>> [    23.987] (II) Initializing extension RENDER
>>>>> [    23.987] (II) Initializing extension RANDR
>>>>> [    23.988] (II) Initializing extension COMPOSITE
>>>>> [    23.989] (II) Initializing extension DAMAGE
>>>>> [    23.989] (II) Initializing extension MIT-SCREEN-SAVER
>>>>> [    23.990] (II) Initializing extension DOUBLE-BUFFER
>>>>> [    23.990] (II) Initializing extension RECORD
>>>>> [    23.991] (II) Initializing extension DPMS
>>>>> [    23.991] (II) Initializing extension Present
>>>>> [    23.992] (II) Initializing extension DRI3
>>>>> [    23.992] (II) Initializing extension X-Resource
>>>>> [    23.992] (II) Initializing extension XVideo
>>>>> [    23.993] (II) Initializing extension XVideo-MotionCompensation
>>>>> [    23.993] (II) Initializing extension GLX
>>>>> [    23.993] (II) AIGLX: Screen 0 is not DRI2 capable
>>>>> [    24.058] (II) IGLX: Loaded and initialized swrast
>>>>> [    24.058] (II) GLX: Initialized DRISWRAST GL provider for screen 0
>>>>> [    24.058] (II) Initializing extension XFree86-VidModeExtension
>>>>> [    24.059] (II) Initializing extension XFree86-DGA
>>>>> [    24.059] (II) Initializing extension XFree86-DRI
>>>>> [    24.059] (II) Initializing extension DRI2
>>>>> [    24.060] (II) modeset(0): Damage tracking initialized
>>>>> [    24.060] (II) modeset(0): Setting screen physical size to 406 x  
>>>>> 228
>>>>> [    24.263] (II) config/udev: Adding input device System mouse
>>>>> (/dev/input/event0)
>>>>> [    24.263] (**) System mouse: Applying InputClass "libinput pointer
>>>>> catchall"
>>>>> [    24.263] (II) LoadModule: "libinput"
>>>>> [    24.264] (II) Loading  
>>>>> /usr/local/lib/xorg/modules/input/libinput_drv.so
>>>>> [    24.304] (II) Module libinput: vendor="X.Org Foundation"
>>>>> [    24.304]     compiled for 1.20.7, module version = 0.28.2
>>>>> [    24.304]     Module class: X.Org XInput Driver
>>>>> [    24.304]     ABI class: X.Org XInput driver, version 24.1
>>>>> [    24.304] (II) Using input driver 'libinput' for 'System mouse'
>>>>> [    24.304] (**) System mouse: always reports core events
>>>>> [    24.304] (**) Option "Device" "/dev/input/event0"
>>>>> [    24.304] (**) Option "_source" "server/udev"
>>>>> [    24.328] (II) event0  - System mouse: is tagged by udev as: Mouse
>>>>> [    24.328] (II) event0  - System mouse: device is a pointer
>>>>> [    24.329] (II) event0  - System mouse: device removed
>>>>> [    24.329] (**) Option "config_info" "udev:/dev/input/event0"
>>>>> [    24.329] (II) XINPUT: Adding extended input device "System mouse"
>>>>> (type: MOUSE, id 6)
>>>>> [    24.329] (**) Option "AccelerationScheme" "none"
>>>>> [    24.329] (**) System mouse: (accel) selected scheme none/0
>>>>> [    24.329] (**) System mouse: (accel) acceleration factor: 2.000
>>>>> [    24.329] (**) System mouse: (accel) acceleration threshold: 4
>>>>> [    24.331] (II) event0  - System mouse: is tagged by udev as: Mouse
>>>>> [    24.331] (II) event0  - System mouse: device is a pointer
>>>>> [    24.332] (II) config/udev: Adding input device System keyboard
>>>>> multiplexer (/dev/input/event1)
>>>>> [    24.332] (**) System keyboard multiplexer: Applying InputClass  
>>>>> "Evdev
>>>>> keyboard"
>>>>> [    24.332] (**) System keyboard multiplexer: Applying InputClass
>>>>> "libinput keyboard catchall"
>>>>> [    24.332] (II) Using input driver 'libinput' for 'System keyboard
>>>>> multiplexer'
>>>>> [    24.332] (**) System keyboard multiplexer: always reports core  
>>>>> events
>>>>> [    24.332] (**) Option "Device" "/dev/input/event1"
>>>>> [    24.332] (**) Option "_source" "server/udev"
>>>>> [    24.335] (II) event1  - System keyboard multiplexer: is tagged  
>>>>> by udev
>>>>> as: Keyboard
>>>>> [    24.335] (II) event1  - System keyboard multiplexer: device is a
>>>>> keyboard
>>>>> [    24.336] (II) event1  - System keyboard multiplexer: device  
>>>>> removed
>>>>> [    24.336] (**) Option "config_info" "udev:/dev/input/event1"
>>>>> [    24.336] (II) XINPUT: Adding extended input device "System  
>>>>> keyboard
>>>>> multiplexer" (type: KEYBOARD, id 7)
>>>>> [    24.336] (**) Option "xkb_rules" "evdev"
>>>>> [    24.419] (II) event1  - System keyboard multiplexer: is tagged  
>>>>> by udev
>>>>> as: Keyboard
>>>>> [    24.419] (II) event1  - System keyboard multiplexer: device is a
>>>>> keyboard
>>>>> [    24.420] (II) config/udev: Adding input device AT keyboard
>>>>> (/dev/input/event2)
>>>>> [    24.420] (**) AT keyboard: Applying InputClass "Evdev keyboard"
>>>>> [    24.420] (**) AT keyboard: Applying InputClass "libinput keyboard
>>>>> catchall"
>>>>> [    24.420] (II) Using input driver 'libinput' for 'AT keyboard'
>>>>> [    24.420] (**) AT keyboard: always reports core events
>>>>> [    24.420] (**) Option "Device" "/dev/input/event2"
>>>>> [    24.420] (**) Option "_source" "server/udev"
>>>>> [    24.421] (II) event2  - AT keyboard: is tagged by udev as:  
>>>>> Keyboard
>>>>> [    24.422] (II) event2  - AT keyboard: device is a keyboard
>>>>> [    24.422] (II) event2  - AT keyboard: device removed
>>>>> [    24.422] (**) Option "config_info" "udev:/dev/input/event2"
>>>>> [    24.422] (II) XINPUT: Adding extended input device "AT keyboard"
>>>>> (type: KEYBOARD, id 8)
>>>>> [    24.422] (**) Option "xkb_rules" "evdev"
>>>>> [    24.424] (II) event2  - AT keyboard: is tagged by udev as:  
>>>>> Keyboard
>>>>> [    24.424] (II) event2  - AT keyboard: device is a keyboard
>>>>> [    24.425] (II) config/udev: Adding input device IntelliMouse  
>>>>> Explorer
>>>>> (/dev/input/event3)
>>>>> [    24.425] (**) IntelliMouse Explorer: Applying InputClass  
>>>>> "libinput
>>>>> pointer catchall"
>>>>> [    24.425] (II) Using input driver 'libinput' for 'IntelliMouse  
>>>>> Explorer'
>>>>> [    24.426] (**) IntelliMouse Explorer: always reports core events
>>>>> [    24.426] (**) Option "Device" "/dev/input/event3"
>>>>> [    24.426] (**) Option "_source" "server/udev"
>>>>> [    24.434] (II) event3  - IntelliMouse Explorer: is tagged by udev  
>>>>> as:
>>>>> Mouse
>>>>> [    24.435] (II) event3  - IntelliMouse Explorer: device is a  
>>>>> pointer
>>>>> [    24.436] (II) event3  - IntelliMouse Explorer: device removed
>>>>> [    24.462] (**) Option "config_info" "udev:/dev/input/event3"
>>>>> [    24.462] (II) XINPUT: Adding extended input device "IntelliMouse
>>>>> Explorer" (type: MOUSE, id 9)
>>>>> [    24.462] (**) Option "AccelerationScheme" "none"
>>>>> [    24.462] (**) IntelliMouse Explorer: (accel) selected scheme  
>>>>> none/0
>>>>> [    24.462] (**) IntelliMouse Explorer: (accel) acceleration  
>>>>> factor: 2.000
>>>>> [    24.462] (**) IntelliMouse Explorer: (accel) acceleration  
>>>>> threshold: 4
>>>>> [    24.471] (II) event3  - IntelliMouse Explorer: is tagged by udev  
>>>>> as:
>>>>> Mouse
>>>>> [    24.471] (II) event3  - IntelliMouse Explorer: device is a  
>>>>> pointer
>>>>> [    24.472] (II) config/udev: Adding input device VirtualBox USB
>>>>> Multi-Touch (/dev/input/event4)
>>>>> [    24.472] (**) VirtualBox USB Multi-Touch: Applying InputClass
>>>>> "libinput touchscreen catchall"
>>>>> [    24.472] (II) Using input driver 'libinput' for 'VirtualBox USB
>>>>> Multi-Touch'
>>>>> [    24.472] (**) VirtualBox USB Multi-Touch: always reports core  
>>>>> events
>>>>> [    24.472] (**) Option "Device" "/dev/input/event4"
>>>>> [    24.472] (**) Option "_source" "server/udev"
>>>>> [    24.475] (II) event4  - VirtualBox USB Multi-Touch, class 0/0,  
>>>>> rev
>>>>> 1.10/1.00, addr 2: is tagged by udev as: Touchscreen
>>>>> [    24.476] (II) event4  - VirtualBox USB Multi-Touch, class 0/0,  
>>>>> rev
>>>>> 1.10/1.00, addr 2: device is a touch device
>>>>> [    24.477] (II) event4  - VirtualBox USB Multi-Touch, class 0/0,  
>>>>> rev
>>>>> 1.10/1.00, addr 2: device removed
>>>>> [    24.477] (**) Option "config_info" "udev:/dev/input/event4"
>>>>> [    24.477] (II) XINPUT: Adding extended input device "VirtualBox  
>>>>> USB
>>>>> Multi-Touch" (type: TOUCHSCREEN, id 10)
>>>>> [    24.478] (**) Option "AccelerationScheme" "none"
>>>>> [    24.478] (**) VirtualBox USB Multi-Touch: (accel) selected scheme
>>>>> none/0
>>>>> [    24.478] (**) VirtualBox USB Multi-Touch: (accel) acceleration  
>>>>> factor:
>>>>> 2.000
>>>>> [    24.478] (**) VirtualBox USB Multi-Touch: (accel) acceleration
>>>>> threshold: 4
>>>>> [    24.480] (II) event4  - VirtualBox USB Multi-Touch, class 0/0,  
>>>>> rev
>>>>> 1.10/1.00, addr 2: is tagged by udev as: Touchscreen
>>>>> [    24.482] (II) event4  - VirtualBox USB Multi-Touch, class 0/0,  
>>>>> rev
>>>>> 1.10/1.00, addr 2: device is a touch device
>>>>> [    29.559] (II) modeset(0): EDID vendor "VBX", prod id 0
>>>>> [    29.559] (II) modeset(0): DDCModeFromDetailedTiming: 1536x864  
>>>>> Warning:
>>>>> We only handle separate sync.
>>>>> [    29.559] (II) modeset(0): Using EDID range info for horizontal  
>>>>> sync
>>>>> [    29.559] (II) modeset(0): Using EDID range info for vertical  
>>>>> refresh
>>>>> [  8249.704] (II) config/udev: removing device VirtualBox USB  
>>>>> Multi-Touch
>>>>> [  8249.705] (II) event4  - VirtualBox USB Multi-Touch, class 0/0,  
>>>>> rev
>>>>> 1.10/1.00, addr 2: device removed
>>>>> [  8249.705] (II) UnloadModule: "libinput"
>>>>> [  8250.406] (II) config/udev: Adding input device VirtualBox USB
>>>>> Multi-Touch (/dev/input/event4)
>>>>> [  8250.406] (**) VirtualBox USB Multi-Touch: Applying InputClass
>>>>> "libinput touchscreen catchall"
>>>>> [  8250.406] (II) Using input driver 'libinput' for 'VirtualBox USB
>>>>> Multi-Touch'
>>>>> [  8250.406] (**) VirtualBox USB Multi-Touch: always reports core  
>>>>> events
>>>>> [  8250.406] (**) Option "Device" "/dev/input/event4"
>>>>> [  8250.407] (**) Option "_source" "server/udev"
>>>>> [  8250.410] (II) event4  - VirtualBox USB Multi-Touch, class 0/0,  
>>>>> rev
>>>>> 1.10/1.00, addr 2: is tagged by udev as: Touchscreen
>>>>> [  8250.411] (II) event4  - VirtualBox USB Multi-Touch, class 0/0,  
>>>>> rev
>>>>> 1.10/1.00, addr 2: device is a touch device
>>>>> [  8250.412] (II) event4  - VirtualBox USB Multi-Touch, class 0/0,  
>>>>> rev
>>>>> 1.10/1.00, addr 2: device removed
>>>>> [  8250.412] (**) Option "config_info" "udev:/dev/input/event4"
>>>>> [  8250.412] (II) XINPUT: Adding extended input device "VirtualBox  
>>>>> USB
>>>>> Multi-Touch" (type: TOUCHSCREEN, id 10)
>>>>> [  8250.417] (**) Option "AccelerationScheme" "none"
>>>>> [  8250.417] (**) VirtualBox USB Multi-Touch: (accel) selected scheme
>>>>> none/0
>>>>> [  8250.417] (**) VirtualBox USB Multi-Touch: (accel) acceleration  
>>>>> factor:
>>>>> 2.000
>>>>> [  8250.417] (**) VirtualBox USB Multi-Touch: (accel) acceleration
>>>>> threshold: 4
>>>>> [  8250.420] (II) event4  - VirtualBox USB Multi-Touch, class 0/0,  
>>>>> rev
>>>>> 1.10/1.00, addr 2: is tagged by udev as: Touchscreen
>>>>> [  8250.422] (II) event4  - VirtualBox USB Multi-Touch, class 0/0,  
>>>>> rev
>>>>> 1.10/1.00, addr 2: device is a touch device
>>>>> _______________________________________________
>>>>> freebsd-ports at freebsd.org mailing list
>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-ports
>>>>> To unsubscribe, send any mail to  
>>>>> "freebsd-ports-unsubscribe at freebsd.org"
>>>> _______________________________________________
>>>> freebsd-ports at freebsd.org mailing list
>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-ports
>>>> To unsubscribe, send any mail to  
>>>> "freebsd-ports-unsubscribe at freebsd.org"
>>> _______________________________________________
>>> freebsd-ports at freebsd.org mailing list
>>> https://lists.freebsd.org/mailman/listinfo/freebsd-ports
>>> To unsubscribe, send any mail to  
>>> "freebsd-ports-unsubscribe at freebsd.org"
>> _______________________________________________
>> freebsd-ports at freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-ports
>> To unsubscribe, send any mail to "freebsd-ports-unsubscribe at freebsd.org"
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: libinput.list-devices.txt
URL: <http://lists.freebsd.org/pipermail/freebsd-ports/attachments/20200307/c72bba7d/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: xinput.list-props.11.txt
URL: <http://lists.freebsd.org/pipermail/freebsd-ports/attachments/20200307/c72bba7d/attachment-0001.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: xinput.list.txt
URL: <http://lists.freebsd.org/pipermail/freebsd-ports/attachments/20200307/c72bba7d/attachment-0002.txt>

More information about the freebsd-ports mailing list