Failed upgrade graphics/ImageMagick: /usr/bin/ld: skipping incompatible /usr/lib32/...

Thu Dec 24 00:21:46 UTC 2015

On Wed, Dec 23, 2015 at 5:14 AM, David Wolfskill <david at catwhisker.org>
wrote:

> Today's daily stable/10 laptop update was from:
>
> FreeBSD g1-252.catwhisker.org 10.2-STABLE FreeBSD 10.2-STABLE #235
> r292590M/292594:1002504: Tue Dec 22 04:31:23 PST 2015
>  root at g1-252.catwhisker.org:/common/S1/obj/usr/src/sys/CANARY  amd64
>
> to:
>
> FreeBSD g1-252.catwhisker.org 10.2-STABLE FreeBSD 10.2-STABLE #236
> r292656M/292657:1002504: Wed Dec 23 04:20:06 PST 2015
>  root at g1-252.catwhisker.org:/common/S1/obj/usr/src/sys/CANARY  amd64
>
>
> After a successful reboot, I then (as is my custom) invoked portmaster
> to update the installed ports on it; the following were selected:
>
> ===>>> The following actions will be taken if you choose to proceed:
>         Upgrade rpm2cpio-1.4 to rpm2cpio-1.4_1
>         Upgrade ImageMagick-6.9.2.8_1,1 to ImageMagick-6.9.2.10,1
>         Upgrade librsvg2-2.40.10 to librsvg2-2.40.12
>         Upgrade libXi-1.7.5,1 to libXi-1.7.6,1
>         Upgrade openjdk8-8.66.17 to openjdk8-8.66.17_1
>
>
> /usr/ports had been updated to 404287 (on ports/head).
>
> During the initial pass, the ImageMagick update failed; I proceeded
> with the remianing 3 (which succeeeded), then re-tried ImageMagick,
> which failed again in the same way:
>
> ...
> ===>  Building for ImageMagick-6.9.2.10,1
> gmake[2]: Entering directory
> '/common/ports/graphics/ImageMagick/work/ImageMagick-6.9.2-10'
> gmake  all-am
> gmake[3]: Entering directory
> '/common/ports/graphics/ImageMagick/work/ImageMagick-6.9.2-10'
> cp -f magick/ImageMagick.pc magick/ImageMagick-6.pc
> cp -f magick/MagickCore.pc magick/MagickCore-6.pc
> cp -f wand/MagickWand.pc wand/MagickWand-6.pc
> cp -f wand/Wand.pc wand/Wand-6.pc
> cp -f Magick++/lib/Magick++.pc Magick++/lib/Magick++-6.pc
> cp -f Magick++/lib/ImageMagick++.pc Magick++/lib/ImageMagick++-6.pc
>   GEN      PerlMagick/quantum/Q16HDRI.xs
>   GEN      PerlMagick/quantum/Q16HDRI.pm
>   CC       coders/coders_aai_la-aai.lo
>   CC       magick/magick_libMagickCore_6_la-animate.lo
> ...
>   CC       utilities/montage.o
>   CC       utilities/stream.o
>   CCLD     magick/libMagickCore-6.la
> /usr/bin/ld: skipping incompatible /usr/lib32/liblzma.so when searching
> for -llzma
> /usr/bin/ld: skipping incompatible /usr/lib32/liblzma.a when searching for
> -llzma
> /usr/bin/ld: skipping incompatible /usr/lib32/libbz2.so when searching for
> -lbz2
> /usr/bin/ld: skipping incompatible /usr/lib32/libbz2.a when searching for
> -lbz2
> /usr/bin/ld: skipping incompatible /usr/lib32/libz.so when searching for
> -lz
> /usr/bin/ld: skipping incompatible /usr/lib32/libz.a when searching for -lz
> /usr/bin/ld: skipping incompatible /usr/lib32/libm.so when searching for
> -lm
> /usr/bin/ld: skipping incompatible /usr/lib32/libm.a when searching for -lm
> /usr/bin/ld: skipping incompatible /usr/lib32/libpthread.so when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib32/libpthread.a when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib32/libgcc.a when searching for
> -lgcc
> /usr/bin/ld: skipping incompatible /usr/lib32/libgcc_s.so when searching
> for -lgcc_s
> /usr/bin/ld: skipping incompatible /usr/lib32/libpthread.so when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib32/libpthread.a when searching
> for -lpthread
> /usr/bin/ld: skipping incompatible /usr/lib32/libc.so.7 when searching for
> /usr/lib32/libc.so.7
> /usr/bin/ld: cannot find /usr/lib32/libc.so.7
> cc: error: linker command failed with exit code 1 (use -v to see
> invocation)
> Makefile:6617: recipe for target 'magick/libMagickCore-6.la' failed
> gmake[3]: *** [magick/libMagickCore-6.la] Error 1
> gmake[3]: *** Waiting for unfinished jobs....
> gmake[3]: Leaving directory
> '/common/ports/graphics/ImageMagick/work/ImageMagick-6.9.2-10'
> Makefile:5194: recipe for target 'all' failed
> gmake[2]: *** [all] Error 2
> gmake[2]: Leaving directory
> '/common/ports/graphics/ImageMagick/work/ImageMagick-6.9.2-10'
> ===> Compilation failed unexpectedly.
> Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to
> the maintainer.
> *** Error code 1
>
> Stop.
> make[1]: stopped in /common/ports/graphics/ImageMagick
> *** Error code 1
>
> Stop.
> make: stopped in /common/ports/graphics/ImageMagick
>
> ===>>> make build failed for graphics/ImageMagick
> ===>>> Aborting update
>
> ===>>> You can restart from the point of failure with this command line:
>        portmaster <flags> graphics/ImageMagick
>
> Script done on Wed Dec 23 04:40:36 2015
>
>
> As I am not attempting to cross-build -- this is a native amd64
> environment; no jails; no virtualization -- and building "for local
> consumption," I'm not at all clear why the port was looking at
> 32-bit libraries in the first place ... but I freely admit that I've
> never had occasion to examine that in detail before, so don't take
> that as anything more than an admission of ignorance.
>
> The change to the port itself appears to be quite minor:
>
> g1-252(11.0-C)[12] dirs
> /usr/ports/graphics/ImageMagick
> g1-252(11.0-C)[13] svn log Makefile |head -3
> ------------------------------------------------------------------------
> r404265 | kwm | 2015-12-22 12:04:50 -0800 (Tue, 22 Dec 2015) | 2 lines
>
> g1-252(11.0-C)[14] svn diff -c r404265
> Index: Makefile
> ===================================================================
> --- Makefile    (revision 404264)
> +++ Makefile    (revision 404265)
> @@ -1,8 +1,7 @@
>  # $FreeBSD$
>
>  PORTNAME=      ImageMagick
> -DISTVERSION=   6.9.2-8
> -PORTREVISION=  1
> +DISTVERSION=   6.9.2-10
>  PORTEPOCH=     1
>  CATEGORIES=    graphics perl5
>  MASTER_SITES=  http://www.imagemagick.org/download/ \
> Index: distinfo
> ===================================================================
> --- distinfo    (revision 404264)
> +++ distinfo    (revision 404265)
> @@ -1,2 +1,2 @@
> -SHA256 (ImageMagick-6.9.2-8.tar.xz) =
> f2c6de7b73b7c207911909d7ca26b18fb4f40c1ea654a251e7ed4c886b6ad92d
> -SIZE (ImageMagick-6.9.2-8.tar.xz) = 8844076
> +SHA256 (ImageMagick-6.9.2-10.tar.xz) =
> da2f6fba43d69f20ddb11783f13f77782b0b57783dde9cda39c9e5e733c2013c
> +SIZE (ImageMagick-6.9.2-10.tar.xz) = 8755528
> g1-252(11.0-C)[15]
>
>
> so I'm pretty much at a loss to understand what happened.
>
> Any clues?
>
> Thanks!
>
> Peace,
> david
> --
> David H. Wolfskill                              david at catwhisker.org
> Those who would murder in the name of God or prophet are blasphemous
> cowards.
>
> See http://www.catwhisker.org/~david/publickey.gpg for my public key.
>

The latest update to ImageMagick built with no problems on my amd64
10.2-STABLE system. My system is two weeks old (r291863), so it looks like
something broke something between then and now. I really can't see why it
would be linking to stuff in lib32.
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkoberman at gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683