Fwd: ja-skk-tools-1.3.2,1 failed on i386 8
Martin Wilke
miwi at freebsd.org
Wed Mar 27 01:20:23 UTC 2013
anyone :)?
Begin forwarded message:
> From: Portbuild user <portbuild at FreeBSD.org>
> Subject: ja-skk-tools-1.3.2,1 failed on i386 8
> Date: March 27, 2013 9:18:05 AM GMT+08:00
> To: miwi at freebsd.org
>
> You can also find this build log at
>
> http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/a.8.20130327001001.pointyhat/ja-skk-tools-1.3.2,1.log
>
> building ja-skk-tools-1.3.2,1 on gohan12.freebsd.org
> in directory /a/pkgbuild/8/20130327001001.pointyhat/chroot/66641
> building for: 8.3-RELEASE-p6 i386
> maintained by: ports at FreeBSD.org
> port directory: /usr/ports/japanese/skk-tools
> Makefile ident: $FreeBSD: head/japanese/skk-tools/Makefile 305610 2012-10-09 22:12:13Z linimon $
> build started at Wed Mar 27 01:15:47 UTC 2013
> FETCH_DEPENDS=
> PATCH_DEPENDS=
> EXTRACT_DEPENDS=
> BUILD_DEPENDS=gettext-0.18.1.1_1.tbz glib-2.34.3.tbz libffi-3.0.13.tbz libiconv-1.14_1.tbz pcre-8.32.tbz perl-5.14.2_3.tbz python27-2.7.3_6.tbz
> RUN_DEPENDS=gamin-0.1.10_5.tbz gettext-0.18.1.1_1.tbz gio-fam-backend-2.34.3.tbz glib-2.34.3.tbz libffi-3.0.13.tbz libiconv-1.14_1.tbz pcre-8.32.tbz perl-5.14.2_3.tbz python27-2.7.3_6.tbz
> PKG_DEPENDS=
> prefixes: LOCALBASE=usr/local
> add_pkg
> add_pkg
> ================================================================
> ====================<phase 1: make checksum>====================
> ===> License GPLv2 accepted by the user
> => skktools-1.3.2.tar.gz doesn't seem to exist in /tmp/distfiles/.
> => Attempting to fetch ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles//skktools-1.3.2.tar.gz
> skktools-1.3.2.tar.gz 267 kB 55 MBps
> ===> Fetching all distfiles required by ja-skk-tools-1.3.2,1 for building
> => SHA256 Checksum OK for skktools-1.3.2.tar.gz.
> ================================================================
> ====================<phase 2: make extract>====================
> add_pkg
> ===> License GPLv2 accepted by the user
> ===> Fetching all distfiles required by ja-skk-tools-1.3.2,1 for building
> ===> Extracting for ja-skk-tools-1.3.2,1
> ===> License GPLv2 accepted by the user
> ===> Fetching all distfiles required by ja-skk-tools-1.3.2,1 for building
> => SHA256 Checksum OK for skktools-1.3.2.tar.gz.
> ================================================================
> ====================<phase 3: make patch>====================
> add_pkg
> ===> Patching for ja-skk-tools-1.3.2,1
> ================================================================
> ====================<phase 4: make build>====================
> add_pkg gettext-0.18.1.1_1.tbz glib-2.34.3.tbz libffi-3.0.13.tbz libiconv-1.14_1.tbz pcre-8.32.tbz perl-5.14.2_3.tbz python27-2.7.3_6.tbz
> adding dependencies
> adding package gettext-0.18.1.1_1.tbz
> adding package glib-2.34.3.tbz
> Removing stale symlinks from /usr/bin...
> Skipping /usr/bin/perl
> Skipping /usr/bin/perl5
> Done.
> Creating various symlinks in /usr/bin...
> Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl
> Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl5
> Done.
> Cleaning up /etc/make.conf... Done.
> Spamming /etc/make.conf... Done.
> Cleaning up /etc/manpath.config... Done.
> Spamming /etc/manpath.config... Done.
>
> ====
> Note that some of the standard modules are provided as separate
> ports since they require extra dependencies:
>
> bsddb databases/py-bsddb
> gdbm databases/py-gdbm
> sqlite3 databases/py-sqlite3
> tkinter x11-toolkits/py-tkinter
>
> Install them as needed.
> ====
>
> No schema files found: doing nothing.
> adding package libffi-3.0.13.tbz
> skipping libffi-3.0.13, already added
> adding package libiconv-1.14_1.tbz
> skipping libiconv-1.14_1, already added
> adding package pcre-8.32.tbz
> skipping pcre-8.32, already added
> adding package perl-5.14.2_3.tbz
> skipping perl-5.14.2_3, already added
> adding package python27-2.7.3_6.tbz
> skipping python27-2.7.3_6, already added
> ===> ja-skk-tools-1.3.2,1 depends on shared library: glib-2.0 - found
> ===> ja-skk-tools-1.3.2,1 depends on shared library: pcre - found
> ===> Configuring for ja-skk-tools-1.3.2,1
> checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... yes
> checking for a thread-safe mkdir -p... ./install-sh -c -d
> checking for gawk... no
> checking for mawk... no
> checking for nawk... nawk
> checking whether make sets $(MAKE)... yes
> checking for style of include used by make... GNU
> checking for gcc... gcc
> checking whether the C compiler works... yes
> checking for C compiler default output file name... a.out
> checking for suffix of executables...
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking dependency style of gcc... gcc3
> checking how to run the C preprocessor... cpp
> checking for grep that handles long lines and -e... /usr/bin/grep
> checking for egrep... /usr/bin/grep -E
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking minix/config.h usability... no
> checking minix/config.h presence... no
> checking for minix/config.h... no
> checking whether it is safe to define __EXTENSIONS__... yes
> checking for gawk... (cached) nawk
> checking for gcc... (cached) gcc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking for gcc option to accept ISO C89... (cached) none needed
> checking dependency style of gcc... (cached) gcc3
> checking build system type... i386-portbld-freebsd8.3
> checking host system type... i386-portbld-freebsd8.3
> checking how to print strings... print: not found
> printf
> checking for a sed that does not truncate output... /usr/bin/sed
> checking for fgrep... /usr/bin/grep -F
> checking for ld used by gcc... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
> checking the name lister (/usr/bin/nm -B) interface... BSD nm
> checking whether ln -s works... yes
> checking the maximum length of command line arguments... (cached) 262144
> checking whether the shell understands some XSI constructs... yes
> checking whether the shell understands "+="... no
> checking for /usr/bin/ld option to reload object files... -r
> checking for objdump... objdump
> checking how to recognize dependent libraries... pass_all
> checking for ar... ar
> checking for strip... strip
> checking for ranlib... ranlib
> checking command to parse /usr/bin/nm -B output from gcc object... ok
> checking for dlfcn.h... yes
> checking for objdir... .libs
> checking if gcc supports -fno-rtti -fno-exceptions... no
> checking for gcc option to produce PIC... -fPIC -DPIC
> checking if gcc PIC flag -fPIC -DPIC works... yes
> checking if gcc static flag -static works... yes
> checking if gcc supports -c -o file.o... yes
> checking if gcc supports -c -o file.o... (cached) yes
> checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
> checking whether -lc should be explicitly linked in... no
> checking dynamic linker characteristics... freebsd8.3 ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking whether make sets $(MAKE)... (cached) yes
> checking for bzip2... /usr/bin/bzip2
> checking for date... /bin/date
> checking for gzip... /usr/bin/gzip
> checking for md5... /sbin/md5
> checking for tar... /usr/bin/tar
> checking for mkdtemp... yes
> checking for snprintf... yes
> checking for dbm_open... yes
> checking for pkg-config... no
> *** The pkg-config script could not be found. Make sure it is
> *** in your path, or set the PKG_CONFIG environment variable
> *** to the full path to pkg-config.
> *** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config.
> checking fcntl.h usability... yes
> checking fcntl.h presence... yes
> checking for fcntl.h... yes
> checking glib.h usability... no
> checking glib.h presence... no
> checking for glib.h... no
> checking malloc.h usability... no
> checking malloc.h presence... no
> checking for malloc.h... no
> checking ndbm.h usability... yes
> checking ndbm.h presence... yes
> checking for ndbm.h... yes
> checking for an ANSI C-conforming const... yes
> checking for stdlib.h... (cached) yes
> checking for GNU libc compatible malloc... yes
> checking return type of signal handlers... void
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating config.h
> config.status: executing depfiles commands
> config.status: executing libtool commands
> ===> Building for ja-skk-tools-1.3.2,1
> gcc -I. -I. -I. -O2 -pipe -fno-strict-aliasing -o skkdic-expr ./skkdic-expr.c
> gcc -I. -I. -I. -O2 -pipe -fno-strict-aliasing -o skkdic-sort ./skkdic-sort.c
> gcc -I. -I. -I. -O2 -pipe -fno-strict-aliasing -o skkdic-count ./skkdic-count.c
> ================================================================
> ====================<phase 5: make test>====================
> make: don't know how to make regression-test(continuing)
> ================================================================
> ====================<phase 6: make install>====================
> add_pkg gamin-0.1.10_5.tbz gettext-0.18.1.1_1.tbz gio-fam-backend-2.34.3.tbz glib-2.34.3.tbz libffi-3.0.13.tbz libiconv-1.14_1.tbz pcre-8.32.tbz perl-5.14.2_3.tbz python27-2.7.3_6.tbz
> adding dependencies
> adding package gamin-0.1.10_5.tbz
>
> ===============================================================================
>
> Gamin will only provide realtime notification of changes for at most n files,
> where n is the minimum value between (kern.maxfiles * 0.7) and
> (kern.maxfilesperproc - 200). Beyond that limit, files will be polled.
>
> If you often open several large folders with Nautilus, you might want to
> increase the kern.maxfiles tunable (you do not need to set
> kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles).
>
> For a typical desktop, add the following line to /boot/loader.conf, then
> reboot the system:
>
> kern.maxfiles="25000"
>
> The behavior of gamin can be controlled via the various gaminrc files.
> See http://www.gnome.org/~veillard/gamin/config.html on how to create
> these files. In particular, if you find gam_server is taking up too much
> CPU time polling for changes, something like the following may help
> in one of the gaminrc files:
>
> # reduce polling frequency to once per 10 seconds
> # for UFS file systems in order to lower CPU load
> fsset ufs poll 10
>
> ===============================================================================
>
> adding package gettext-0.18.1.1_1.tbz
> skipping gettext-0.18.1.1_1, already added
> adding package gio-fam-backend-2.34.3.tbz
> adding package glib-2.34.3.tbz
> skipping glib-2.34.3, already added
> adding package libffi-3.0.13.tbz
> skipping libffi-3.0.13, already added
> adding package libiconv-1.14_1.tbz
> skipping libiconv-1.14_1, already added
> adding package pcre-8.32.tbz
> skipping pcre-8.32, already added
> adding package perl-5.14.2_3.tbz
> skipping perl-5.14.2_3, already added
> adding package python27-2.7.3_6.tbz
> skipping python27-2.7.3_6, already added
> ===> Installing for ja-skk-tools-1.3.2,1
> ===> ja-skk-tools-1.3.2,1 depends on file: /usr/local/lib/gio/modules/libgiofam.so - found
> ===> ja-skk-tools-1.3.2,1 depends on shared library: glib-2.0 - found
> ===> ja-skk-tools-1.3.2,1 depends on shared library: pcre - found
> ===> Generating temporary packing list
> ===> Checking if japanese/skk-tools already installed
> ./mkinstalldirs /usr/local/bin
> install -s -o root -g wheel -m 555 skkdic-expr /usr/local/bin/
> install -s -o root -g wheel -m 555 skkdic-sort /usr/local/bin/
> install -s -o root -g wheel -m 555 skkdic-count /usr/local/bin/
> install -o root -g wheel -m 444 /work/a/ports/japanese/skk-tools/work/skktools-1.3.2/READMEs/README.C /usr/local/share/doc/skk/README.skktools
> install -o root -g wheel -m 444 /work/a/ports/japanese/skk-tools/work/skktools-1.3.2/READMEs/README.skkdic-expr2 /usr/local/share/doc/skk
> ===> Registering installation for ja-skk-tools-1.3.2,1
> ================================================================
> ====================<phase 7: make package>====================
> ===> Building package for ja-skk-tools-1.3.2,1
> tar: bin/skkdic-expr2: Cannot stat: No such file or directory
> tar: Error exit delayed from previous errors.
> pkg_create: make_dist: tar command failed with code 256
> *** Error code 1
>
> Stop in /a/ports/japanese/skk-tools.
> *** Error code 1
>
> Stop in /a/ports/japanese/skk-tools.
> ================================================================
> build of /usr/ports/japanese/skk-tools ended at Wed Mar 27 01:18:04 UTC 2013
>
+-----------------oOO--(_)--OOo-------------------------+
With best Regards,
Martin Wilke (miwi_(at)_FreeBSD.org)
Mess with the Best, Die like the Rest
More information about the freebsd-ports
mailing list