optionsng ignores /var/db/ports/<portname>/options
Baptiste Daroussin
bapt at FreeBSD.org
Sun Jun 3 20:01:05 UTC 2012
On Sun, Jun 03, 2012 at 09:20:23PM +0200, Roland Smith wrote:
> [Please cc me, since I'm not subscribed to this list. I originally asked this
> on questions at .]
>
> Hi,
>
> With the release of the new options framework for ports, I've run into a
> problem trying to convert one of my ports.
>
> The nature of the problem is that the port seems to ignore the setting stored
> in /var/db/ports/<portname>/options:
>
> I've used 'make config' to set the PYCAIRO option to on;
>
> slackbox# cat /var/db/ports/py27-py-stl/options
> # This file is auto-generated by 'make config'.
> # Options for py27-py-stl-3.1
> _OPTIONS_READ=py27-py-stl-3.1
> _FILE_COMPLETE_OPTIONS_LIST=PYCAIRO
> OPTIONS_FILE_SET+=PYCAIRO
>
> But the port seems to ignore it:
>
> slackbox# make showconfig
> ===> The following configuration options are available for py27-py-stl-3.1:
> PYCAIRO=off: Use (py)Cairo to enable stl2pdf
> ===> Use 'make config' to modify these settings
>
> slackbox# make -V PORT_OPTIONS
> DOCS EXAMPLES NLS
>
> Every time I do 'make config', the PYCAIRO option will be unset, even if it
> shows as set in /var/db/ports/<portname>/options!
>
> My port Makefile is as follows:
> ------------ port Makefile ----------------
> # New ports collection makefile for: py-stl
> # Date created: 28 Dec 2011
> # Whom: rsmith at xs4all.nl
> #
> # $FreeBSD$
>
> PORTNAME= py-stl
> PORTVERSION= 3.1
> CATEGORIES= graphics python
> MASTER_SITES= http://rsmith.home.xs4all.nl/software/
> PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX}
>
> MAINTAINER= rsmith at xs4all.nl
> COMMENT= Converts STL models to POV-Ray meshes or PostScript/PDF images
>
> USE_ZIP= YES
> USE_PYTHON= 2.5+
> USE_PYDISTUTILS= YES
>
> CONFLICTS= stl2pov-[0-9]*
>
> MAN1= stl2ps.1 stlinfo.1
>
> OPTIONS_DEFINE= PYCAIRO
> PYCAIRO_DESC= Use (py)Cairo to enable stl2pdf
>
> .include <bsd.port.options.mk>
>
> .if ${PORT_OPTIONS:MPYCAIRO}
> RUN_DEPENDS+= ${PYTHON_PKGNAMEPREFIX}cairo>1.8:${PORTSDIR}/graphics/py-cairo
> MAN1+= stl2pdf.1
> PLIST_SUB+= STL2PDF=""
> .else
> PLIST_SUB+= STL2PDF="@comment "
> .endif
>
> NO_BUILD= YES
>
> post-install:
> .if ${PORT_OPTIONS:MPYCAIRO}
> @${INSTALL_MAN} ${WRKSRC}/stl2pdf.1 ${MANPREFIX}/man/man1
> @${MV} ${PREFIX}/bin/stl2pdf.py ${PREFIX}/bin/stl2pdf
> .else
> @${RM} -f ${PREFIX}/bin/stl2pdf.py
> @${RM} -f ${MANPREFIX}/man/man1/stl2pdf.1*
> .endif
> @${INSTALL_MAN} ${WRKSRC}/stl2ps.1 ${MANPREFIX}/man/man1
> @${INSTALL_MAN} ${WRKSRC}/stlinfo.1 ${MANPREFIX}/man/man1
> @${MV} ${PREFIX}/bin/stl2ps.py ${PREFIX}/bin/stl2ps
> @${MV} ${PREFIX}/bin/stl2pov.py ${PREFIX}/bin/stl2pov
> @${MV} ${PREFIX}/bin/stlinfo.py ${PREFIX}/bin/stlinfo
> @${MV} ${PYTHON_SITELIBDIR}/py_stl-${PORTVERSION}-py${PYTHON_VER}.egg-info ${PYTHON_SITELIBDIR}/${PYDISTUTILS_EGGINFO}
>
> .include <bsd.port.mk>
> ------------ port Makefile ----------------
>
> I've looked at other ports makefiles and see no obvious defects. Help?
>
> Roland
> --
> R.F.Smith http://rsmith.home.xs4all.nl/
> [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated]
> pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725)
You found a nice bug.
The options file is read the thing is that the UNIQUENAME is changed is
py-py-stl when the optionsfile is read and it is py27-py-stl when it is written.
I don't know why yet, I'll fix it asap.
regards,
Bapt
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-ports/attachments/20120603/be60c845/attachment.pgp
More information about the freebsd-ports
mailing list