libreoffice-3.4.5.2 failing to build

[Da Rock]

On 03/30/12 17:03, Da Rock wrote:
> On 03/30/12 16:22, Baptiste Daroussin wrote:
>> On Thu, Mar 29, 2012 at 02:11:33PM +1000, Da Rock wrote:
>>> On 03/27/12 21:42, Da Rock wrote:
>>>> I've been hunting down some info on why this is failing, but all I
>>>> keep running into is the previous versions failings... :(
>>>>
>>>> I'm building libreoffice on 9.0-Release amd64, and I'm getting build
>>>> errors qa testing(?) sd. I followed the instructions, but it still
>>>> failed. It spits out this:
>>>>
>>>> scripting deliver
>>>> deliver -- version: 275594
>>>> module 'scripting' delivered successfully. 0 files copied, 28 files
>>>> unchanged
>>>> terminate called after throwing an instance of
>>>> 'com::sun::star::uno::RuntimeException'
>>>> /usr/local/bin/bash: line 1: 2019 Abort trap: 6 (core dumped)
>>>> [ a whole lot of code (I'm copying by hand, so it is a bit
>>>> overwhelming) - involving clone/impress/sd/unxfbsd.pro, solver, and
>>>> qa_unit ]
>>>> dmake: Error code 134, while making 'test'
>>>> gb_LinkTarget_add_library_objects,CppunitTest/libtest_sc_ucalc.so,sc
>>>> gb_LinkTarget_add_linktarget_objects,CppunitTest/libtest_sc_ucalc.so,Library/libscfb.so 
>>>>
>>>>
>>>> [ build all ] top level modules: sc
>>>> [ build all ] loaded modules: sc
>>>> [ build cut ] sc_ucalc
>>>> Abort trap (core dumped)
>>>> terminate called after throwing an instance of
>>>> 'com::sun::star::uno::RuntimeException'
>>>> gmake[1]: ***
>>>> [/usr/ports/editors/libreoffice/work/libreoffice-bootstrap-3.4.5.2/solver/340/unxfbsd.pro/workdir/CppunitTest/sc_ucalc.test] 
>>>>
>>>> Error 1
>>>> dmake: Error code 2, while making 'all'
>>>> [ build all ] top level modules: sw
>>>> [ build all ] loaded modules: sw
>>>> [ build all ] loaded modules: sw
>>>> [ build log ] sw
>>>> sw deliver
>>>> deliver -- version: 275594
>>>> Module 'sw' delivered successfully. 0 files copied, 1 files unchanged
>>>>
>>>> -----------------------------------------------------
>>>> [ standard error message with webpage link to debug page ]
>>>>
>>>> internal build errors:
>>>>
>>>> ERROR: error 65280 occurred while making
>>>> /usr/ports/editors/libreoffice/work/libreoffice-bootstrap-3.4.5.2/sd/qa/unit 
>>>>
>>>> ERROR: error 65280 occurred while making
>>>> /usr/ports/editors/libreoffice/work/libreoffice-bootstrap-3.4.5.2/sc/prj 
>>>>
>>>>
>>>> [ instructions to build sd part of the build to isolate the issue ]
>>>>
>>>> As I mentioned I followed the directions and still hit the same error
>>>> filed above (if more of the data is needed I guess I'll have to find a
>>>> way to post it...).
>>>>
>>>> I'm on a deadline for this one, so I have to get this to work. How
>>>> should I further debug this to fix it? Or failing that (as an extreme
>>>> last resort), will an older package already built work IF it is built
>>>> for 8.2?
>>> After a portsnap update I still get core dumps in the
>>> calc/sc/cppunittester and the impress/sd/qa/unit/cppunittester.
>>>
>>> I've tried turning off make jobs, and I also checked the core files
>>> (when I finally found them). The only clue I have is this:
>>>
>>> #0 0x00000008016bca7c in ??
>>>
>>> This is in _both_ core files, and although its not very helpful it says
>>> its stopping in exactly the same place (duh).
>>>
>>> Seriously guys, where do I go from here? Googling isn't exactly 
>>> offering
>>> up much - my searches can be as much as 7 results (usually my own stuff
>>> or duplicates of the same).
>>>
>>> Or, as my last resort, can I use the 8.2 package instead?
>>>
>>> Need some serious pointers, pleeease... :)
>> is you 9.0-RELEASE a freshly built system? or installed installed from
>> installers or upgraded?
> Completely clean install last week, and ports tree refreshed since on 
> wed.
>
> I've been on the libreoffice-dev lists and the only advice is to 
> disable the tests - but if the test is failing it must be for a reason 
> don't you think? So why?
>
> Thanks for these couple of responses, still need help though :)

  I have news from the eastern front :)

I've hotwired the makefile to use clang, and I have some errors cropping 
up close to where I was having issues using gcc:

In file included from 
/usr/ports/editors/libreoffice/work/libreoffice-bootstrap-3.4.5.2/soltools/giparser/gi_list.cxx:33:
In file included from ../inc/gi_list.hxx:33:
../inc/st_list.hxx:298:10: error: use of undeclared identfier 'push_back'
                 push_back( new XY(*(*it)) );
                 ^
                 this->
... more notes - usually related to this issue...
../inc/st_list.hxx:311:5: error: use of undeclared identifier 'checkSize'
                 checkSize(DynamicList<XY>::len-2);
                 ^
                 this->
... even more notes the last error...

And then the usual fail routine.

Any pointers on what is going on? What can I switch to improve the 
situation? The identifiers are there, but it doesn't seem to see that. 
Is this a C89/99 thing maybe?

I love clang - it shows up all the little nuances More than likely the 
root of my original issue...