build failure of ganglia-monitor-core-3.1.7

[Anton Shterenlikht]

On Tue, May 24, 2011 at 02:37:42AM -0500, Brooks Davis wrote:
> On Tue, May 24, 2011 at 10:19:40AM +0100, Anton Shterenlikht wrote:
> > On ia64 and sparc64, both current, I get
> > a build failure of ganglia-monitor-core-3.1.7
> > when updating from 3.1.1_6:
> > 
> > ===>  Building for ganglia-monitor-core-3.1.7
> > make: cannot open Makefile.
> > *** Error code 1
> > 
> > Stop in /usr/ports/sysutils/ganglia-monitor-core.
> 
> Does it work for you on any other platforms?

yes, builds on amd64. I should've checked, just
I don't need ganglia on amd64.

> If so, there is probably a
> configure failure above that needs to be analyzed.

http://seis.bris.ac.uk/~mexas/sparc64-ganglia-3.1.7-config.log
http://seis.bris.ac.uk/~mexas/ia64-ganglia-3.1.7-config.log

> 
> The output these commands after a failed build might also be helpful:
> 	cd /usr/ports/sysutils/ganglia-monitor-core
> 	ls -l `make -V WRKSRC`

http://seis.bris.ac.uk/~mexas/sparc64-ganglia-3.1.7-make-V_WRKSRC
http://seis.bris.ac.uk/~mexas/ia64-ganglia-3.1.7-make-V_WRKSRC

Many thanks
Anton

-- 
Anton Shterenlikht
Room 2.6, Queen's Building
Mech Eng Dept
Bristol University
University Walk, Bristol BS8 1TR, UK
Tel: +44 (0)117 331 5944
Fax: +44 (0)117 929 4423