/usr/ports/print/hplip3

[Adam Vande More]

/usr/ports/print/hplip3

The message in this port indicates you must recompile your kernel for it to
work.

> The printer MUST attach as a ugen(4) device.  This means
> that you must NOT have "device ulpt" in your kernel and
> ulpt must NOT be loaded as a kernel module.

That is not the experience that I have had with the port, although I had to
bork with the permissions to get it working.  The devfs.rules instructions
were not adequate to make it work.

lrwxrwxrwx  1 joe   cups             9 Mar  9 20:40 ugen0.1 -> usb/0.1.0
lrwxrwxrwx  1 joe   cups             9 Mar  9 20:40 ugen0.2 -> usb/0.2.0
lrwxrwxrwx  1 joe   cups             9 Mar  9 20:40 ugen0.3 -> usb/0.3.0
lrwxrwxrwx  1 joe   cups             9 Mar  9 20:40 ugen1.1 -> usb/1.1.0
lrwxrwxrwx  1 joe   cups             9 Mar  9 20:40 ugen1.2 -> usb/1.2.0
lrwxrwxrwx  1 joe   cups             9 Mar  9 20:40 ugen1.3 -> usb/1.3.0
crwxrwxrwx  1 joe   cups        0,  76 Mar  9 20:45 ulpt0

> usbconfig list
ugen0.1: <OHCI root HUB nVidia> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=ON
ugen1.1: <EHCI root HUB nVidia> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=ON
ugen1.2: <Deskjet D1600 series HP> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen0.2: <USB  AUDIO vendor 0x1130> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen1.3: <USB2.0-CRW Generic> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=ON
ugen0.3: <USB Receiver Logitech> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps)
pwr=ON

I under the permissions here are excessive, but it's unclear from the cups
log as how exactly cups is communicating with the printer.

It states the connection is made to
hp:/usb/Deskjet_D1600_series?serial=CN012C90C405CT

-- 
Adam Vande More