call for testing: print/hplip update, pass 2

[Juergen Lock]

On Sat, Jul 11, 2009 at 08:55:25AM +0200, Milan Obuch wrote:
> On Saturday 11 July 2009 00:15:42 Juergen Lock wrote:
> 
> [ snip ]
> 
> > > Build/install (well, I did portmaster hplip) went flawlessly, but when
> > > starting I got error
> > >
> > > Jul 10 08:35:43 wind python: [723]: error: dbus failed to load
> > > (python-dbus ver. 0.80+ required). Exiting...
> > >
> > > I added
> > >
> > > cupsd_enable="YES"
> > > dbus_enable="YES"
> > > hpssd_enable="YES"
> >
> > hpssd is no longer used btw, it has been replaced by hp-systray that
> > runs as your user.
> >
> 
> Does it mean line
> 
> hpssd_enable="YES"
> 
> should be taken out of /etc/rc.conf?

Well you don't _need_ to take it out, but it does nothing useful anymore
either.

>  If so, pkg-message of port should be 
> changed to not request this addition.
> 
 You may be right there... :)

> > > pkg_info | grep -i dbus
> > > dbus-1.2.4.6        A message bus system for inter-application
> > > communication dbus-glib-0.80      GLib bindings for the D-BUS messaging
> > > system dbus-qt3-0.70_2     Qt3 bindings for the D-BUS messaging system
> > > py25-dbus-0.83.0_1  Python bindings for the D-BUS messaging system
> > > py25-qt4-dbus-4.4.4,1 Python bindings for the Qt4 toolkit, D-BUS module
> > >
> > > so the minimal or better required version is installed, so what? Or did I
> > > not understand the message correctly?
> >
> >  Well, did you start dbus too? :)
> >
> 
> ps -ax | grep dbus
>   769  ??  Is     0:00.01 /usr/local/bin/dbus-daemon --system
> 23245  ??  Is     0:00.03 /usr/local/bin/dbus-daemon --fork --print-pid 
> 5 --print-address 7 --session
> 23455  ??  Is     0:00.03 /usr/local/bin/dbus-daemon --fork --print-pid 
> 5 --print-address 7 --session
> 23508  p4  S+     0:00.00 grep dbus
> 23454  p6  I      0:00.00 dbus-launch --autolaunch 
> 3f34b36a9821314210c5d7c84a0a5962 --binary-syntax --close-stderr
> 
> >  Or it could be that you also need qt4-dbus-4.4.3, at least I have that
> > installed here too (devel/dbus-qt4, probably pulled in by another
> > unrelated port here.)
> 
> I will try to install it too (and maybe possibly rebuild hplip again after 
> that change) and report the results here. But give me some time to do it, 
> please...

 I have another candidate for a possibly missing dependency:
devel/py-gobject - so try installing that too.

 HTH,
	Juergen