apr-gdbm-db42 upgrade conflicting with libtool

[Jeremy Messenger]

On Mon, 03 Aug 2009 11:39:33 -0500, David Southwell <david at vizion2000.net>  
wrote:

>> In message <20090803125519.GA60550 at twisted.net>,
>>
>> 	Troy (troy at twisted.net) wrote:
>> > I was trying to upgrade apr-gdbm-db42-1.3.6.1.3.8 to 1.3.7.1.3.8 and  
>> ran
>> > into the following error.  My libtool was just upgraded to  
>> libtool-2.2.6a
>> > so there may be a conflict there.  Anyone have ideas?
>> >
>> >
>> > checking minix/config.h usability... no
>> > checking minix/config.h presence... no
>> > checking for minix/config.h... no
>> > checking whether it is safe to define __EXTENSIONS__... yes
>> > checking for library containing strerror... none required
>> > checking whether system uses EBCDIC... no
>> > performing libtool configuration...
>> > ./configure: 9753: Syntax error: word unexpected (expecting ")")
>> > *** Error code 2
>> >
>> > Stop in /usr/ports/devel/apr.
>> > *** Error code 1
>> >
>> > Stop in /usr/ports/devel/apr.
>>
>> I am also having problems updating devel/apr.  In my case it gets past
>> the configure stage and fails during the compile stage:
>>
>> %%%%%
>>
>> ===>  Building for apr-gdbm-db43-1.3.7.1.3.8
<snip>
>> -I/usr/ports.workdir/usr/ports/devel/apr/work/apr-1.3.7/include  -o
>> passwd/apr_getpass.lo -c passwd/apr_getpass.c && touch
>> passwd/apr_getpass.lo /libtool: Can't open /libtool: No such file or
>> directory
>> *** Error code 2
>>
>> Stop in /usr/ports.workdir/usr/ports/devel/apr/work/apr-1.3.7.
>> *** Error code 1
>>
>> Stop in /usr/ports.workdir/usr/ports/devel/apr/work/apr-1.3.7.
>> *** Error code 1
>>
>> Stop in /usr/ports/devel/apr.
>> *** Error code 1
>>
>> Stop in /usr/ports/devel/apr.
>>
>> %%%%%
>>
>> I have not had time to try to figure out what is going wrong, but I may
>> have time tomorrow.
>>
>>
>> Cheers,
>>        Nick.
> I also have problems:
>
> uname -a
> FreeBSD dns1.vizion2000.net 7.2-RELEASE-p2 FreeBSD 7.2-RELEASE-p2 #0:  
> Wed Jun
> 24 00:14:35 UTC 2009     root at amd64-
> builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC  amd64
>
> Built on Intel quad Core
>
<snip>
> lt_cv_sys_max_cmd_len=262144
> /bin/sh ./buildconf
> buildconf: checking installation...
> buildconf: python not found.
>            You need python installed
>            to build APR from SVN.
> *** Error code 1
>
> Stop in /usr/ports/devel/apr.
> *** Error code 1
<snip>

I can't reproduce it. Pav has ran pointyhat-exp a few times and devel/apr  
has never came up, which it always passed build. Did all of you follow the  
/usr/ports/UPDATING?

Cheers,
Mezz


-- 
mezz7 at cox.net  -  mezz at FreeBSD.org
FreeBSD GNOME Team
http://www.FreeBSD.org/gnome/  -  gnome at FreeBSD.org