[dri] mach64.o kernel module version is 1.0.0, but version 2.x is needed (with 2.x >= 2.0).

[Alex Keda]

after upgrade from xorg7.2 to xorg7.3 I loss Direct rendering
(II) ATI(0): [drm] SAREA 2200+1208: 3408
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] loaded kernel module for "mach64" driver.
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) ATI(0): [drm] Using the DRM lock SAREA also for drawables.
(II) ATI(0): [drm] framebuffer handle = 0xf5000000
(II) ATI(0): [drm] added 1 reserved context for kernel
(II) ATI(0): X context handle = 0x1
(II) ATI(0): [drm] installed DRM signal handler
(EE) ATI(0): [dri] ATIDRIScreenInit failed because of a version mismatch.
[dri] mach64.o kernel module version is 1.0.0, but version 2.x is needed 
(with 2.x >= 2.0).
[dri] Disabling DRI.
(II) ATI(0): [drm] removed 1 reserved context for kernel
(II) ATI(0): [drm] unmapping 8192 bytes of SAREA 0xc33b7000 at 0x28f8f000
(II) ATI(0): [drm] Closed DRM master.
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0):    1024 x 1279 rectangle at 0,768
(II) ATI(0):    768 x 1280 rectangle at 0,768
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
       Screen to screen bit blits
       Solid filled rectangles
       8x8 mono pattern filled rectangles
       Indirect CPU to Screen color expansion
       Solid Lines
       Offscreen Pixmaps
       Setting up tile and stipple cache:
               32 128x128 slots
               10 256x256 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(II) ATI(0): Direct rendering disabled
(==) RandR enabled
=======================
where I can get new mach64.o module?