beryl missing windows decorations

[Petr Holub]

Hi,

I've tested current beryl (fresh portsnap from yesterday) on -CURRENT
and found it working (using NVidia 7600 GS, it idles at 98%, even while
windows are wobbling while being moved around with KDE+Beryl), except
when I switch from KWin to Beryl, I lose window decorations (titlebar,
borders, resizing handles). I've made sure, I've
    Option         "AllowGLXWithComposite" "True"
    Option         "RenderAccel" "True"
    Option         "AddARGBGLXVisuals" "True"
in Screen section and
Section "Extensions"
    Option         "Composite" "Enable"
EndSection
so I assume that should be OK. Any ideas, what's happening and who's to blame?
;-)

Installed packages in question:
beryl-0.2.1
beryl-core-0.2.1_1
beryl-manager-0.2.1_1
beryl-plugins-0.2.1_1
beryl-settings-0.2.1
beryl-settings-bindings-0.2.1
emerald-0.5.2
emerald-themes-0.5.2

xorg.conf is below.

Thanks,
Petr


Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    RgbPath         "/usr/local/share/X11/rgb"
    ModulePath      "/usr/local/lib/xorg/modules"
    FontPath        "/usr/local/lib/X11/fonts/misc/"
    FontPath        "/usr/local/lib/X11/fonts/TTF/"
    FontPath        "/usr/local/lib/X11/fonts/OTF"
    FontPath        "/usr/local/lib/X11/fonts/Type1/"
    FontPath        "/usr/local/lib/X11/fonts/100dpi/"
    FontPath        "/usr/local/lib/X11/fonts/75dpi/"
    FontPath        "/usr/local/lib/X11/fonts/Liberation/"
EndSection

Section "Module"
    Load           "extmod"
    Load           "record"
    Load           "dbe"
    Load           "xtrap"
    Load           "glx"
    Load           "freetype"
    Load           "type1"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option      "XkbLayout" "us,cz"
    Option      "XkbOptions" "grp:shifts_toggle,grp_led:scroll"
    Option      "XkbModel" "pc105"
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/sysmouse"
    Option         "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"

        #DisplaySize      380   300     # mm
 ### Comment all HorizSync and VertRefresh values to use DDC:
    Identifier     "Monitor0"
    VendorName     "HWP"
    ModelName      "HP L1955"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
    Identifier     "Card0"
    Driver         "nvidia"
    VendorName     "nVidia Corporation"
    BoardName      "G70 [GeForce 7600 GS]"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Card0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AllowGLXWithComposite" "True"
    Option         "RenderAccel" "True"
    Option         "AddARGBGLXVisuals" "True"
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection