opensync ports

Sun Jun 17 09:49:47 UTC 2007

Dear all,

I am new to porting and have tried to port opensync, and the result is
included as attachment.
I was however unsure about certain things and I'd like some help before
submitting a PR.

   - There is a devel/libopensync. I'm not sure if this is the same port.
   It appears to be, but this port is version 0.17. This was released
   04/23/05, so I thought I better start anew.

Should the port be called libopensync? or is opensync the correct name?

http://www.opensync.org/wiki/devel-branch-0.30 indicates that version
0.30seems to state that this is a devel version, I am however not so
sure about
how outdated that page is. This is another reason why perhaps it should have
a different name since the 0.3x seems to be a big step from the 0.2x(and
thus bigger than 0.17)

   - The following lines were also part of the install instructions.

# this is required that frontends and plugins find the opensync-1.0.pc file
export PKG_CONFIG_PATH=$OPENSYNC_BUILD/lib/pkgconfig:$PKG_CONFIG_PATH

was it correct of me to assume that
CONFIGURE_ENV=  PKG_CONFIG_PATH=${LOCALBASE}/lib/pkgconfig would be
equivalent?

   - Based on the pkg-plist I also assumed it had some libraries, so I
   added a USE_LDCONFIG=   yes, although I am hesitating if USE_LDCONFIG=
   ${PREFIX}/lib/ ${PREFIX}/lib/opensync/formats ${PREFIX}/lib/pkgconfig

it does compile fine *with* and *without* USE_LDCONFIG

   - Library dependencies. Is there a way to *know* what the port depends
   on except from the documentation provided? I couldn't find any dependancies
   in the documentation of opensync. My port does seem to clean
   scons-0.97, python24-2.4.4 and opensync-0.30.

Furthermore, since this is not an application, how can I *know" if this port
is succesfully ported?

Regards, Gabor
-------------- next part --------------
# This is a shell archive.  Save it in a file, remove anything before
# this line, and then unpack it by entering "sh file".  Note, it may
# create directories; files and directories will be owned by you and
# have default permissions.
#
# This archive contains:
#
#	opensync
#	opensync/pkg-descr
#	opensync/pkg-plist
#	opensync/distinfo
#	opensync/Makefile
#	opensync/pkg-message
#
echo c - opensync
mkdir -p opensync > /dev/null 2>&1
echo x - opensync/pkg-descr
sed 's/^X//' >opensync/pkg-descr << 'END-of-opensync/pkg-descr'
XOpenSync is a PIM (Personal Information Management) data synchronization 
Xframework that consists of several plug-ins that can be used to 
Xconnect to different devices and systems. For a list of currently supported
Xdevices see http://www.opensync.org/wiki/DeviceCompatibilityList.
XWWW: http://www.opensync.org/wiki/Evo2-File
END-of-opensync/pkg-descr
echo x - opensync/pkg-plist
sed 's/^X//' >opensync/pkg-plist << 'END-of-opensync/pkg-plist'
Xbin/osplugin
Xbin/osyncbinary
Xbin/osyncdump
Xinclude/opensync-1.0/opensync/archive/opensync_archive.h
Xinclude/opensync-1.0/opensync/data/opensync_change.h
Xinclude/opensync-1.0/opensync/data/opensync_data.h
Xinclude/opensync-1.0/opensync/engine/opensync_engine.h
Xinclude/opensync-1.0/opensync/engine/opensync_obj_engine.h
Xinclude/opensync-1.0/opensync/engine/opensync_status.h
Xinclude/opensync-1.0/opensync/file.h
Xinclude/opensync-1.0/opensync/format/opensync_converter.h
Xinclude/opensync-1.0/opensync/format/opensync_filter.h
Xinclude/opensync-1.0/opensync/format/opensync_format_env.h
Xinclude/opensync-1.0/opensync/format/opensync_objformat.h
Xinclude/opensync-1.0/opensync/format/opensync_time.h
Xinclude/opensync-1.0/opensync/group/opensync_group.h
Xinclude/opensync-1.0/opensync/group/opensync_group_env.h
Xinclude/opensync-1.0/opensync/group/opensync_member.h
Xinclude/opensync-1.0/opensync/helper/opensync_anchor.h
Xinclude/opensync-1.0/opensync/helper/opensync_hashtable.h
Xinclude/opensync-1.0/opensync/ipc/opensync_message.h
Xinclude/opensync-1.0/opensync/ipc/opensync_queue.h
Xinclude/opensync-1.0/opensync/ipc/opensync_serializer.h
Xinclude/opensync-1.0/opensync/mapping/opensync_mapping.h
Xinclude/opensync-1.0/opensync/mapping/opensync_mapping_entry.h
Xinclude/opensync-1.0/opensync/mapping/opensync_mapping_table.h
Xinclude/opensync-1.0/opensync/mapping/opensync_mapping_view.h
Xinclude/opensync-1.0/opensync/merger/opensync_capabilities.h
Xinclude/opensync-1.0/opensync/merger/opensync_capability.h
Xinclude/opensync-1.0/opensync/merger/opensync_merger.h
Xinclude/opensync-1.0/opensync/merger/opensync_xmlfield.h
Xinclude/opensync-1.0/opensync/merger/opensync_xmlfieldlist.h
Xinclude/opensync-1.0/opensync/merger/opensync_xmlformat.h
Xinclude/opensync-1.0/opensync/opensync-client.h
Xinclude/opensync-1.0/opensync/opensync-context.h
Xinclude/opensync-1.0/opensync/opensync-data.h
Xinclude/opensync-1.0/opensync/opensync-engine.h
Xinclude/opensync-1.0/opensync/opensync-error.h
Xinclude/opensync-1.0/opensync/opensync-format.h
Xinclude/opensync-1.0/opensync/opensync-group.h
Xinclude/opensync-1.0/opensync/opensync-helper.h
Xinclude/opensync-1.0/opensync/opensync-ipc.h
Xinclude/opensync-1.0/opensync/opensync-mapping.h
Xinclude/opensync-1.0/opensync/opensync-merger.h
Xinclude/opensync-1.0/opensync/opensync-module.h
Xinclude/opensync-1.0/opensync/opensync-plugin.h
Xinclude/opensync-1.0/opensync/opensync-serializer.h
Xinclude/opensync-1.0/opensync/opensync-support.h
Xinclude/opensync-1.0/opensync/opensync-time.h
Xinclude/opensync-1.0/opensync/opensync-version.h
Xinclude/opensync-1.0/opensync/opensync.h
Xinclude/opensync-1.0/opensync/opensync_list.h
Xinclude/opensync-1.0/opensync/opensync_xml.h
Xinclude/opensync-1.0/opensync/plugin/opensync_plugin.h
Xinclude/opensync-1.0/opensync/plugin/opensync_plugin_env.h
Xinclude/opensync-1.0/opensync/plugin/opensync_plugin_info.h
Xinclude/opensync-1.0/opensync/plugin/opensync_sink.h
Xinclude/opensync-1.0/opensync/version/opensync_version.h
Xlib/libopensync.so
Xlib/opensync/formats/libdata.so
Xlib/opensync/formats/libfile.so
Xlib/opensync/formats/libxmlformat-doc.so
Xlib/opensync/formats/libxmlformat.so
Xlib/pkgconfig/opensync-1.0.pc
Xlib/pkgconfig/osengine-1.0.pc
Xshare/opensync/capabilities/file-sync.xml
Xshare/opensync/capabilities/syncml-nokia-7650.xml
Xshare/opensync/descriptions/descriptions.xsd
Xshare/opensync/descriptions/miscellaneous.xml
Xshare/opensync/descriptions/syncml-nokia.xml
Xshare/opensync/descriptions/xmlformat-calendar.xsd
Xshare/opensync/descriptions/xmlformat-common.xsd
Xshare/opensync/descriptions/xmlformat-contact.xsd
Xshare/opensync/descriptions/xmlformat-event.xsd
Xshare/opensync/descriptions/xmlformat-note.xsd
Xshare/opensync/descriptions/xmlformat-todo.xsd
X at dirrm share/opensync/descriptions
X at dirrm share/opensync/capabilities
X at dirrm share/opensync
X at dirrm lib/pkgconfig
X at dirrm lib/opensync/formats
X at dirrm lib/opensync
X at dirrm include/opensync-1.0/opensync/version
X at dirrm include/opensync-1.0/opensync/plugin
X at dirrm include/opensync-1.0/opensync/merger
X at dirrm include/opensync-1.0/opensync/mapping
X at dirrm include/opensync-1.0/opensync/ipc
X at dirrm include/opensync-1.0/opensync/helper
X at dirrm include/opensync-1.0/opensync/group
X at dirrm include/opensync-1.0/opensync/format
X at dirrm include/opensync-1.0/opensync/engine
X at dirrm include/opensync-1.0/opensync/data
X at dirrm include/opensync-1.0/opensync/archive
X at dirrm include/opensync-1.0/opensync
X at dirrm include/opensync-1.0
END-of-opensync/pkg-plist
echo x - opensync/distinfo
sed 's/^X//' >opensync/distinfo << 'END-of-opensync/distinfo'
XMD5 (libopensync-0.30.tar.bz2?rev=&format=raw) = 1b52417878ab4ede584ce18edacfa548
XSHA256 (libopensync-0.30.tar.bz2?rev=&format=raw) = 0a1cfcb736d3569f8bced7e2e6c48d3168a0e97dee40705d09c5adfadcf6a463
XSIZE (libopensync-0.30.tar.bz2?rev=&format=raw) = 862123
END-of-opensync/distinfo
echo x - opensync/Makefile
sed 's/^X//' >opensync/Makefile << 'END-of-opensync/Makefile'
X# New ports collection makefile for:   libopensync
X# Date created:        16 June 2007
X# Whom:                gvtjongahung
X#
X# $FreeBSD$
X#
X
XPORTNAME=	opensync
XPORTVERSION=	0.30
XCATEGORIES=	devel
XMASTER_SITES=	http://www.opensync.org/attachment/wiki/download/
XDISTNAME=	libopensync-${PORTVERSION}
XEXTRACT_SUFX=	.tar.bz2\?rev=\&format=raw
X
XMAINTAINER=	ports at FreeBSD.org
XCOMMENT=	A PIM data synchronization framework
X
XUSE_BZIP2=	yes
XUSE_SCONS=	yes
XUSE_LDCONFIG=	yes
XSCONS_ARGS=	prefix=${PREFIX}
X## this is required that frontends and plugins find the opensync-1.0.pc file
X#export PKG_CONFIG_PATH=$OPENSYNC_BUILD/lib/pkgconfig:$PKG_CONFIG_PATH
XCONFIGURE_ENV=	PKG_CONFIG_PATH=${LOCALBASE}/lib/pkgconfig
XOPTIONS=	ENABLE_TRACING	"Enable tracing" off
X.if defined(WITH_ENABLE_TRACING)
X	        CONFIGURE_ENV+=		OSYNC_TRACE=/tmp/osync_trace/
X.endif
X.include <bsd.port.mk>
END-of-opensync/Makefile
echo x - opensync/pkg-message
sed 's/^X//' >opensync/pkg-message << 'END-of-opensync/pkg-message'
X@${ECHO_MSG} "Think about using a multisync-gui, start by trying to sync your various devices and applications one by one with a directory; then try to assemble the devices in the way you want."
X@${ECHO_MSG} "Do not disable the syncing of data, as it disables syncing everything." 
X@${ECHO_MSG} "See http://www.opensync.org/wiki/DeviceCompatibilityList for a list of compatible devices."
END-of-opensync/pkg-message
exit