FW: ports/115449: [MAINTAINER] astro/boinc-setiathome-enhanced:update to 5.27

[Kelly Hays]

On 8/21/07, Rene Ladan <r.c.ladan at gmail.com> wrote:
> Ladan, R.C. schreef:
> > [ Better discuss it via non-$REALJOB email address... ]
> >
> > Rene both tb's is from 19.08.07 with gcc 4.2.1, this build failed localy here build from 17.08 reproduct can you all with
> >  ports-mgmt/porttools and "port test".
> >
> I just did that (again, also when testing the update locally), it just builds fine.
> The log is at http://home.tiscali.nl/rladan/freebsd/port-test-sah527.bz2
> SIZE = 8322
> SHA256 = cf4e227af94b25187f0ba5d7f2682902c75e8f2a69a1400ca9ed8ee2e864edfb
>
> If you look at http://setiathome.berkeley.edu/results.php?userid=211311
> (could be down right now), you can see that the 5.27 client produces valid results.
>
> I also looked for xmmintrin.h in /usr/src/ObsoleteFiles.inc but didn't find anything
> in there.
> --
I am having problems building the 5.27 version from ports also. Please
let me know if I can provide any additional information. I have pasted
uname and dmesg below, I can get buildlog  posted to my website
tomorrow if that will help.
Thanks,
  Kelly



%uname -a
FreeBSD vorlon.jkhfamily.org 6.2-RELEASE-p6 FreeBSD 6.2-RELEASE-p6
#10: Sat Jul 28 21:56:57 CDT 2007
root at vorlon.jkhfamily.org:/usr/obj/usr/src/sys/GENERIC  i386
%dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p6 #10: Sat Jul 28 21:56:57 CDT 2007
    root at vorlon.jkhfamily.org:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <Nvidia AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.34-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20ff0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
  AMD Features2=0x1<LAHF>
real memory  = 1073676288 (1023 MB)
avail memory = 1033289728 (985 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfebfa000-0xfebfafff irq
21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfebf9000-0xfebf90ff
irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
pcm0: <nVidia nForce4> port 0xcc00-0xccff,0xc800-0xc8ff mem
0xfebfc000-0xfebfcfff irq 23 at device 4.0 on pci0
pcm0: <Avance Logic ALC658 AC97 Codec>
atapci0: <nVidia nForce CK804 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 6.0 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd400-0xd40f mem
0xfebfd000-0xfebfdfff irq 21 at device 7.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce CK804 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xe800-0xe80f mem
0xfebfe000-0xfebfefff irq 22 at device 8.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib1
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xfeaff000-0xfeaff7ff,0xfeaf8000-0xfeafbfff irq 19 at device 7.0 on
pci5
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:50:8d:00:00:d4:33:42
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:50:8d:d4:33:42
fwe0: Ethernet address: 02:50:8d:d4:33:42
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xfc00-0xfc07 mem
0xfebff000-0xfebfffff irq 23 at device 10.0 on pci0
nve0: Ethernet address 00:50:8d:49:b9:1e
miibus0: <MII bus> on nve0
ciphy0: <Cicada CS8201 10/100/1000TX PHY> on miibus0
ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nve0: Ethernet address: 00:50:8d:49:b9:1e
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci1: <ACPI PCI bus> on pcib5
nvidia0: <GeForce 6200 TurboCache(TM)> mem
0xfc000000-0xfcffffff,0xb0000000-0xbfffffff,0xcf000000-0xcfffffff irq
18 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Logitech USB Receiver, rev 1.10/17.21, addr 2, iclass 3/1
kbd2 at ukbd0
ums0: Logitech USB Receiver, rev 1.10/17.21, addr 2, iclass 3/1
ums0: 16 buttons and Z dir.
Timecounter "TSC" frequency 1808342376 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDR <AOPEN DUW1616/ARR/1000> at ata0-master UDMA33
ad2: 114473MB <Seagate ST3120026A 8.01> at ata1-master UDMA100
ad3: 38166MB <Seagate ST340014A 8.01> at ata1-slave UDMA100
cd0 at ata0 bus 0 target 0 lun 0
cd0: <AOPEN DUW1616/ARR 1000> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad2s1a
bridge0: Ethernet address: 32:d0:0b:ac:51:98
%