Bad system call (core dumped)

[Bachilo Dmitry]

В сообщении от Пятница 10 Февраль 2006 18:57 Fernan Aguero написал(a):
> +----[ Bachilo Dmitry <root at solink.ru> (10.Feb.2006 03:48):
> | I've tried to compile Xchat 2.6.1 from sources, it compiled with no
> | errors, but when I start xchat it gives me "Bad system call (core
> | dumped)".
>
> I don't know about this one, but
>
> | So i've cvsuped ports and compiled this version of Xchat from them firs
> | of all i've got Shared object "libexpat.so.5" not found, required by
> | "libfontconfig.so.1",
>
> when you cvsuped, the ports tree got updated and this included a
> new version of expat. Read /usr/ports/UPDATING always after
> you cvsup your ports.
>
> | and I've made a symbolic link
> | ln -s libexpat.so libexpat.so.5
>
> You should try to avoid doing this. When a you update a
> shared library to a new major version, it is recommended
> that you recompile all ports that were linked against this
> library.
>
> If you use portupgrade (sysutils/portupgrade), this can be
> easily done like this
>
> portupgrade -rf your_shared_library_port
>
> this will upgrade the shared library rebuild all ports that
> depend on it.
>
> In this case, it will be
>
> portupgrade -rf textproc/expat2
>
> as explained in UPDATING. But beware, this can take a looong
> time, as many ports depend on expat.
>
> Regards,
>
> Fernan
Ok, I have compiled new expat2, recompiled all depended soft, cvsuped (from 
cvsup.freebsd.org), built world, made kernel, in single-user mode made 
mergemaster -p, installed world and again mergemastered everything.

And I still get Bad system call (core dumped).

God, what have I done to you? :-)

Bocha at notebook:/usr/Bocha> uname -a
FreeBSD notebook.bochasnet.academ.local 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE 
#5: Tue Feb 14 09:24:18 NOVT 2006     
root at notebook.bochasnet.academ.local:/usr/obj/usr/src/sys/notebook  i386

Bocha at notebook:/usr/Bocha> dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #5: Tue Feb 14 09:24:18 NOVT 2006
    root at notebook.bochasnet.academ.local:/usr/obj/usr/src/sys/notebook
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.40GHz (2400.03-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNTX-ID,<b14>>
real memory  = 635371520 (605 MB)
avail memory = 612454400 (584 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 650 host to AGP bridge> mem 0xe8000000-0xebffffff at device 0.0 on 
pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962/963 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1000-0x100f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <simple comms, generic modem> at device 2.6 (no driver attached)
pcm0: <SiS 7012> port 0x1c00-0x1cff,0x1800-0x187f at device 2.7 on pci0
pcm0: <Avance Logic ALC200 AC97 Codec>
ohci0: <SiS 5571 USB controller> mem 0xec000000-0xec000fff irq 11 at device 
3.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xec001000-0xec001fff irq 10 at device 
3.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, USB> at device 3.2 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem 0xec003000-0xec0030ff 
irq 11 at device 10.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:90:f5:35:8a:45
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 
0xec003800-0xec003fff,0xec004000-0xec007fff irq 10 at device 11.0 on pci0
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:f5:00:00:35:8a:45
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:f5:35:8a:45
fwe0: Ethernet address: 02:90:f5:35:8a:45
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
cbb0: <ENE CB1410 PCI-CardBus Bridge> mem 0x80000000-0x80000fff irq 11 at 
device 12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on 
acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 drq 3 flags 0x10 
on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xdc000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2400025952 Hz quality 800
Timecounters tick every 1.000 msec
cardbus0: <network, ethernet> at device 0.0 (no driver attached)
ad0: 19077MB <Seagate ST92011A 3.04> at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SN-124/N102> at ata1-master PIO4
Trying to mount root from ufs:/dev/ad0s2a
pid 723 (xchat), uid 1001: exited on signal 12 (core dumped)
pid 728 (xchat), uid 1001: exited on signal 12 (core dumped)
pid 729 (xchat), uid 1001: exited on signal 12 (core dumped)
(this last three lines are about my xchat, as you understand)