BUS ERROR from freecolor

[PK]

 hi

I have Compaq Deskpro 4000, Processor Celeron 400MHz

# sysctl hw
hw.machine: i386
hw.model: Pentium II/Pentium II Xeon/Celeron
hw.ncpu: 1
hw.byteorder: 1234
hw.physmem: 527929344
hw.usermem: 424464384
hw.pagesize: 4096
hw.floatingpoint: 1
hw.machine_arch: i386
hw.realmem: 536870912
hw.aac.iosize_max: 65536
hw.an.an_dump: off
hw.an.an_cache_mode: dbm
hw.an.an_cache_mcastonly: 0
hw.an.an_cache_iponly: 1
hw.ata.ata_dma: 1
hw.ata.wc: 1
hw.ata.atapi_dma: 0
hw.cardbus.debug: 0
hw.cardbus.cis_debug: 0
hw.cs.debug: 0
hw.cs.ignore_checksum_failure: 0
hw.cs.recv_delay: 570
hw.firewire.try_bmr: 1
hw.firewire.hold_count: 3
hw.firewire.fwmem.eui64_hi: 0
hw.firewire.fwmem.eui64_lo: 0
hw.firewire.fwmem.speed: 2
hw.firewire.fwe.stream_ch: 1
hw.firewire.fwe.tx_speed: 2
hw.firewire.fwe.rx_queue_len: 128
hw.firewire.sbp.auto_login: 1
hw.firewire.sbp.max_speed: -1
hw.firewire.sbp.exclusive_login: 1
hw.firewire.sbp.login_delay: 1000
hw.firewire.sbp.scan_delay: 500
hw.firewire.sbp.use_doorbell: 0
hw.firewire.sbp.tags: 0
hw.pccard.debug: 0
hw.pccard.cis_debug: 0
hw.cbb.start_memory: 2281701376
hw.cbb.start_16_io: 256
hw.cbb.start_32_io: 4096
hw.cbb.debug: 0
hw.pcic.intr_mask: 57016
hw.pci.enable_io_modes: 1
hw.pci.do_powerstate: 0
hw.pci.host_mem_start: 2147483648
hw.pci.irq_override_mask: 57080
hw.wi.txerate: 0
hw.wi.debug: 0
hw.xe.debug: 0
hw.intr_storm_threshold: 500
hw.availpages: 128889
hw.bus.devctl_disable: 0
hw.dc_quick: 1
hw.ste.rxsyncs: 0
hw.kbd.keymap_restrict_change: 0
hw.syscons.saver.keybonly: 1
hw.syscons.bell: 1
hw.syscons.sc_no_suspend_vtswitch: 0
hw.busdma.total_bpages: 33
hw.busdma.zone0.total_bpages: 1
hw.busdma.zone0.free_bpages: 1
hw.busdma.zone0.reserved_bpages: 0
hw.busdma.zone0.active_bpages: 0
hw.busdma.zone0.total_bounced: 0
hw.busdma.zone0.total_deferred: 0
hw.busdma.zone0.lowaddr: 0xffffffff
hw.busdma.zone0.alignment: 4096
hw.busdma.zone0.boundary: 0
hw.busdma.zone1.total_bpages: 32
hw.busdma.zone1.free_bpages: 32
hw.busdma.zone1.reserved_bpages: 0
hw.busdma.zone1.active_bpages: 0
hw.busdma.zone1.total_bounced: 0
hw.busdma.zone1.total_deferred: 0
hw.busdma.zone1.lowaddr: 0xffffffff
hw.busdma.zone1.alignment: 2
hw.busdma.zone1.boundary: 65536
hw.clockrate: 399
hw.instruction_sse: 0
hw.em0.debug_info: -1
hw.em0.stats: -1
hw.em0.rx_int_delay: 0
hw.em0.tx_int_delay: 66
hw.em0.rx_abs_int_delay: 66
hw.em0.tx_abs_int_delay: 66

greetings
piotr




 --- On Thu 07/14, Tim Bishop < tim-lists at bishnet.net > wrote:
From: Tim Bishop [mailto: tim-lists at bishnet.net]
To: barner at FreeBSD.org
     Cc: freebsd-ports at freebsd.org, piotrekk at excite.com
Date: Thu, 14 Jul 2005 20:02:21 +0100
Subject: Re: BUS ERROR from freecolor

On Thu, 2005-07-14 at 16:26 +0200, Simon Barner wrote:<br>> PK wrote:<br>> > I have freeBSD 5.4 and newest ports tree update.<br>> > I've installed freecolor from ports without errors,<br>> > but if I try to start it, I get following error:<br>> <br>> Works fine here.<br>> <br>> Please report this to freecolor's maintainer (see the Makefile). This<br>> might be a 64bit issue, so tell him what platform you are seeing this<br>> error on.<br><br>He already has :)<br><br>It works for me also, and I even gave him a pre-compiled package that<br>was known to work on my system.<br><br>I hadn't thought about the 64 bit issue - PK, what platform are you<br>running this on? That said - it works on my sparc64...<br><br>Cheers,<br>Tim.<br><br>-- <br>Tim Bishop<br>http://www.bishnet.net/tim/<br>PGP Key: 0x5AE7D984<br><br>

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!