libusb

[Julian Elischer]

John,
Any chance you could get a port to 1.8 up ready to go in?


Goncalves Dominique wrote:
> Hi
> 
> I have a HP PSC 2175 printer USB, I have installed from ports cups, hpoj
> and libusb. ( FreeBSD 5.3-RC2 )
> 
> My printer is detected : 
> 
> venus# dmesg | grep ulpt
> ulpt0: Hewlett-Packard PSC 2170 Series, rev 2.00/1.00, addr 3, iclass
> 255/204
> ulpt0: using bi-directional mode
> 
> To configure cups I must before configure hpoj driver but 
> ptal-init script fails to find my printer
> 
> venus# /usr/local/etc/rc.d/020.ptal-init.sh.sample setup
> 
> Stopping the HP OfficeJet Linux driver.
> .....
> Probe for USB-connected devices ([y]/n)? y
> 
> Probing "%/dev/usb0%/dev/ugen0"...
> No device found.
> 
> .....
> Starting the HP OfficeJet Linux driver.
> No hpoj devices have been configured.
> As root, run "/usr/local/etc/rc.d/020.ptal-init.sh setup".
> 
> In /var/log/messages, i can see : 
> 
> Nov  3 10:37:33 venus ptal-mlcd: SYSLOG at ExMgr.cpp:652,
> dev=<mlc:usb:probe>, pid=19133, e=2, t=1099474653         ptal-mlcd
> successfully initialized.
> Nov  3 10:37:33 venus ptal-mlcd: SYSLOG at ExMgr.cpp:652,
> dev=<mlc:usb:probe>, pid=19140, e=61, t=1099474653         ptal-mlcd
> successfully initialized.
> Nov  3 10:37:33 venus ptal-mlcd: ERROR at ExMgr.cpp:2525,
> dev=<mlc:usb:probe>, pid=19140, e=22, t=1099474653         Couldn't find
> device!
> 
> I suspect a problem with the version of the ports of libusb.
> On the mailing list of the driver hpoj, it is indicated on several
> occasions that it is necessary used the last version of libusb so that
> hpoj functions under FreeBSD.
> 
> The ports version of libusb is 0.1.7_1, and the official webiste of
> libusb :
> 
> "The current stable version of libusb is 0.1.8. This release fixes a
> variety of bugs on all platforms and compile problems on BSD platforms.
> It is highly reccomended to use this version."
> 
> Why libusb is not upgraded?. An upgrade could break other ports ?
> 
> Thanks for your help
> 
> PS : sorry for my bad english
> 
> _______________________________________________
> freebsd-usb at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> To unsubscribe, send any mail to "freebsd-usb-unsubscribe at freebsd.org"