FreeBSD Port: cups-base-1.1.22.0

[mparem at paremski.us]

Hi,

I've just installed FreeBSD-5.3 with CUPS on my AMD XP 2200+ box with K7VTA3 
m/b + Samsung ML-4500 laser printer. Everything works fine except fist 
printer job. When I do my first printout after boot, it looks like CUPS tries 
to print, but nothing get printed. "Data" LED starts flashing on the printer, 
on CUPS's "manage printers" page I can see:

Printer State: processing, accepting jobs.

On system console "Interrupt storm detected on "irq7: lpt0"; throttling 
interrupt source" happenning. In /var/log/cups/error_log I have:

I [05/Dec/2004:08:44:03 -0800] Listening to 0:631
I [05/Dec/2004:08:44:03 -0800] Loaded configuration file 
"/usr/local/etc/cups/cupsd.conf"
I [05/Dec/2004:08:44:03 -0800] Configured for up to 100 clients.
I [05/Dec/2004:08:44:03 -0800] Allowing up to 100 client connections per 
host.
I [05/Dec/2004:08:44:03 -0800] Full reload is required.
I [05/Dec/2004:08:44:07 -0800] LoadPPDs: Read 
"/usr/local/etc/cups/ppds.dat", 14 PPDs...
I [05/Dec/2004:08:44:07 -0800] LoadPPDs: No new or changed PPDs...
I [05/Dec/2004:08:44:07 -0800] Full reload complete.
I [05/Dec/2004:08:46:01 -0800] Started 
"/usr/local/libexec/cups/cgi-bin/jobs.cgi" (pid=676)
I [05/Dec/2004:08:46:03 -0800] Started 
"/usr/local/libexec/cups/cgi-bin/jobs.cgi" (pid=677)
I [05/Dec/2004:08:46:09 -0800] Started 
"/usr/local/libexec/cups/cgi-bin/printers.cgi" (pid=678)
I [05/Dec/2004:08:53:30 -0800] Adding start banner page "none" to job 36.
I [05/Dec/2004:08:53:30 -0800] Adding end banner page "none" to job 36.
I [05/Dec/2004:08:53:30 -0800] Job 36 queued on 'Samsung' by 'nparem'.
I [05/Dec/2004:08:53:30 -0800] Started filter 
/usr/local/libexec/cups/filter/pstops (PID 703) for job 36.
I [05/Dec/2004:08:53:30 -0800] Started filter 
/usr/local/libexec/cups/filter/foomatic-rip (PID 704) for job 36.
I [05/Dec/2004:08:53:30 -0800] Started backend 
/usr/local/libexec/cups/backend/parallel (PID 705) for job 36.
I [05/Dec/2004:08:55:57 -0800] Adding start banner page "none" to job 37.
I [05/Dec/2004:08:55:57 -0800] Adding end banner page "none" to job 37.
I [05/Dec/2004:08:55:57 -0800] Job 37 queued on 'Samsung' by 'nparem'.
I [05/Dec/2004:08:55:57 -0800] Started filter 
/usr/local/libexec/cups/filter/pstops (PID 732) for job 37.
I [05/Dec/2004:08:55:57 -0800] Started filter 
/usr/local/libexec/cups/filter/foomatic-rip (PID 733) for job 37.
I [05/Dec/2004:08:55:57 -0800] Started backend 
/usr/local/libexec/cups/backend/parallel (PID 734) for job 37.
I [05/Dec/2004:08:56:53 -0800] Started 
"/usr/local/libexec/cups/cgi-bin/printers.cgi" (pid=751)
I [05/Dec/2004:09:02:04 -0800] Started 
"/usr/local/libexec/cups/cgi-bin/jobs.cgi" (pid=794)
I [05/Dec/2004:09:02:07 -0800] Started 
"/usr/local/libexec/cups/cgi-bin/jobs.cgi" (pid=795)

Now, If I turn off/on printer, that printer job marked how succesfully 
finished, printer stutus is idle, and Data LED does not flashing. But now I'm 
able to print new jobs with out problems. Only:

Dec  5 09:20:45 parcom3 kernel: stray irq7
Dec  5 09:20:47 parcom3 last message repeated 3 times
Dec  5 09:20:49 parcom3 kernel: too many stray irq 7's: not logging anymore

printout happens for first printer job. Is it known problem and is there any 
way to fix it?

Thanks,
Mikhail.