FreeBSD Port: ntp-4.2.0_1

[Andy Taki]

'Tristate Ltd. JJY receiver' dose not work?

My configure;
- FreeBSD 4.10-RELEASE
- My kernel was compiled with 'options PPS_SYNC'.
- 'JJY receiver' test
    cu -l /dev/jjy1
    Connected.
    2004/08/22 SUN
    16:27:09
    ~[mypc].
- ntp.conf
    cat /etc/ntp.conf
    server 127.127.40.1 prefer mode 1
    driftfile /var/ntpd/drift
    statsdir /var/ntpd/stats/
    logfile /var/ntpd/log
    pidfile /var/ntpd/pid
    filegen peerstats file peerstats type day enable
    filegen loopstats file loopstats type day enable
    filegen clockstats file clockstats type day enable
- directories
    ls -lRa /var/ntpd
    total 12
    drwxr-xr-x   3 root  wheel   512 Aug 22 04:11 .
    drwxr-xr-x  21 root  wheel   512 Aug 22 04:10 ..
    -rw-r--r--   1 root  wheel  2079 Aug 22 06:54 log
    -rw-r--r--   1 root  wheel     5 Aug 22 06:54 pid
    drwxr-xr-x   2 root  wheel   512 Aug 22 04:10 stats

    /var/ntpd/stats:
    total 4
    drwxr-xr-x  2 root  wheel  512 Aug 22 04:10 .
    drwxr-xr-x  3 root  wheel  512 Aug 22 04:11 ..

When I start the ntpd, I got the following messages and the ntpd
dose not work.
-----
/usr/local/bin/ntpd -d -D3
Debug1: 3 -> 3 = 3
ntpd 4.2.0 at 1.1161-r Sun Aug 22 06:17:30 JST 2004 (1)
Debug1: 3 -> 3 = 3
addto_syslog: ntpd 4.2.0 at 1.1161-r Sun Aug 22 06:17:30 JST 2004 (1)
addto_syslog: set_process_priority: Leave priority alone: priority_done is <2>
addto_syslog: precision = 7.542 usec
create_sockets(123)
address_okay: listen Virtual: 1, IF name: fxp0, Up Flag: 1
address_okay: listen Virtual: 1, IF name: fxp0, Up Flag: 1
address_okay: listen Virtual: 1, IF name: lo0, Up Flag: 1
address_okay: listen Virtual: 1, IF name: lo0, Up Flag: 1
address_okay: listen Virtual: 1, IF name: lo0, Up Flag: 1
bind() fd 4, family 2, port 123, addr 0.0.0.0, flags=8
flags for fd 4: 06
bind() fd 5, family 28, port 123, addr ::, flags=0
flags for fd 5: 06
bind() fd 6, family 2, port 123, addr 192.168.0.25, flags=8
flags for fd 6: 06
bind() fd 7, family 28, port 123, addr fe80:1::2e0:18ff:fe80:4dd3, flags=0
flags for fd 7: 06
bind() fd 8, family 28, port 123, addr ::1, flags=0
flags for fd 8: 06
bind() fd 9, family 28, port 123, addr fe80:3::1, flags=0
flags for fd 9: 06
bind() fd 10, family 2, port 123, addr 127.0.0.1, flags=0
flags for fd 10: 06
create_sockets: ninterfaces=7
interface 0:  fd=4,  bfd=-1,  name=wildcard,  flags=0x8
              sin=0.0.0.0  bcast=0.0.0.0,  mask=255.255.255.255
interface 1:  fd=5,  bfd=-1,  name=wildcard,  flags=0x0
              sin=::  mask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
interface 2:  fd=6,  bfd=-1,  name=fxp0,  flags=0x9
              sin=192.168.0.25  bcast=192.168.0.255,  mask=255.255.255.0
interface 3:  fd=7,  bfd=-1,  name=fxp0,  flags=0x1
              sin=fe80:1::2e0:18ff:fe80:4dd3  mask=ffff:ffff:ffff:ffff::
interface 4:  fd=8,  bfd=-1,  name=lo0,  flags=0x5
              sin=::1  mask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
interface 5:  fd=9,  bfd=-1,  name=lo0,  flags=0x5
              sin=fe80:3::1  mask=ffff:ffff:ffff:ffff::
interface 6:  fd=10,  bfd=-1,  name=lo0,  flags=0x5
              sin=127.0.0.1  mask=255.0.0.0
init_io: maxactivefd 10
local_clock: at 0 state 0
Debug2: 3 -> 3 = 3
getnetnum given 127.127.40.1, got 127.127.40.1
key_expire: at 0
peer_clear: at 0 assoc ID 44700 refid INIT
jjy_start (refclock_jjy.c) : 127.127.40.1  mode=1  /dev/jjy1
refclock_open: fd 12 modem status 0x127
refclock_ioctl: fd 12 flags 0x1
newpeer: 127.0.0.1->127.127.40.1 mode 3 vers 4 poll 6 6 flags 0xa1 0x1 ttl 1 key 00000000
configuring filegen:
        prefix: /var/ntpd/stats/
        basename:       peerstats -> peerstats
        type:   2 -> 2
        flag: 1 -> 81
configuring filegen:
        prefix: /var/ntpd/stats/
        basename:       loopstats -> loopstats
        type:   2 -> 2
        flag: 1 -> 81
configuring filegen:
        prefix: /var/ntpd/stats/
        basename:       clockstats -> clockstats
        type:   2 -> 2
        flag: 1 -> 81
authtrust: keyid 0000ffff life 1
report_event: system event 'event_restart' (0x01) status 'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010)
addto_syslog: select(): nfound=-1, error: Interrupted system call

jjy_poll (refclock_jjy.c) : 0
poll_update: at 1 127.127.40.1 flags 00a1 poll 6 burst 0 last 0 next 64
auth_agekeys: at 1 keys 1 expired 0
timer: refresh ts 0
refclock_gtlin: fd 12 time 3302114047.698195 timecode 14 2004/08/22 SUN
refclock_gtlin: fd 12 time 3302114047.698195
addto_syslog: select(): nfound=-1, error: Interrupted system call
-----

When I start the ntpd with configured refer other NTP server,
It become a NTP server such as 'stratum 2' normaly.

I am not sure where this problem come from.

Andy Taki
andy at pob.jp