proposal to enable to skip installation of perl mod man pages
Masafumi NAKANE
max at FreeBSD.org
Fri Dec 5 02:03:48 PST 2003
Hi,
I've been wanting to install perl and p5-* modules without modules'
man pages mainly because:
1. I don't need them since I just use perldoc whenever I need them.
2. Takes much more time to build and install those ports
Now, I did a quick hack (patch below) to make it possible to
optionally disable installation of man pages of perl modules.
As you can see, with this patch:
1. If you build lang/perl5{,.8} with NO_PERL_MAN3 defined, Configure
is run with -Dman3dir=' ', resulting in skipping of mod man page
installation.
2. For any p5-* port that uses MakeMaker module (PERL_CONFIGURE=yes),
MAN3 will be undef'ed if either NO_PERL_MAN3 is defined, or
${PERL5} was build and installed with NO_PERL_MAN3.
I tested the patch on 4-STABLE box, by doing portupgrade -fr perl, and
it seems to be working ok.
Since this patch is supposed to affect no port unless NO_PERL_MAN3 is
explicitly specified, I think it's probably safe to be integrated, but
I certainly would like to know if there's better ways to achieve this,
or if I'm totally overlooking something.
Cheers,
Max
----------
Index: bsd.port.mk
===================================================================
RCS file: /home/ncvs/ports/Mk/bsd.port.mk,v
retrieving revision 1.474
diff -u -r1.474 bsd.port.mk
--- bsd.port.mk 24 Nov 2003 01:08:41 -0000 1.474
+++ bsd.port.mk 5 Dec 2003 08:41:58 -0000
@@ -1103,6 +1103,12 @@
.else
PERL5= ${LOCALBASE}/bin/perl${PERL_VERSION}
PERL= ${LOCALBASE}/bin/perl
+. if !defined(NO_PERL_MAN3)
+_PERL_INSTALLMAN3DIR!= ${PERL5} -MConfig -e 'print "$Config{installman3dir}";'
+. if empty(_PERL_INSTALLMAN3DIR)
+NO_PERL_MAN3= yes
+. endif
+. endif
.endif
.if defined(USE_OPENSSL)
@@ -2420,7 +2426,11 @@
CONFIGURE_ARGS+= CC="${CC}" CCFLAGS="${CFLAGS}" PREFIX="${PREFIX}" \
INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib"
CONFIGURE_SCRIPT?= Makefile.PL
+. if !defined(NO_PERL_MAN3)
MAN3PREFIX?= ${PREFIX}/lib/perl5/${PERL_VERSION}
+. else
+. undef MAN3
+. endif
.undef HAS_CONFIGURE
.endif
Index: Makefile
===================================================================
RCS file: /home/ncvs/ports/lang/perl5.8/Makefile,v
retrieving revision 1.66
diff -u -r1.66 Makefile
--- Makefile 25 Nov 2003 18:48:26 -0000 1.66
+++ Makefile 5 Dec 2003 08:43:17 -0000
@@ -29,7 +29,6 @@
CONFIGURE_ARGS= -sde -Dprefix=${PREFIX} \
-Darchlib=${PREFIX}/lib/perl5/${PERL_VER}/${PERL_ARCH} \
-Dprivlib=${PREFIX}/lib/perl5/${PERL_VER} \
- -Dman3dir=${PREFIX}/lib/perl5/${PERL_VER}/man/man3 \
-Dman1dir=${PREFIX}/man/man1 \
-Dsitearch=${SITE_PERL}/${PERL_ARCH} \
-Dsitelib=${SITE_PERL} -Dscriptdir=${PREFIX}/bin \
@@ -76,6 +75,12 @@
CONFIGURE_ARGS+= -Dusemymalloc=n
.endif
+.if !defined(NO_PERL_MAN3)
+CONFIGURE_ARGS+= -Dman3dir=${PREFIX}/lib/perl5/${PERL_VER}/man/man3
+.else
+CONFIGURE_ARGS+= -Dman3dir=" "
+.endif
+
INCLUDEDIR= /usr/include
.include <bsd.port.pre.mk>
@@ -112,6 +117,7 @@
perlartistic.1 perlcheat.1 perlgpl.1 perlmacosx.1 perlos400.1 \
perlreref.1
+.if !defined(NO_PERL_MAN3)
MAN3= AnyDBM_File.3 Attribute::Handlers.3 AutoLoader.3 AutoSplit.3 \
B.3 B::Asmdata.3 B::Assembler.3 \
B::Bblock.3 B::Bytecode.3 B::C.3 B::CC.3 B::Concise.3 \
@@ -201,6 +207,7 @@
MAN3+= GDBM_File.3
.endif
MAN3PREFIX= ${PREFIX}/lib/perl5/${PERL_VER}
+.endif
LATEST_LINK= perl5.8
Index: Makefile
===================================================================
RCS file: /home/ncvs/ports/lang/perl5/Makefile,v
retrieving revision 1.58
diff -u -r1.58 Makefile
--- Makefile 30 Sep 2003 08:33:56 -0000 1.58
+++ Makefile 5 Dec 2003 08:59:06 -0000
@@ -28,7 +28,6 @@
CONFIGURE_ARGS= -sde -Dprefix=${PREFIX} \
-Darchlib=${PREFIX}/lib/perl5/${PERL_VER}/${PERL_ARCH} \
-Dprivlib=${PREFIX}/lib/perl5/${PERL_VER} \
- -Dman3dir=${PREFIX}/lib/perl5/${PERL_VER}/man/man3 \
-Dsitearch=${PREFIX}/lib/perl5/site_perl/${PERL_VER}/${PERL_ARCH} \
-Dsitelib=${PREFIX}/lib/perl5/site_perl/${PERL_VER} \
-Dscriptdir=${PREFIX}/bin \
@@ -51,6 +50,12 @@
CONFIGURE_ARGS+= -Dusemymalloc=n
.endif
+.if !defined(NO_PERL_MAN3)
+CONFIGURE_ARGS+= -Dman3dir=${PREFIX}/lib/perl5/${PERL_VER}/man/man3
+.else
+CONFIGURE_ARGS+= -Dman3dir=" "
+.endif
+
INCLUDEDIR= /usr/include
.ifdef USE_PERL5
@@ -87,6 +92,7 @@
pod2usage.1 podchecker.1 podselect.1 pstruct.1 s2p.1 \
splain.1 xsubpp.1
+.if !defined(NO_PERL_MAN3)
MAN3= AnyDBM_File.3 AutoLoader.3 AutoSplit.3 B.3 B::Asmdata.3 \
B::Assembler.3 B::Bblock.3 B::Bytecode.3 B::C.3 B::CC.3 \
B::Concise.3 B::Debug.3 B::Deparse.3 B::Disassembler.3 \
@@ -139,6 +145,7 @@
.endif
MAN3PREFIX= ${PREFIX}/lib/perl5/${PERL_VER}
+.endif
test:
@(cd ${WRKSRC}; make test)
----------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-ports/attachments/20031205/758e8c00/attachment.bin
More information about the freebsd-ports
mailing list