[Bug 224599] net-p2p/monero-cli: Segmentation fault with any operation
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Tue Dec 26 15:43:24 UTC 2017
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=224599
Bug ID: 224599
Summary: net-p2p/monero-cli: Segmentation fault with any
operation
Product: Ports & Packages
Version: Latest
Hardware: amd64
OS: Any
Status: New
Severity: Affects Only Me
Priority: ---
Component: Individual Port(s)
Assignee: freebsd-ports-bugs at FreeBSD.org
Reporter: thierry at FreeBSD.org
Trying to run monerod, with any arg, ends with a segfault:
$ gdb801 /usr/local/bin/monerod
GNU gdb (GDB) 8.0.1 [GDB v8.0.1 for FreeBSD]
Copyright (C) 2017 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-portbld-freebsd11.0".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/local/bin/monerod...(no debugging symbols
found)...done.
(gdb) r --help
Starting program: /usr/local/bin/monerod --help
Monero 'Helium Hydra' (v0.11.1.0-release)
Usage: /usr/local/bin/monerod [options|settings] [daemon_command...]
Options:
--help Produce help message
--version Output version information
--os-version OS for which this executable was
compiled
--config-file arg (=/home/thierry/.bitmonero/bitmonero.conf)
Specify configuration file
--test-dbg-lock-sleep arg (=0) Sleep time in ms, defaults to 0 (off),
used to debug before/after locking
mutex. Values 100 to 1000 are good for
tests.
--detach Run as daemon
--pidfile arg File path to write the daemon's PID to
(optional, requires --detach)
--non-interactive Run non-interactive
Settings:
--log-file arg (=/home/thierry/.bitmonero/bitmonero.log)
Specify log file
--log-level arg
--max-concurrency arg (=0) Max number of threads to use for a
parallel job
--data-dir arg (=/home/thierry/.bitmonero)
Specify data directory
--testnet-data-dir arg (=/home/thierry/.bitmonero/testnet)
Specify testnet data directory
--test-drop-download For net tests: in download, discard ALL
blocks instead checking/saving them
(very fast)
--test-drop-download-height arg (=0) Like test-drop-download but disards
only after around certain height
--testnet Run on testnet. The wallet must be
launched with --testnet flag.
--enforce-dns-checkpointing checkpoints from DNS server will be
enforced
--db-type arg (=lmdb) Specify database type, available: lmdb
--prep-blocks-threads arg (=4) Max number of threads to use when
preparing block hashes in groups.
--fast-block-sync arg (=1) Sync up most of the way by using
embedded, known block hashes.
--db-sync-mode arg (=fast:async:1000) Specify sync option, using format
[safe|fast|fastest]:[sync|async]:[nbloc
ks_per_sync].
--db-salvage Try to salvage a blockchain database if
it seems corrupted
--show-time-stats arg (=0) Show time-stats when processing
blocks/txs and disk synchronization.
--block-sync-size arg (=0) How many blocks to sync at once during
chain synchronization (0 = adaptive).
--check-updates arg (=notify) Check for new versions of monero:
[disabled|notify|download|update]
--fluffy-blocks Relay blocks as fluffy blocks where
possible (automatic on testnet)
--testnet-p2p-bind-port arg (=28080) Port for testnet p2p network protocol
--p2p-bind-port arg (=18080) Port for p2p network protocol
--extra-messages-file arg Specify file for extra messages to
include into coinbase transactions
--start-mining arg Specify wallet address to mining for
--mining-threads arg Specify mining threads count
--bg-mining-enable enable/disable background mining
--bg-mining-ignore-battery if true, assumes plugged in when unable
to query system power status
--bg-mining-min-idle-interval arg Specify min lookback interval in
seconds for determining idle state
--bg-mining-idle-threshold arg Specify minimum avg idle percentage
over lookback interval
--bg-mining-miner-target arg Specificy maximum percentage cpu use by
miner(s)
--p2p-bind-ip arg (=0.0.0.0) Interface for p2p network protocol
--p2p-external-port arg (=0) External port for p2p network protocol
(if port forwarding used with NAT)
--allow-local-ip Allow local ip add to peer list, mostly
in debug purposes
--add-peer arg Manually add peer to local peerlist
--add-priority-node arg Specify list of peers to connect to and
attempt to keep the connection open
--add-exclusive-node arg Specify list of peers to connect to
only. If this option is given the
options add-priority-node and seed-node
are ignored
--seed-node arg Connect to a node to retrieve peer
addresses, and disconnect
--hide-my-port Do not announce yourself as peerlist
candidate
--no-igd Disable UPnP port mapping
--offline Do not listen for peers, nor connect to
any
--out-peers arg (=-1) set max number of out peers
--tos-flag arg (=-1) set TOS flag
--limit-rate-up arg (=-1) set limit-rate-up [kB/s]
--limit-rate-down arg (=-1) set limit-rate-down [kB/s]
--limit-rate arg (=-1) set limit-rate [kB/s]
--save-graph Save data for dr monero
--rpc-bind-port arg (=18081) Port for RPC server
--testnet-rpc-bind-port arg (=28081) Port for testnet RPC server
--restricted-rpc Restrict RPC to view only commands
--rpc-bind-ip arg (=127.0.0.1) Specify ip to bind rpc server
--rpc-login arg Specify username[:password] required
for RPC server
--confirm-external-bind Confirm rpc-bind-ip value is NOT a
loopback (local) IP
Program received signal SIGSEGV, Segmentation fault.
0x000000080407dd59 in __je_tcache_dalloc_small (tsd=<optimized out>,
tcache=0x805c0d000, ptr=0x805c36400, binind=<optimized out>, slow_path=false)
at /usr/src/contrib/jemalloc/include/jemalloc/internal/tcache.h:415
415 if (unlikely(tbin->ncached == tbin_info->ncached_max)) {
(gdb) bt
#0 0x000000080407dd59 in __je_tcache_dalloc_small (tsd=<optimized out>,
tcache=0x805c0d000, ptr=0x805c36400, binind=<optimized out>, slow_path=false)
at /usr/src/contrib/jemalloc/include/jemalloc/internal/tcache.h:415
#1 __je_arena_dalloc (tsdn=<optimized out>, ptr=<optimized out>,
tcache=<optimized out>, slow_path=false)
at /usr/src/contrib/jemalloc/include/jemalloc/internal/arena.h:1438
#2 __je_idalloctm (is_metadata=false, slow_path=false, tsdn=<optimized out>,
ptr=<optimized out>, tcache=<optimized out>)
at
/usr/src/contrib/jemalloc/include/jemalloc/internal/jemalloc_internal.h:1067
#3 __je_iqalloc (tsd=<optimized out>, ptr=<optimized out>, tcache=<optimized
out>, slow_path=<optimized out>)
at
/usr/src/contrib/jemalloc/include/jemalloc/internal/jemalloc_internal.h:1084
#4 ifree (tsd=0x0, ptr=<optimized out>, tcache=<optimized out>,
slow_path=<optimized out>) at jemalloc_jemalloc.c:1815
#5 0x000000080407e311 in __free (ptr=0x805c36400) at jemalloc_jemalloc.c:1935
#6 0x00000000007c7aaa in ?? ()
#7 0x00000000007e3135 in ?? ()
#8 0x00000000007e31ee in ?? ()
#9 0x00000000007e585f in ?? ()
#10 0x00000000007e350e in ?? ()
#11 0x00000000007d9f3a in ?? ()
#12 0x00000000007da0be in ?? ()
#13 0x00000000007e1b51 in ?? ()
#14 0x00000008040f6611 in __cxa_finalize (dso=0x0) at
/usr/src/lib/libc/stdlib/atexit.c:235
#15 0x0000000804085be1 in exit (status=0) at /usr/src/lib/libc/stdlib/exit.c:72
#16 0x0000000000425046 in ?? ()
#17 0x0000000800ba3000 in ?? ()
#18 0x0000000000000000 in ?? ()
Note: same thing with monero-wallet-cli.
Sorry, no symbol available: this port is unbuildable if WITH_DEBUG is set.
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the freebsd-ports-bugs
mailing list