[Bug 210041] sysutils/u-boot-rpi: Add start_x.elf to rpi-boot-files-2016.01.tar.bz2 in order to use the camera module for the RaspberryPi 1 and Zero

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=210041

            Bug ID: 210041
           Summary: sysutils/u-boot-rpi: Add start_x.elf to
                    rpi-boot-files-2016.01.tar.bz2 in order to use the
                    camera module for the RaspberryPi 1 and Zero
           Product: Ports & Packages
           Version: Latest
          Hardware: Any
                OS: Any
            Status: New
          Severity: Affects Many People
          Priority: ---
         Component: Individual Port(s)
          Assignee: ian at FreeBSD.org
          Reporter: s_mitu at os.rim.or.jp
          Assignee: ian at FreeBSD.org
             Flags: maintainer-feedback?(ian at FreeBSD.org)

For using the Camera module in the RaspberryPi 1, I did
https://wiki.freebsd.org/FreeBSD/arm/Raspberry%20Pi%20Camerathe, but
RaspberryPi 1 did not boot.
I got start_x.elf from
https://github.com/raspberrypi/firmware/blob/fbe36330696cc82a87fc24ad5b5f896be2b1460f/boot/start_x.elf
(is same date of rpi-boot-files-2016.01.tar.bz2 files ), mounted the MSDOS
partition of the latest RPI-B snapshot, and copied it. I did the wiki again,
the Raspberry Pi 1 booted and the Camera module worked.
Probably the Raspberry Pi Zero (new version has the camera connector) will work
too(I tested that the Zero and the New Zero booted. But I do not get the camera
cable for the New Zero yet).

Add start_x.elf in rpi-boot-files-2016.01.tar.bz2, and the Camera module will
work in the RaspberryPi 1 and Zero,

-- 
You are receiving this mail because:
You are the assignee for the bug.