ports/187596: [MAINTAINER] dns/nsd: update to 4.0.3

[Jaap Akkerhuis]

>Number:         187596
>Category:       ports
>Synopsis:       [MAINTAINER] dns/nsd: update to 4.0.3
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-ports-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          maintainer-update
>Submitter-Id:   current-users
>Arrival-Date:   Fri Mar 14 22:30:00 UTC 2014
>Closed-Date:
>Last-Modified:
>Originator:     Jaap Akkerhuis
>Release:        FreeBSD 9.2-STABLE amd64
>Organization:
NLnet Labs
>Environment:
System: FreeBSD bela.nlnetlabs.nl 9.2-STABLE FreeBSD 9.2-STABLE #19 r262971: Mon Mar 10 12:51:39 CET
>Description:
- Update to 4.0.3

Fixes two memory leaks that would build up after repeated zone
content loads.

By default the use of the syscalls recvmmsg and sendmmsg is disabled,
they give too much issues, e.g. endless loops with errors or failure to
use IPv6. They can be enabled at compile time.

Nonhosted zones get the REFUSED rcode instead of SERVFAIL. This is
copied from other authority servers, so that there is identical wire
performance. 

Checks for clean exit on stop (this could take some time if it waits
for internal tasks) as well as check for clean-previous-exit on
startup and rebuilds nsd.db if needed.

Generated with FreeBSD Port Tools 1.00.2014.03.03 (mode: update, diff: SVN)
>How-To-Repeat:
>Fix:

--- nsd-4.0.3.patch begins here ---
Index: Makefile
===================================================================
--- Makefile	(revision 348280)
+++ Makefile	(working copy)
@@ -2,8 +2,7 @@
 # $FreeBSD$
 
 PORTNAME=	nsd
-PORTVERSION=	4.0.1
-PORTREVISION=	3
+PORTVERSION=	4.0.3
 CATEGORIES=	dns ipv6
 MASTER_SITES=	http://www.nlnetlabs.nl/downloads/nsd/	\
 		ftp://ftp.rhnet.is/pub/nsd/
@@ -45,9 +44,10 @@
 		differences.tex
 
 OPTIONS_DEFINE=		ROOT_SERVER LARGEFILE IPV6 BIND8_STATS CHECKING \
-		MINRESPSIZE NSEC3 NSEC3PREHASH MMAP MAXIPS DOCS RRL EUI_RRTYPES
+		MINRESPSIZE NSEC3 NSEC3PREHASH MMAP MAXIPS DOCS RRL EUI_RRTYPES \
+		RECVMMSG
 OPTIONS_DEFAULT=	LARGEFILE IPV6 NSEC3 NSEC3PREHASH MINRESPSIZE RRL \
-		 EUI_RRTYPES
+		EUI_RRTYPES
 
 ROOT_SERVER_DESC=	Configure as a root server
 LARGEFILE_DESC=		Largefile support
@@ -60,6 +60,7 @@
 MAXIPS_DESC=		Raise max-ips from 8 to ${NSDMAX_IPS}
 RRL_DESC=		Response Rate Limiting
 EUI_RRTYPES_DESC=	EUI48 and EUI64 RRtypes support
+RECVMMSG_DESC=		Enable use of recvmmsg and sendmmsg
 
 LIB_DEPENDS+=	libevent-1.4.so:${PORTSDIR}/devel/libevent
 
@@ -75,6 +76,7 @@
 MAXIPS_CONFIGURE_ON=		--with-max-ips=${NSDMAX_IPS}
 RRL_CONFIGURE_ENABLE=		ratelimit
 EUI_RRTYPES_CONFIGURE_ENABLE=	draft-rrtypes
+RECVMMSG_CONFIGURE_ENABLE=	enable-recvmmsg
 
 post-install:
 	${INSTALL_DATA} ${WRKSRC}/nsd.conf.sample \
Index: distinfo
===================================================================
--- distinfo	(revision 348280)
+++ distinfo	(working copy)
@@ -1,2 +1,2 @@
-SHA256 (nsd-4.0.1.tar.gz) = 45bf2adb5ceddc140eab36b8de9fa527175b77559662df1383ef22ccf097d1bd
-SIZE (nsd-4.0.1.tar.gz) = 1040758
+SHA256 (nsd-4.0.3.tar.gz) = 4bf05f2234e1b41899198aa1070f409201fc3c4980feef6567cd92c7074c4a8b
+SIZE (nsd-4.0.3.tar.gz) = 1043993
Index: files/nsd.in
===================================================================
--- files/nsd.in	(revision 348280)
+++ files/nsd.in	(working copy)
@@ -12,13 +12,15 @@
 # nsd_enable="YES"
 #
 
-: ${nsd_enable="NO"}
-
 . /etc/rc.subr
 
 name=nsd
 rcvar=nsd_enable
 
+# read settings, set default values
+load_rc_config "${name}"
+: ${nsd_enable="NO"}
+
 config=${nsd_config:=%%PREFIX%%/etc/nsd/nsd.conf}
 required_files=${config}
 pidfile=`%%PREFIX%%/sbin/nsd-checkconf -o pidfile ${config}`
--- nsd-4.0.3.patch ends here ---

>Release-Note:
>Audit-Trail:
>Unformatted: