[package - 110arm64-quarterly][x11-servers/xorg-server] Failed for xorg-server-1.17.4, 1 in build
pkg-fallout at FreeBSD.org
pkg-fallout at FreeBSD.org
Sun Sep 25 08:14:14 UTC 2016
You are receiving this mail as a port that you maintain
is failing to build on the FreeBSD package build server.
Please investigate the failure and submit a PR to fix
build.
Maintainer: x11 at FreeBSD.org
Last committer: mat at FreeBSD.org
Ident: $FreeBSD: branches/2016Q3/x11-servers/xorg-server/Makefile 416966 2016-06-16 13:23:13Z mat $
Log URL: http://thunderx1.nyi.freebsd.org/data/110arm64-quarterly/422689/logs/xorg-server-1.17.4,1.log
Build URL: http://thunderx1.nyi.freebsd.org/build.html?mastername=110arm64-quarterly&build=422689
Log:
====>> Building x11-servers/xorg-server
build started at Sun Sep 25 07:42:17 UTC 2016
port directory: /usr/ports/x11-servers/xorg-server
building for: FreeBSD 110arm64-quarterly-job-16 11.0-RELEASE FreeBSD 11.0-RELEASE r306211 arm64
maintained by: x11 at FreeBSD.org
Makefile ident: $FreeBSD: branches/2016Q3/x11-servers/xorg-server/Makefile 416966 2016-06-16 13:23:13Z mat $
Poudriere version: 3.1.14
Host OSVERSION: 1100121
Jail OSVERSION: 1100122
!!! Jail is newer than host. (Jail: 1100122, Host: 1100121) !!!
!!! This is not supported. !!!
!!! Host kernel must be same or newer than jail. !!!
!!! Expect build failures. !!!
---Begin Environment---
SHELL=/bin/csh
UNAME_v=FreeBSD 11.0-RELEASE r306211
UNAME_r=11.0-RELEASE
BLOCKSIZE=K
MAIL=/var/mail/root
STATUS=1
OPSYS=FreeBSD
ARCH=aarch64
SAVED_TERM=
MASTERMNT=/usr/local/poudriere/data/.m/110arm64-quarterly/ref
UID=0
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin
_JAVA_VERSION_LIST_REGEXP=1.6\|1.7\|1.8\|1.6+\|1.7+\|1.8+
POUDRIERE_BUILD_TYPE=bulk
PKGNAME=xorg-server-1.17.4,1
OSREL=11.0
_OSRELEASE=11.0-RELEASE
PYTHONBASE=/usr/local
OLDPWD=/
_SMP_CPUS=48
PWD=/usr/local/poudriere/data/.m/110arm64-quarterly/ref/.p/pool
MASTERNAME=110arm64-quarterly
SCRIPTPREFIX=/usr/local/share/poudriere
_JAVA_VENDOR_LIST_REGEXP=openjdk\|oracle\|sun
USER=root
HOME=/root
POUDRIERE_VERSION=3.1.14
SCRIPTPATH=/usr/local/share/poudriere/bulk.sh
CONFIGURE_MAX_CMD_LEN=262144
LIBEXECPREFIX=/usr/local/libexec/poudriere
LOCALBASE=/usr/local
PACKAGE_BUILDING=yes
_JAVA_OS_LIST_REGEXP=native\|linux
OSVERSION=1100122
---End Environment---
---Begin OPTIONS List---
===> The following configuration options are available for xorg-server-1.17.4,1:
SUID=on: Install the Xorg server with setuid bit set
====> Options available for the radio CONF: you can only select none or one of them
HAL=off: Compile with HAL config support
DEVD=on: Use devd for autoconfiguration of input devices
===> Use 'make config' to modify these settings
---End OPTIONS List---
--CONFIGURE_ARGS--
--disable-dmx --disable-xvfb --disable-xnest --without-xmlto --disable-docs --disable-devel-docs --localstatedir=/var --without-dtrace --disable-xephyr --enable-record=yes --disable-dri3 --disable-xwayland --enable-glamor --with-xkb-path=/usr/local/share/X11/xkb --with-fontrootdir=/usr/local/share/fonts --enable-config-hal=no --disable-install-setuid --x-libraries=/usr/local/lib --x-includes=/usr/local/include --prefix=/usr/local ${_LATE_CONFIGURE_ARGS}
--End CONFIGURE_ARGS--
--CONFIGURE_ENV--
SHA1_LIB="-L/usr/lib -lcrypto" SHA1_CFLAGS="-I/usr/include" XDG_DATA_HOME=/wrkdirs/usr/ports/x11-servers/xorg-server/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/x11-servers/xorg-server/work HOME=/wrkdirs/usr/ports/x11-servers/xorg-server/work TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144
--End CONFIGURE_ENV--
--MAKE_ENV--
OPENSSLBASE=/usr OPENSSLDIR=/etc/ssl OPENSSLINC=/usr/include OPENSSLLIB=/usr/lib XDG_DATA_HOME=/wrkdirs/usr/ports/x11-servers/xorg-server/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/x11-servers/xorg-server/work HOME=/wrkdirs/usr/ports/x11-servers/xorg-server/work TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" CC="cc" CFLAGS="-O2 -pipe -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS=" " LIBS="" CXX="c++" CXXFLAGS="-O2 -pipe -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444"
--End MAKE_ENV--
--PLIST_SUB--
SUID=""
NO_SUID="@comment
"
HAL="@comment
"
NO_HAL=""
DEVD=""
NO_DEVD="@comment
"
SPARC64="@comment
"
OSREL=11.0
PREFIX=%D
LOCALBASE=/usr/local
RESETPREFIX=/usr/local
PORTDOCS=""
PORTEXAMPLES=""
LIB32DIR=lib
PERL_VERSION=5.20.3
PERL_VER=5.20
PERL5_MAN1=lib/perl5/site_perl/man/man1
PERL5_MAN3=lib/perl5/site_perl/man/man3
SITE_PERL=lib/perl5/site_perl
SITE_ARCH=lib/perl5/site_perl/mach/5.20
DOCSDIR="share/doc/xorg-server"
EXAMPLESDIR="share/examples/xorg-server"
DATADIR="share/xorg-server"
WWWDIR="www/xorg-server"
ETCDIR="etc/xorg-server"
--End PLIST_SUB--
--SUB_LIST--
SUID=""
NO_SUID="@comment
"
HAL="@comment
"
NO_HAL=""
DEVD=""
NO_DEVD="@comment
"
PREFIX=/usr/local
LOCALBASE=/usr/local
DATADIR=/usr/local/share/xorg-server
DOCSDIR=/usr/local/share/doc/xorg-server
EXAMPLESDIR=/usr/local/share/examples/xorg-server
WWWDIR=/usr/local/www/xorg-server
ETCDIR=/usr/local/etc/xorg-server
--End SUB_LIST--
---Begin make.conf---
USE_PACKAGE_DEPENDS=yes
BATCH=yes
WRKDIRPREFIX=/wrkdirs
PORTSDIR=/usr/ports
PACKAGES=/packages
DISTDIR=/distfiles
#### /usr/local/etc/poudriere.d/make.conf ####
# XXX: We really need this but cannot use it while 'make checksum' does not
# try the next mirror on checksum failure. It currently retries the same
# failed mirror and then fails rather then trying another. It *does*
# try the next if the size is mismatched though.
#MASTER_SITE_FREEBSD=yes
DISABLE_MAKE_JOBS=poudriere
---End make.conf---
=======================<phase: check-sanity >============================
By default, the X Server installs as a set-user-id root binary. When run by
a normal user, it checks arguments and environment as done in the x11/wrapper
port before handling them normally. If you are concerned about the security
of this, but still want to run an X Server (for example using xdm/kdm/gdm,
which will still run the server as root), you can cancel the build and set
xorg-server_UNSET=SUID in /etc/make.conf.
===> License MIT accepted by the user
===========================================================================
=======================<phase: pkg-depends >============================
===> xorg-server-1.17.4,1 depends on file: /usr/local/sbin/pkg - not found
===> Installing existing package /packages/All/pkg-1.8.7_1.txz
[110arm64-quarterly-job-16] Installing pkg-1.8.7_1...
[110arm64-quarterly-job-16] Extracting pkg-1.8.7_1: .......... done
===> xorg-server-1.17.4,1 depends on file: /usr/local/sbin/pkg - found
===> Returning to build of xorg-server-1.17.4,1
===========================================================================
=======================<phase: fetch-depends >============================
===========================================================================
=======================<phase: fetch >============================
By default, the X Server installs as a set-user-id root binary. When run by
a normal user, it checks arguments and environment as done in the x11/wrapper
port before handling them normally. If you are concerned about the security
of this, but still want to run an X Server (for example using xdm/kdm/gdm,
which will still run the server as root), you can cancel the build and set
xorg-server_UNSET=SUID in /etc/make.conf.
===> License MIT accepted by the user
===> Fetching all distfiles required by xorg-server-1.17.4,1 for building
===========================================================================
=======================<phase: checksum >============================
By default, the X Server installs as a set-user-id root binary. When run by
a normal user, it checks arguments and environment as done in the x11/wrapper
port before handling them normally. If you are concerned about the security
of this, but still want to run an X Server (for example using xdm/kdm/gdm,
which will still run the server as root), you can cancel the build and set
xorg-server_UNSET=SUID in /etc/make.conf.
===> License MIT accepted by the user
===> Fetching all distfiles required by xorg-server-1.17.4,1 for building
=> SHA256 Checksum OK for xorg/xserver/xorg-server-1.17.4.tar.bz2.
===========================================================================
=======================<phase: extract-depends>============================
===========================================================================
=======================<phase: extract >============================
By default, the X Server installs as a set-user-id root binary. When run by
a normal user, it checks arguments and environment as done in the x11/wrapper
port before handling them normally. If you are concerned about the security
of this, but still want to run an X Server (for example using xdm/kdm/gdm,
which will still run the server as root), you can cancel the build and set
xorg-server_UNSET=SUID in /etc/make.conf.
===> License MIT accepted by the user
===> Fetching all distfiles required by xorg-server-1.17.4,1 for building
===> Extracting for xorg-server-1.17.4,1
=> SHA256 Checksum OK for xorg/xserver/xorg-server-1.17.4.tar.bz2.
===========================================================================
=======================<phase: patch-depends >============================
<snip>
2 warnings generated.
CC sys.lo
sys.c:69:1: warning: unused function 'ldq_u' [-Wunused-function]
ldq_u(u64 * p)
^
sys.c:95:1: warning: unused function 'stq_u' [-Wunused-function]
stq_u(u64 val, u64 * p)
^
2 warnings generated.
CCLD libx86emu.la
gmake[5]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/x86emu'
Making all in int10
gmake[5]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/int10'
CC helper_exec.lo
CC helper_mem.lo
CC xf86int10.lo
CC xf86int10module.lo
CC xf86x86emu.lo
CC generic.lo
generic.c:103:1: warning: unused function 'readIntVec' [-Wunused-function]
readIntVec(struct pci_device *dev, unsigned char *buf, int len)
^
1 warning generated.
CC x86emu.lo
In file included from x86emu.c:11:
./../x86emu/prim_ops.c:2478:9: warning: taking the absolute value of unsigned type 'x86emuu32' (aka 'unsigned int') has no effect [-Wabsolute-value]
if (abs(div) > 0xff) {
^
./../x86emu/prim_ops.c:2478:9: note: remove the call to 'abs' since unsigned values cannot be negative
if (abs(div) > 0xff) {
^~~
./../x86emu/prim_ops.c:2502:9: warning: taking the absolute value of unsigned type 'x86emuu32' (aka 'unsigned int') has no effect [-Wabsolute-value]
if (abs(div) > 0xffff) {
^
./../x86emu/prim_ops.c:2502:9: note: remove the call to 'abs' since unsigned values cannot be negative
if (abs(div) > 0xffff) {
^~~
2 warnings generated.
CCLD libint10.la
gmake[5]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/int10'
Making all in os-support
gmake[5]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/os-support'
Making all in bus
gmake[6]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/os-support/bus'
CC Pci.lo
CC bsd_pci.lo
CC nobus.lo
CCLD libbus.la
gmake[6]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/os-support/bus'
Making all in bsd
gmake[6]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/os-support/bsd'
CC posix_tty.lo
./../shared/posix_tty.c:356:38: warning: while loop has empty body [-Wempty-body]
SYSCALL(r = read(fd, buf, count));
^
./../shared/posix_tty.c:356:38: note: put the semicolon on a separate line to silence this warning
1 warning generated.
CC sigio.lo
CC vidmem.lo
CC bsd_VTsw.lo
CC bsd_init.lo
CC bsd_bell.lo
CC lnx_agp.lo
CC pm_noop.lo
CC bsd_kmod.lo
CCLD libbsd.la
gmake[6]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/os-support/bsd'
Making all in misc
gmake[6]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/os-support/misc'
CC SlowBcopy.lo
CCLD libmisc.la
gmake[6]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/os-support/misc'
gmake[6]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/os-support'
CCLD libxorgos.la
gmake[6]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/os-support'
gmake[5]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/os-support'
Making all in parser
gmake[5]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/parser'
CC Device.lo
CC Files.lo
CC Flags.lo
CC Input.lo
CC InputClass.lo
CC OutputClass.lo
CC Layout.lo
CC Module.lo
CC Video.lo
CC Monitor.lo
CC Pointer.lo
CC Screen.lo
CC Vendor.lo
CC read.lo
CC scan.lo
CC write.lo
CC DRI.lo
CC Extensions.lo
CCLD libxf86config_internal.la
gmake[5]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/parser'
Making all in ramdac
gmake[5]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/ramdac'
CC xf86RamDac.lo
CC xf86RamDacCmap.lo
CC xf86Cursor.lo
CC xf86HWCurs.lo
CC IBM.lo
CC BT.lo
CC TI.lo
CCLD libramdac.la
gmake[5]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/ramdac'
Making all in vgahw
gmake[5]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/vgahw'
CC vgaHW.lo
CC vgaHWmodule.lo
CCLD libvgahw.la
gmake[5]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/vgahw'
Making all in loader
gmake[5]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/loader'
CC loader.lo
CC loadmod.lo
CC os.lo
CCLD libloader.la
gmake[5]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/loader'
Making all in modes
gmake[5]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/modes'
CC xf86Crtc.lo
CC xf86Cursors.lo
CC xf86cvt.lo
CC xf86gtf.lo
CC xf86EdidModes.lo
CC xf86Modes.lo
CC xf86RandR12.lo
CC xf86Rotate.lo
CC xf86DiDGA.lo
CCLD libxf86modes.la
gmake[5]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/modes'
Making all in dri
gmake[5]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/dri'
CC dri.lo
CC xf86dri.lo
CCLD libdri.la
gmake[5]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/dri'
Making all in dri2
gmake[5]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/dri2'
Making all in pci_ids
gmake[6]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/dri2/pci_ids'
gmake[6]: Nothing to be done for 'all'.
gmake[6]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/dri2/pci_ids'
gmake[6]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/dri2'
CC dri2.lo
CC dri2ext.lo
CCLD libdri2.la
gmake[6]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/dri2'
gmake[5]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/dri2'
Making all in .
gmake[5]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86'
GEN sdksyms.c
CC sdksyms.o
gmake[6]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/dixmods'
CC libdixmods_la-miinitext.lo
CCLD libdixmods.la
gmake[6]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/dixmods'
gmake[6]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/i2c'
CC xf86i2c.lo
CCLD libi2c.la
gmake[6]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/i2c'
gmake[6]: Entering directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/dixmods'
CC xkbVT.lo
CC xkbPrivate.lo
CC xkbKillSrv.lo
CCLD libxorgxkb.la
gmake[6]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86/dixmods'
CCLD Xorg
sdksyms.o:(.data+0x34f8): undefined reference to `xf86EnableIO'
sdksyms.o:(.data+0x3500): undefined reference to `xf86DisableIO'
common/.libs/libcommon.a(xf86Configure.o): In function `DoConfigure':
xf86Configure.c:(.text+0x288): undefined reference to `xf86EnableIO'
common/.libs/libcommon.a(xf86Events.o): In function `xf86VTLeave':
xf86Events.c:(.text+0x938): undefined reference to `xf86DisableIO'
common/.libs/libcommon.a(xf86Events.o): In function `xf86VTEnter':
xf86Events.c:(.text+0xc40): undefined reference to `xf86EnableIO'
common/.libs/libcommon.a(xf86Init.o): In function `InitOutput':
xf86Init.c:(.text+0x124): undefined reference to `xf86EnableIO'
xf86Init.c:(.text+0x8f4): undefined reference to `xf86EnableIO'
os-support/.libs/libxorgos.a(vidmem.o): In function `xf86InitVidMem':
./../shared/vidmem.c:(.text+0x1c): undefined reference to `xf86OSInitVidMem'
cc: error: linker command failed with exit code 1 (use -v to see invocation)
gmake[5]: *** [Makefile:795: Xorg] Error 1
gmake[5]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86'
gmake[4]: *** [Makefile:844: all-recursive] Error 1
gmake[4]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86'
gmake[3]: *** [Makefile:659: all] Error 2
gmake[3]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw/xfree86'
gmake[2]: *** [Makefile:603: all-recursive] Error 1
gmake[2]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4/hw'
gmake[1]: *** [Makefile:771: all-recursive] Error 1
gmake[1]: Leaving directory '/wrkdirs/usr/ports/x11-servers/xorg-server/work/xorg-server-1.17.4'
*** Error code 1
Stop.
make: stopped in /usr/ports/x11-servers/xorg-server
More information about the freebsd-pkg-fallout
mailing list