[package - head-armv6-default][devel/eblob] Failed for eblob-0.18.2_3 in configure
pkg-fallout at FreeBSD.org
pkg-fallout at FreeBSD.org
Thu Dec 10 02:25:46 UTC 2015
You are receiving this mail as a port that you maintain
is failing to build on the FreeBSD package build server.
Please investigate the failure and submit a PR to fix
build.
Maintainer: ports at FreeBSD.org
Last committer: mat at FreeBSD.org
Ident: $FreeBSD: head/devel/eblob/Makefile 385521 2015-05-06 15:16:53Z mat $
Log URL: http://beefy8.nyi.freebsd.org/data/head-armv6-default/p403218_s291949/logs/eblob-0.18.2_3.log
Build URL: http://beefy8.nyi.freebsd.org/build.html?mastername=head-armv6-default&build=p403218_s291949
Log:
====>> Building devel/eblob
build started at Thu Dec 10 02:23:48 UTC 2015
port directory: /usr/ports/devel/eblob
building for: FreeBSD head-armv6-default-job-22 11.0-CURRENT FreeBSD 11.0-CURRENT r291949 arm
maintained by: ports at FreeBSD.org
Makefile ident: $FreeBSD: head/devel/eblob/Makefile 385521 2015-05-06 15:16:53Z mat $
Poudriere version: 3.1.10
Host OSVERSION: 1100085
Jail OSVERSION: 1100091
!!! Jail is newer than host. (Jail: 1100091, Host: 1100085) !!!
!!! This is not supported. !!!
!!! Host kernel must be same or newer than jail. !!!
!!! Expect build failures. !!!
---Begin Environment---
SHELL=/bin/csh
UNAME_p=armv6
UNAME_m=arm
ABI_FILE=/usr/lib/crt1.o
OSVERSION=1100091
UNAME_v=FreeBSD 11.0-CURRENT r291949
UNAME_r=11.0-CURRENT
BLOCKSIZE=K
MAIL=/var/mail/root
STATUS=1
SAVED_TERM=screen
QEMU_EMULATING=1
MASTERMNT=/usr/local/poudriere/data/.m/head-armv6-default/ref
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin
POUDRIERE_BUILD_TYPE=bulk
PKGNAME=eblob-0.18.2_3
OLDPWD=/
PWD=/usr/local/poudriere/data/.m/head-armv6-default/ref/.p/pool
MASTERNAME=head-armv6-default
SCRIPTPREFIX=/usr/local/share/poudriere
USER=root
HOME=/root
POUDRIERE_VERSION=3.1.10
SCRIPTPATH=/usr/local/share/poudriere/bulk.sh
LIBEXECPREFIX=/usr/local/libexec/poudriere
LOCALBASE=/usr/local
PACKAGE_BUILDING=yes
---End Environment---
---Begin OPTIONS List---
===> The following configuration options are available for eblob-0.18.2_3:
ASSERT=off: Enable debug assertions
EXAMPLES=on: Build and/or install examples
PYTHON=on: Python bindings or support
SNAPPY=on: Snappy compression library support
TESTS=on: Build tests
===> Use 'make config' to modify these settings
---End OPTIONS List---
--CONFIGURE_ARGS--
--End CONFIGURE_ARGS--
--CONFIGURE_ENV--
PYTHON="/usr/local/bin/python2.7" XDG_DATA_HOME=/wrkdirs/usr/ports/devel/eblob/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/devel/eblob/work HOME=/wrkdirs/usr/ports/devel/eblob/work TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh
--End CONFIGURE_ENV--
--MAKE_ENV--
XDG_DATA_HOME=/wrkdirs/usr/ports/devel/eblob/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/devel/eblob/work HOME=/wrkdirs/usr/ports/devel/eblob/work TMPDIR="/tmp" NO_PIE=yes SHELL=/bin/sh NO_LINT=YES PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" CC="/nxb-bin/usr/bin/cc" CFLAGS="-O2 -pipe -mfloat-abi=softfp -fno-strict-aliasing" CPP="/nxb-bin/usr/bin/cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="/nxb-bin/usr/bin/c++" CXXFLAGS="-O2 -pipe -mfloat-abi=softfp -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444"
--End MAKE_ENV--
--PLIST_SUB--
PYTHON=""
PYTHON_VER=2.7
EXAMPLES=""
CMAKE_BUILD_TYPE="release"
PYTHON_INCLUDEDIR=include/python2.7
PYTHON_LIBDIR=lib/python2.7
PYTHON_PLATFORM=freebsd11
PYTHON_SITELIBDIR=lib/python2.7/site-packages
PYTHON_VERSION=python2.7
PYTHON_VER=2.7
OSREL=11.0
PREFIX=%D
LOCALBASE=/usr/local
RESETPREFIX=/usr/local
PORTDOCS=""
PORTEXAMPLES=""
LIB32DIR=lib
DOCSDIR="share/doc/eblob"
EXAMPLESDIR="share/examples/eblob"
DATADIR="share/eblob"
WWWDIR="www/eblob"
ETCDIR="etc/eblob"
--End PLIST_SUB--
--SUB_LIST--
PREFIX=/usr/local
LOCALBASE=/usr/local
DATADIR=/usr/local/share/eblob
DOCSDIR=/usr/local/share/doc/eblob
EXAMPLESDIR=/usr/local/share/examples/eblob
WWWDIR=/usr/local/www/eblob
ETCDIR=/usr/local/etc/eblob
--End SUB_LIST--
---Begin make.conf---
CC=/nxb-bin/usr/bin/cc
CPP=/nxb-bin/usr/bin/cpp
CXX=/nxb-bin/usr/bin/c++
AS=/nxb-bin/usr/bin/as
NM=/nxb-bin/usr/bin/nm
LD=/nxb-bin/usr/bin/ld
OBJCOPY=/nxb-bin/usr/bin/objcopy
SIZE=/nxb-bin/usr/bin/size
STRIPBIN=/nxb-bin/usr/bin/strip
SED=/nxb-bin/usr/bin/sed
READELF=/nxb-bin/usr/bin/readelf
RANLIB=/nxb-bin/usr/bin/ranlib
YACC=/nxb-bin/usr/bin/yacc
NM=/nxb-bin/usr/bin/nm
MAKE=/nxb-bin/usr/bin/make
STRINGS=/nxb-bin/usr/bin/strings
AWK=/nxb-bin/usr/bin/awk
FLEX=/nxb-bin/usr/bin/flex
CC=/nxb-bin/usr/bin/cc
CPP=/nxb-bin/usr/bin/cpp
CXX=/nxb-bin/usr/bin/c++
AS=/nxb-bin/usr/bin/as
NM=/nxb-bin/usr/bin/nm
LD=/nxb-bin/usr/bin/ld
OBJCOPY=/nxb-bin/usr/bin/objcopy
SIZE=/nxb-bin/usr/bin/size
STRIPBIN=/nxb-bin/usr/bin/strip
SED=/nxb-bin/usr/bin/sed
READELF=/nxb-bin/usr/bin/readelf
RANLIB=/nxb-bin/usr/bin/ranlib
YACC=/nxb-bin/usr/bin/yacc
NM=/nxb-bin/usr/bin/nm
MAKE=/nxb-bin/usr/bin/make
STRINGS=/nxb-bin/usr/bin/strings
AWK=/nxb-bin/usr/bin/awk
FLEX=/nxb-bin/usr/bin/flex
CC=/nxb-bin/usr/bin/cc
CPP=/nxb-bin/usr/bin/cpp
CXX=/nxb-bin/usr/bin/c++
AS=/nxb-bin/usr/bin/as
NM=/nxb-bin/usr/bin/nm
LD=/nxb-bin/usr/bin/ld
OBJCOPY=/nxb-bin/usr/bin/objcopy
SIZE=/nxb-bin/usr/bin/size
STRIPBIN=/nxb-bin/usr/bin/strip
SED=/nxb-bin/usr/bin/sed
READELF=/nxb-bin/usr/bin/readelf
RANLIB=/nxb-bin/usr/bin/ranlib
YACC=/nxb-bin/usr/bin/yacc
NM=/nxb-bin/usr/bin/nm
MAKE=/nxb-bin/usr/bin/make
STRINGS=/nxb-bin/usr/bin/strings
AWK=/nxb-bin/usr/bin/awk
FLEX=/nxb-bin/usr/bin/flex
CC=/nxb-bin/usr/bin/cc
CPP=/nxb-bin/usr/bin/cpp
CXX=/nxb-bin/usr/bin/c++
AS=/nxb-bin/usr/bin/as
NM=/nxb-bin/usr/bin/nm
LD=/nxb-bin/usr/bin/ld
OBJCOPY=/nxb-bin/usr/bin/objcopy
SIZE=/nxb-bin/usr/bin/size
STRIPBIN=/nxb-bin/usr/bin/strip
SED=/nxb-bin/usr/bin/sed
READELF=/nxb-bin/usr/bin/readelf
RANLIB=/nxb-bin/usr/bin/ranlib
YACC=/nxb-bin/usr/bin/yacc
NM=/nxb-bin/usr/bin/nm
MAKE=/nxb-bin/usr/bin/make
STRINGS=/nxb-bin/usr/bin/strings
AWK=/nxb-bin/usr/bin/awk
FLEX=/nxb-bin/usr/bin/flex
CC=/nxb-bin/usr/bin/cc
CPP=/nxb-bin/usr/bin/cpp
CXX=/nxb-bin/usr/bin/c++
AS=/nxb-bin/usr/bin/as
NM=/nxb-bin/usr/bin/nm
LD=/nxb-bin/usr/bin/ld
OBJCOPY=/nxb-bin/usr/bin/objcopy
SIZE=/nxb-bin/usr/bin/size
STRIPBIN=/nxb-bin/usr/bin/strip
SED=/nxb-bin/usr/bin/sed
READELF=/nxb-bin/usr/bin/readelf
RANLIB=/nxb-bin/usr/bin/ranlib
YACC=/nxb-bin/usr/bin/yacc
NM=/nxb-bin/usr/bin/nm
MAKE=/nxb-bin/usr/bin/make
STRINGS=/nxb-bin/usr/bin/strings
AWK=/nxb-bin/usr/bin/awk
FLEX=/nxb-bin/usr/bin/flex
CC=/nxb-bin/usr/bin/cc
<snip>
===> Fetching all distfiles required by eblob-0.18.2_3 for building
===========================================================================
=======================<phase: checksum >============================
===> License GPLv2 accepted by the user
===> Fetching all distfiles required by eblob-0.18.2_3 for building
=> SHA256 Checksum OK for zloidemon-eblob-0.18.2-0a75b89_GH0.tar.gz.
===========================================================================
=======================<phase: extract-depends>============================
===========================================================================
=======================<phase: extract >============================
===> License GPLv2 accepted by the user
===> Fetching all distfiles required by eblob-0.18.2_3 for building
===> Extracting for eblob-0.18.2_3
=> SHA256 Checksum OK for zloidemon-eblob-0.18.2-0a75b89_GH0.tar.gz.
===========================================================================
=======================<phase: patch-depends >============================
===========================================================================
=======================<phase: patch >============================
===> Patching for eblob-0.18.2_3
===========================================================================
=======================<phase: build-depends >============================
===> eblob-0.18.2_3 depends on file: /usr/local/bin/cmake - not found
===> Installing existing package /packages/All/cmake-3.4.1.txz
[head-armv6-default-job-22] Installing cmake-3.4.1...
[head-armv6-default-job-22] `-- Installing expat-2.1.0_3...
[head-armv6-default-job-22] `-- Extracting expat-2.1.0_3: .......... done
[head-armv6-default-job-22] `-- Installing cmake-modules-3.4.1...
[head-armv6-default-job-22] `-- Extracting cmake-modules-3.4.1: .......... done
[head-armv6-default-job-22] `-- Installing curl-7.46.0_1...
[head-armv6-default-job-22] | `-- Installing ca_root_nss-3.20.1...
[head-armv6-default-job-22] | `-- Extracting ca_root_nss-3.20.1: ....... done
[head-armv6-default-job-22] `-- Extracting curl-7.46.0_1: .......... done
[head-armv6-default-job-22] `-- Installing libarchive-3.1.2_4,1...
[head-armv6-default-job-22] | `-- Installing lzo2-2.09...
[head-armv6-default-job-22] | `-- Extracting lzo2-2.09: .......... done
[head-armv6-default-job-22] `-- Extracting libarchive-3.1.2_4,1: .......... done
[head-armv6-default-job-22] `-- Installing jsoncpp-0.6.0.r2_2...
[head-armv6-default-job-22] `-- Extracting jsoncpp-0.6.0.r2_2: .......... done
[head-armv6-default-job-22] Extracting cmake-3.4.1: .......... done
Message from ca_root_nss-3.20.1:
********************************* WARNING *********************************
FreeBSD does not, and can not warrant that the certification authorities
whose certificates are included in this package have in any way been
audited for trustworthiness or RFC 3647 compliance.
Assessment and verification of trust is the complete responsibility of the
system administrator.
*********************************** NOTE **********************************
This package installs symlinks to support root certificates discovery by
default for software that uses OpenSSL.
This enables SSL Certificate Verification by client software without manual
intervention.
If you prefer to do this manually, replace the following symlinks with
either an empty file or your site-local certificate bundle.
* /etc/ssl/cert.pem
* /usr/local/etc/ssl/cert.pem
* /usr/local/openssl/cert.pem
***************************************************************************
===> eblob-0.18.2_3 depends on file: /usr/local/bin/cmake - found
===> Returning to build of eblob-0.18.2_3
===> eblob-0.18.2_3 depends on file: /usr/local/bin/python2.7 - not found
===> Installing existing package /packages/All/python27-2.7.10_1.txz
[head-armv6-default-job-22] Installing python27-2.7.10_1...
[head-armv6-default-job-22] `-- Installing libffi-3.2.1...
[head-armv6-default-job-22] | `-- Installing indexinfo-0.2.4...
[head-armv6-default-job-22] | `-- Extracting indexinfo-0.2.4: .... done
[head-armv6-default-job-22] `-- Extracting libffi-3.2.1: .......... done
[head-armv6-default-job-22] `-- Installing gettext-runtime-0.19.6...
[head-armv6-default-job-22] `-- Extracting gettext-runtime-0.19.6: .......... done
[head-armv6-default-job-22] `-- Installing readline-6.3.8...
[head-armv6-default-job-22] `-- Extracting readline-6.3.8: .......... done
[head-armv6-default-job-22] Extracting python27-2.7.10_1: .......... done
Message from python27-2.7.10_1:
===========================================================================
Note that some standard Python modules are provided as separate ports
as they require additional dependencies. They are available as:
bsddb databases/py-bsddb
gdbm databases/py-gdbm
sqlite3 databases/py-sqlite3
tkinter x11-toolkits/py-tkinter
===========================================================================
===> eblob-0.18.2_3 depends on file: /usr/local/bin/python2.7 - found
===> Returning to build of eblob-0.18.2_3
===========================================================================
=======================<phase: lib-depends >============================
===> eblob-0.18.2_3 depends on shared library: libboost_iostreams.so - not found
===> Installing existing package /packages/All/boost-libs-1.55.0_9.txz
[head-armv6-default-job-22] Installing boost-libs-1.55.0_9...
[head-armv6-default-job-22] `-- Installing icu-55.1...
[head-armv6-default-job-22] `-- Extracting icu-55.1: .......... done
[head-armv6-default-job-22] Extracting boost-libs-1.55.0_9: .......... done
Message from boost-libs-1.55.0_9:
You have built the Boost library with thread support.
Don't forget to add -pthread to your linker options when
linking your code.
===> eblob-0.18.2_3 depends on shared library: libboost_iostreams.so - found (/usr/local/lib/libboost_iostreams.so)
===> Returning to build of eblob-0.18.2_3
===> eblob-0.18.2_3 depends on shared library: libboost_python.so - not found
===> Installing existing package /packages/All/boost-python-libs-1.55.0.txz
[head-armv6-default-job-22] Installing boost-python-libs-1.55.0...
[head-armv6-default-job-22] Extracting boost-python-libs-1.55.0: .... done
Message from boost-python-libs-1.55.0:
You have built the Boost library with thread support.
Don't forget to add -pthread to your linker options when
linking your code.
You have built the Boost.Python library. You have to add the following
options when building your own code:
Compiler options:
-I/usr/local/include/python2.7 -I/usr/local/include
Linker options:
-L/usr/local/lib/python2.7 -L/usr/local/lib -lboost_python -lpython2.7
===> eblob-0.18.2_3 depends on shared library: libboost_python.so - found (/usr/local/lib/libboost_python.so)
===> Returning to build of eblob-0.18.2_3
===> eblob-0.18.2_3 depends on shared library: libsnappy.so - not found
===> Installing existing package /packages/All/snappy-1.1.3.txz
[head-armv6-default-job-22] Installing snappy-1.1.3...
[head-armv6-default-job-22] Extracting snappy-1.1.3: .......... done
===> eblob-0.18.2_3 depends on shared library: libsnappy.so - found (/usr/local/lib/libsnappy.so)
===> Returning to build of eblob-0.18.2_3
===========================================================================
=======================<phase: configure >============================
===> Configuring for eblob-0.18.2_3
===> Performing in-source build
/bin/mkdir -p /wrkdirs/usr/ports/devel/eblob/work/eblob-0a75b89
-- The C compiler identification is Clang 3.7.0
-- The CXX compiler identification is Clang 3.7.0
-- Check for working C compiler: /nxb-bin/usr/bin/cc
-- Check for working C compiler: /nxb-bin/usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /nxb-bin/usr/bin/c++
-- Check for working CXX compiler: /nxb-bin/usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Performing Test HAVE_SYNC_ATOMIC_SUPPORT
-- Performing Test HAVE_SYNC_ATOMIC_SUPPORT - Success
-- __sync support: 1
-- Asserts are: OFF
-- Check if the system is big endian
-- Searching 16 bit integer
-- Looking for sys/types.h
-- Looking for sys/types.h - found
-- Looking for stdint.h
-- Looking for stdint.h - found
-- Looking for stddef.h
-- Looking for stddef.h - found
-- Check size of unsigned short
-- Check size of unsigned short - done
-- Using unsigned short
CMake Error: Generator: execution of make failed. Make command was: "/usr/bin/make" "cmTC_67cc0/fast"
-- Check if the system is big endian - failed
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Found Threads: TRUE
-- Performing Test HAVE_PTHREAD_SPINLOCK
-- Performing Test HAVE_PTHREAD_SPINLOCK - Success
-- pthreads have spinlock
-- Boost version: 1.55.0
-- Found the following Boost libraries:
-- iostreams
-- thread
-- system
-- regex
-- python
-- Boost information:
-- Boost_INCLUDE_DIRS: /usr/local/include
-- Boost_LIBRARY_DIRS: /usr/local/lib
-- Boost_LIBRARIES: /usr/local/lib/libboost_iostreams.so;/usr/local/lib/libboost_thread.so;/usr/local/lib/libboost_system.so;/usr/local/lib/libboost_regex.so;/usr/local/lib/libboost_python.so
-- Found SNAPPY: /usr/local/lib/libsnappy.so
-- Found PythonLibs: /usr/local/lib/libpython2.7.so (found version "2.7.10")
-- Python includes are situated in (/usr/local/include/python2.7, /usr/local/include/python2.7)
-- Looking for posix_fadvise
-- Looking for posix_fadvise - found
-- Found PythonInterp: /usr/local/bin/python2.7 (found version "2.7.10")
-- Configuring incomplete, errors occurred!
See also "/wrkdirs/usr/ports/devel/eblob/work/eblob-0a75b89/CMakeFiles/CMakeOutput.log".
See also "/wrkdirs/usr/ports/devel/eblob/work/eblob-0a75b89/CMakeFiles/CMakeError.log".
*** Error code 1
Stop.
make: stopped in /usr/ports/devel/eblob
More information about the freebsd-pkg-fallout
mailing list