[REL - head-i386-default][sysutils/nut] Failed for nut-2.6.5_1 in configure
pkg-fallout at FreeBSD.org
pkg-fallout at FreeBSD.org
Fri Nov 22 01:51:36 UTC 2013
You are receiving this mail as a port that you maintain
is failing to build on the FreeBSD package build server.
Please investigate the failure and submit a PR to fix
build.
Maintainer: itetcu at FreeBSD.org
Last committer: bapt at FreeBSD.org
Ident: $FreeBSD: head/sysutils/nut/Makefile 327772 2013-09-20 23:05:58Z bapt $
Log URL: http://beefy1.isc.freebsd.org/bulk/head-i386-default/2013-11-21_12h33m28s/logs/nut-2.6.5_1.log
Build URL: http://beefy1.isc.freebsd.org/bulk/head-i386-default/2013-11-21_12h33m28s
Log:
====>> Building sysutils/nut
build started at Fri Nov 22 01:51:17 UTC 2013
port directory: /usr/ports/sysutils/nut
building for: FreeBSD head-i386-default-job-10 11.0-CURRENT FreeBSD 11.0-CURRENT r256430 i386
maintained by: itetcu at FreeBSD.org
Makefile ident: $FreeBSD: head/sysutils/nut/Makefile 327772 2013-09-20 23:05:58Z bapt $
Poudriere version: 3.1-pre
---Begin Environment---
UNAME_m=i386
UNAME_p=i386
OSVERSION=1100000
UNAME_v=FreeBSD 11.0-CURRENT r256430
UNAME_r=11.0-CURRENT
BLOCKSIZE=K
MAIL=/var/mail/root
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/root/bin
STATUS=1
MASTERMNT=/usr/local/poudriere/data/build/head-i386-default/ref
PKG_EXT=txz
tpid=36329
POUDRIERE_BUILD_TYPE=bulk
PKGNG=1
PKGNAME=nut-2.6.5_1
PKG_DELETE=/usr/local/sbin/pkg-static delete -y -f
PKG_ADD=/usr/local/sbin/pkg-static add
PWD=/root
MASTERNAME=head-i386-default
USER=root
HOME=/root
POUDRIERE_VERSION=3.1-pre
LOCALBASE=/usr/local
PACKAGE_BUILDING=yes
PKG_VERSION=/poudriere/pkg-static version
PKG_BIN=/usr/local/sbin/pkg-static
---End Environment---
---Begin OPTIONS List---
===> The following configuration options are available for nut-2.6.5_1:
BASH=off: Bash Completion support
CGI=off: Web CGI interface
HAL=off: HAL (Hardware Abstraction Layer) support
NEON=on: NEON XML/HTTP support
PDU=off: Powerman PDU support
SERIAL=on: SERIAL support
SNMP=on: SNMP support
USB=on: USB support
===> Use 'make config' to modify these settings
---End OPTIONS List---
--CONFIGURE_ARGS--
--sysconfdir=/usr/local/etc/nut --program-transform-name="" --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=uucp --with-group=uucp --with-dev --without-cgi --with-serial --with-usb=auto --with-snmp --with-neonxml --without-powerman --without-hal --prefix=/usr/local ${_LATE_CONFIGURE_ARGS}
--End CONFIGURE_ARGS--
--CONFIGURE_ENV--
TMPDIR="/tmp" TMPDIR="/tmp" MAKE=gmake PKG_CONFIG=pkgconf SHELL=/bin/sh CONFIG_SHELL=/bin/sh AUTOCONF=/usr/local/bin/autoconf-2.69 AUTOCONF_DIR=/usr/local/share/autoconf-2.69 AUTOHEADER=/usr/local/bin/autoheader-2.69 AUTOIFNAMES=/usr/local/bin/ifnames-2.69 AUTOM4TE=/usr/local/bin/autom4te-2.69 AUTORECONF=/usr/local/bin/autoreconf-2.69 AUTOSCAN=/usr/local/bin/autoscan-2.69 AUTOUPDATE=/usr/local/bin/autoupdate-2.69 AUTOCONF_VERSION=2.69 CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144
--End CONFIGURE_ENV--
--MAKE_ENV--
TMPDIR="/tmp" TMPDIR="/tmp" SHELL=/bin/sh NO_LINT=YES AUTOCONF=/usr/local/bin/autoconf-2.69 AUTOCONF_DIR=/usr/local/share/autoconf-2.69 AUTOHEADER=/usr/local/bin/autoheader-2.69 AUTOIFNAMES=/usr/local/bin/ifnames-2.69 AUTOM4TE=/usr/local/bin/autom4te-2.69 AUTORECONF=/usr/local/bin/autoreconf-2.69 AUTOSCAN=/usr/local/bin/autoscan-2.69 AUTOUPDATE=/usr/local/bin/autoupdate-2.69 AUTOCONF_VERSION=2.69 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" CC="cc" CFLAGS="-O2 -pipe -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" CXX="c++" CXXFLAGS="-O2 -pipe -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -o root -g wheel -m 555" BSD_INSTALL_LIB="install -s -o root -g wheel -m 444" BSD_INSTALL_SCRIPT="install -o root -g wheel -m 555" BSD_INSTALL_DATA="install -o root -g wheel -m 444" BSD_INSTALL_MAN="install -o root -g wheel -m 444"
--End MAKE_ENV--
--SUB_LIST--
STATEDIR=/var/db/nut
PREFIX=/usr/local
LOCALBASE=/usr/local
DATADIR=/usr/local/share/nut
DOCSDIR=/usr/local/share/doc/nut
EXAMPLESDIR=/usr/local/share/examples/nut
WWWDIR=/usr/local/www/nut
ETCDIR=/usr/local/etc/nut
--End SUB_LIST--
---Begin make.conf---
ARCH=i386
MACHINE=i386
MACHINE_ARCH=i386
USE_PACKAGE_DEPENDS=yes
BATCH=yes
WRKDIRPREFIX=/wrkdirs
PORTSDIR=/usr/ports
PACKAGES=/packages
DISTDIR=/distfiles
#### /usr/local/etc/poudriere.d/make.conf ####
WITH_PKGNG=yes
NO_RESTRICTED=yes
DISABLE_MAKE_JOBS=poudriere
---End make.conf---
===> Cleaning for nut-2.6.5_1
=======================<phase: check-config >============================
===========================================================================
=======================<phase: pkg-depends >============================
===> nut-2.6.5_1 depends on file: /usr/local/sbin/pkg - not found
===> Verifying install for /usr/local/sbin/pkg in /usr/ports/ports-mgmt/pkg
===> Installing existing package /packages/All/pkg-1.1.4_10.txz
Installing pkg-1.1.4_10... done
If you are upgrading from the old package format, first run:
# pkg2ng
===> Returning to build of nut-2.6.5_1
===========================================================================
=======================<phase: fetch-depends >============================
===========================================================================
=======================<phase: fetch >============================
===> Fetching all distfiles required by nut-2.6.5_1 for building
===========================================================================
=======================<phase: checksum >============================
===> Fetching all distfiles required by nut-2.6.5_1 for building
=> SHA256 Checksum OK for nut-2.6.5.tar.gz.
=> SHA256 Checksum OK for nut-2.6.5.tar.gz.sig.
===========================================================================
=======================<phase: extract-depends>============================
===========================================================================
=======================<phase: extract >============================
===> Fetching all distfiles required by nut-2.6.5_1 for building
===> Extracting for nut-2.6.5_1
=> SHA256 Checksum OK for nut-2.6.5.tar.gz.
=> SHA256 Checksum OK for nut-2.6.5.tar.gz.sig.
===========================================================================
=======================<phase: patch-depends >============================
===========================================================================
=======================<phase: patch >============================
===> Patching for nut-2.6.5_1
===> Applying FreeBSD patches for nut-2.6.5_1
===========================================================================
=======================<phase: build-depends >============================
===> nut-2.6.5_1 depends on executable: gmake - not found
===> Verifying install for gmake in /usr/ports/devel/gmake
===> Installing existing package /packages/All/gmake-3.82_1.txz
Installing gmake-3.82_1...Installing gettext-0.18.3.1... done
done
===> Returning to build of nut-2.6.5_1
===> nut-2.6.5_1 depends on executable: pkgconf - not found
===> Verifying install for pkgconf in /usr/ports/devel/pkgconf
===> Installing existing package /packages/All/pkgconf-0.9.3.txz
Installing pkgconf-0.9.3... done
===> Returning to build of nut-2.6.5_1
===> nut-2.6.5_1 depends on file: /usr/local/bin/autoconf-2.69 - not found
===> Verifying install for /usr/local/bin/autoconf-2.69 in /usr/ports/devel/autoconf
===> Installing existing package /packages/All/autoconf-2.69.txz
Installing autoconf-2.69...Installing autoconf-wrapper-20130530... done
Installing m4-1.4.17,1... done
Installing perl5-5.16.3_3...Removing /usr/local/etc/perl5_version... Done.
Creating /usr/local/etc/perl5_version... Done.
Removing stale symlinks from /usr/bin...
Skipping /usr/bin/perl
Skipping /usr/bin/perl5
Done.
Creating various symlinks in /usr/bin...
Symlinking /usr/local/bin/perl5.16.3 to /usr/bin/perl
Symlinking /usr/local/bin/perl5.16.3 to /usr/bin/perl5
Done.
done
done
===> Returning to build of nut-2.6.5_1
===========================================================================
=======================<phase: lib-depends >============================
===> nut-2.6.5_1 depends on shared library: netsnmp.30 - not found
===> Verifying install for netsnmp.30 in /usr/ports/net-mgmt/net-snmp
===> Installing existing package /packages/All/net-snmp-5.7.2_3.txz
Installing net-snmp-5.7.2_3... done
**** This port installs snmp daemon, header files and libraries but don't
invokes snmpd by default.
If you want to invoke snmpd and/or snmptrapd at startup, put these
lines into /etc/rc.conf.
snmpd_enable="YES"
snmpd_flags="-a"
snmpd_conffile="/usr/local/share/snmp/snmpd.conf /etc/snmpd.conf"
snmptrapd_enable="YES"
snmptrapd_flags="-a -p /var/run/snmptrapd.pid"
**** You may specify the following make variables:
NET_SNMP_SYS_CONTACT="zi at FreeBSD.org"
NET_SNMP_SYS_LOCATION="USA"
DEFAULT_SNMP_VERSION=3
NET_SNMP_MIB_MODULES="host smux mibII/mta_sendmail ucd-snmp/diskio"
NET_SNMP_LOGFILE=/var/log/snmpd.log
NET_SNMP_PERSISTENTDIR=/var/net-snmp
to define default values (or overwriting defaults). At least
setting first two variables, you will not be prompted during
configuration process. You may also set
BATCH="yes"
to avoid interactive configuration.
===> Returning to build of nut-2.6.5_1
===> nut-2.6.5_1 depends on shared library: neon.27 - not found
===> Verifying install for neon.27 in /usr/ports/www/neon29
===> Installing existing package /packages/All/neon29-0.29.6_4.txz
Installing neon29-0.29.6_4...Installing expat-2.1.0... done
done
===> Returning to build of nut-2.6.5_1
===========================================================================
=======================<phase: configure >============================
===> Configuring for nut-2.6.5_1
===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/sysutils/nut/work/nut-2.6.5/m4/libtool.m4
===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/sysutils/nut/work/nut-2.6.5/aclocal.m4
===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/sysutils/nut/work/nut-2.6.5/configure
aclocal.m4:16: warning: this file was generated for autoconf 2.68.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically `autoreconf'.
configure: WARNING: unrecognized options: --with-neonxml
configure: loading site script /usr/ports/Templates/config.site
Network UPS Tools version 2.6.5
checking build system type... i386-portbld-freebsd11.0
checking host system type... i386-portbld-freebsd11.0
checking target system type... i386-portbld-freebsd11.0
checking for host system name... freebsd
checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p
checking for gawk... (cached) /usr/bin/awk
checking whether gmake sets $(MAKE)... yes
checking for autoconf macro to enable system extensions... yes
checking for style of include used by gmake... GNU
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking dependency style of cc... gcc3
checking how to run the C preprocessor... cpp
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... (cached) /usr/bin/egrep
checking for ANSI C header files... (cached) yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for memory.h... (cached) yes
checking for strings.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for unistd.h... (cached) yes
checking for minix/config.h... (cached) no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) cc
checking whether we are using the GNU C compiler... (cached) yes
checking whether cc accepts -g... (cached) yes
checking for cc option to accept ISO C89... (cached) none needed
checking dependency style of cc... (cached) gcc3
checking whether cc understands -c and -o together... yes
checking how to run the C preprocessor... cpp
checking whether we are using the GNU C++ compiler... yes
checking whether c++ accepts -g... yes
checking dependency style of c++... gcc3
checking for egrep... (cached) /usr/bin/egrep
checking for ar... /usr/bin/ar
checking for ranlib... ranlib
checking whether byte ordering is bigendian... no
checking for inline... inline
checking for flexible array members... yes
checking for variable-length arrays... yes
checking for flock... yes
checking for lockf... yes
checking for fcvt... no
checking for fcvtl... no
checking for cfsetispeed... yes
checking for tcsendbreak... yes
checking for seteuid... (cached) yes
checking for setsid... (cached) yes
checking for getpassphrase... no
checking for on_exit... no
checking for strptime... (cached) yes
checking for setlogmask... yes
checking whether LOG_UPTO is declared... yes
checking for vsnprintf... (cached) yes
checking for snprintf... (cached) yes
checking for setenv... (cached) yes
checking for strerror... (cached) yes
checking for atexit... (cached) yes
checking pkg-config is at least version 0.9.0... yes
checking for CPPUNIT... no
configure: WARNING: libcppunit not found.
checking whether optind is declared... yes
checking for getopt.h... (cached) yes
checking for getopt_long... yes
checking whether uu_lock is declared... yes
checking whether __func__ is declared... yes
checking for library containing gethostbyname... none required
checking for library containing connect... none required
checking whether time.h and sys/time.h may both be included... yes
checking for sys/modem.h... no
checking for stdarg.h... (cached) yes
checking for varargs.h... no
checking for sys/termios.h... yes
checking for sys/time.h... (cached) yes
checking for library containing pthread_create... -lpthread
checking for socklen_t... (cached) yes
checking for --with-all... not given
checking for Net-SNMP version via net-snmp-config... 5.7.2 found
checking for Net-SNMP cflags... -DNETSNMP_ENABLE_IPV6 -fno-strict-aliasing -O2 -pipe -fno-strict-aliasing -Ufreebsd11 -Dfreebsd11=freebsd11 -DAPPLLIB_EXP=/usr/local/lib/perl5/5.16/BSDPAN -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -I/usr/local/lib/perl5/5.16/mach/CORE -I/usr/include -I/usr/local/include
checking for Net-SNMP libs... -L/usr/lib -lm -lkvm -ldevstat -L/usr/local/lib -lnetsnmp -lcrypto -lelf -lssp_nonshared
checking for net-snmp/net-snmp-config.h... no
checking for init_snmp... yes
checking for libusb version via pkg-config... checking via libusb-config... none found
checking for libusb cflags...
checking for libusb ldflags... -lusb
checking for usb.h... yes
checking for usb_init... yes
checking for usb_detach_kernel_driver_np... yes
checking for libhal version via pkg-config (0.5.8 minimum required)... none found
checking for libhal cflags... -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
checking for libhal ldflags... -lhal -ldbus-1 -lpthread
checking for libhal.h... no
checking for glib.h... no
checking for dbus/dbus-glib.h... no
checking for libhal_device_new_changeset... no
checking for libneon version via pkg-config (0.25.0 minimum required)... 0.29.6 found
checking for libneon cflags... -I/usr/local/include/neon
checking for libneon ldflags... -L/usr/local/lib -lneon
checking for ne_xmlreq.h... yes
checking for ne_xml_dispatch_request... yes
checking for ne_set_connect_timeout... yes
checking for ne_sock_connect_timeout... yes
checking for libpowerman cflags...
checking for libpowerman libs...
checking for libpowerman.h... no
checking for pm_connect... no
checking for avahi-core version via pkg-config (0.6.30 minimum required)... none found
checking for avahi-client version via pkg-config (0.6.30 minimum required)... none found
checking for avahi cflags...
checking for avahi ldflags...
checking for avahi-common/malloc.h... no
checking for avahi_free... no
checking whether to build serial drivers... yes
checking whether to build USB drivers... yes
configure: error: "Net-SNMP libraries not found, required for SNMP drivers"
===> Script "configure" failed unexpectedly.
Please report the problem to itetcu at FreeBSD.org [maintainer] and attach the
"/wrkdirs/usr/ports/sysutils/nut/work/nut-2.6.5/config.log" including the
output of the failure of your make command. Also, it might be a good idea to
provide an overview of all packages installed on your system (e.g. a
/usr/local/sbin/pkg-static info -g -Ea).
*** Error code 1
Stop.
make: stopped in /usr/ports/sysutils/nut
===> Cleaning for nut-2.6.5_1
More information about the freebsd-pkg-fallout
mailing list