[RELEASE - head-default] Build failed for squid-3.2.13 during build
pkg-fallout at FreeBSD.org
pkg-fallout at FreeBSD.org
Thu Jul 25 07:43:27 UTC 2013
Maintainer: tmseck at FreeBSD.org
Last committer: delphij at FreeBSD.org
Ident: $FreeBSD: head/www/squid32/Makefile 323084 2013-07-16 00:33:53Z delphij $
Log URL: http://beefy2.isc.freebsd.org/bulk/head-default/2013-07-25_07h07m51s/logs/squid-3.2.13.log
Build URL: http://beefy2.isc.freebsd.org/bulk/head-default/2013-07-25_07h07m51s
Log:
====>> Building www/squid32
build started at Thu Jul 25 07:41:57 UTC 2013
port directory: /usr/ports/www/squid32
building for: FreeBSD head-default-job-03 10.0-CURRENT FreeBSD 10.0-CURRENT amd64
maintained by: tmseck at FreeBSD.org
Makefile ident: $FreeBSD: head/www/squid32/Makefile 323084 2013-07-16 00:33:53Z delphij $
Poudriere version: 3.1-pre
---Begin Environment---
OSVERSION=1000035
UNAME_v=FreeBSD 10.0-CURRENT
UNAME_r=10.0-CURRENT
BLOCKSIZE=K
MAIL=/var/mail/root
STATUS=1
MASTERMNT=/usr/local/poudriere/data/build/head-default/ref
PKG_EXT=txz
FORCE_PACKAGE=yes
tpid=87185
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/root/bin
POUDRIERE_BUILD_TYPE=bulk
NBPARALLEL=24
PKGNG=1
PKGNAME=squid-3.2.13
PKG_DELETE=/usr/local/sbin/pkg delete -y -f
PKG_ADD=/usr/local/sbin/pkg add
PWD=/root/poudriere
MASTERNAME=head-default
USER=root
HOME=/root
POUDRIERE_VERSION=3.1-pre
SKIPSANITY=0
LOCALBASE=/usr/local
PACKAGE_BUILDING=yes
---End Environment---
---Begin OPTIONS List---
===> The following configuration options are available for squid-3.2.13:
ARP_ACL=off: Enable ARP/MAC/EUI based authentification
AUTH_KERB=on: Install Kerberos authentication helpers
AUTH_LDAP=off: Install LDAP authentication helpers
AUTH_NIS=on: Install NIS/YP authentication helpers
AUTH_SASL=off: Install SASL authentication helpers
AUTH_SMB=off: Install SMB auth. helpers (req. Samba)
CACHE_DIGESTS=off: Use cache digests
DEBUG=off: Build with extended debugging support
DELAY_POOLS=off: Enable delay pools (bandwidth limiting)
DNS_HELPER=off: Use external dnsserver processes for DNS
DOCS=on: Build and/or install documentation
ECAP=off: Enable loadable content adaptation modules
ESI=off: Enable support for ESI
EXAMPLES=on: Build and/or install examples
FOLLOW_XFF=off: Enable support for the X-Following-For header
FS_AUFS=on: Enable AUFS (async-io) support
FS_COSS=off: Enable COSS (not stable yet)
HTCP=on: Enable HTCP support
ICAP=off: Enable the ICAP client
ICMP=off: Enable ICMP pinging and network measurement
IDENT=on: Enable Ident lookups (RFC 931)
IPV6=on: IPv6 protocol support
KQUEUE=on: Enable kqueue(2) support
LARGEFILE=off: Support large (>2GB) cache and log files
SNMP=on: Enable SNMP support
SSL=off: Enable SSL gatewaying support
SSL_CRTD=off: Use ssl_crtd to handle SSL cert requests
STACKTRACES=off: Enable automatic backtraces on fatal errors
STRICT_HTTP=off: Make Squid strictly HTTP compliant
TP_IPF=off: Enable transparent proxying with IPFilter
TP_IPFW=off: Enable transparent proxying with IPFW
TP_PF=off: Enable transparent proxying with PF
VIA_DB=off: Enable Forward/Via database
WCCP=on: Enable Web Cache Coordination Protocol
WCCPV2=on: Enable Web Cache Coordination Protocol v2
===> Use 'make config' to modify these settings
---End OPTIONS List---
--CONFIGURE_ARGS--
--with-default-user=squid --bindir=/usr/local/sbin --sbindir=/usr/local/sbin --datadir=/usr/local/etc/squid --libexecdir=/usr/local/libexec/squid --localstatedir=/var --sysconfdir=/usr/local/etc/squid --with-logdir=/var/log/squid --with-pidfile=/var/run/squid/squid.pid --with-swapdir=/var/squid/cache/squid --enable-auth --enable-build-info --enable-loadable-modules --enable-removal-policies="lru heap" --disable-epoll --disable-linux-netfilter --disable-linux-tproxy --disable-translation --enable-auth-basic="DB MSNT MSNT-multi-domain NCSA PAM POP3 RADIUS fake getpwnam NIS" --enable-auth-digest="file" --enable-external-acl-helpers="file_userip unix_group" --enable-auth-negotiate="kerberos wrapper" --enable-auth-ntlm="fake smb_lm" --enable-storeio="diskd rock ufs aufs" --enable-disk-io="AIO Blocking DiskDaemon IpcIo Mmapped DiskThreads" --enable-log-daemon-helpers="file" --enable-url-rewrite-helpers="fake" --enable-htcp --disable-forw-via-db --disable-cache-diges
ts --enable-wccp --enable-wccpv2 --disable-eui --disable-ipfw-transparent --disable-pf-transparent --disable-ipf-transparent --disable-follow-x-forwarded-for --disable-ecap --disable-icap-client --disable-esi --enable-kqueue --prefix=/usr/local ${_LATE_CONFIGURE_ARGS}
--End CONFIGURE_ARGS--
--CONFIGURE_ENV--
TMPDIR="/tmp" TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144
--End CONFIGURE_ENV--
--MAKE_ENV--
TMPDIR="/tmp" TMPDIR="/tmp" SHELL=/bin/sh NO_LINT=YES PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" CC="cc" CFLAGS="-O2 -pipe -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS=" -pthread" CXX="c++" CXXFLAGS="-O2 -pipe -fno-strict-aliasing -Wno-unused-private-field" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -o root -g wheel -m 555" BSD_INSTALL_LIB="install -s -o root -g wheel -m 444" BSD_INSTALL_SCRIPT="install -o root -g wheel -m 555" BSD_INSTALL_DATA="install -o root -g wheel -m 444" BSD_INSTALL_MAN="install -o root -g wheel -m 444"
--End MAKE_ENV--
--SUB_LIST--
PREFIX=/usr/local
LOCALBASE=/usr/local
DATADIR=/usr/local/share/squid
DOCSDIR=/usr/local/share/doc/squid
EXAMPLESDIR=/usr/local/share/examples/squid
WWWDIR=/usr/local/www/squid
ETCDIR=/usr/local/etc/squid
--End SUB_LIST--
---Begin make.conf---
USE_PACKAGE_DEPENDS=yes
BATCH=yes
WRKDIRPREFIX=/wrkdirs
PACKAGES=/packages
DISTDIR=/distfiles
#### /usr/local/etc/poudriere.d/make.conf ####
WITH_PKGNG=yes
NO_RESTRICTED=yes
DISABLE_MAKE_JOBS=yes
---End make.conf---
===> Cleaning for squid-3.2.13
=======================<phase: check-config >============================
=========================================================================
=======================<phase: pkg-depends >============================
===> squid-3.2.13 depends on file: /usr/local/sbin/pkg - not found
===> Verifying install for /usr/local/sbin/pkg in /usr/ports/ports-mgmt/pkg
===> Installing existing package /packages/All/pkg-1.1.4_1.txz
Installing pkg-1.1.4_1... done
If you are upgrading from the old package format, first run:
# pkg2ng
===> Returning to build of squid-3.2.13
=========================================================================
=======================<phase: fetch-depends >============================
=========================================================================
=======================<phase: fetch >============================
===> License GPLv2 accepted by the user
===> Fetching all distfiles required by squid-3.2.13 for building
=========================================================================
=======================<phase: checksum >============================
===> License GPLv2 accepted by the user
===> Fetching all distfiles required by squid-3.2.13 for building
=> SHA256 Checksum OK for squid3.2/squid-3.2.13.tar.bz2.
=========================================================================
=======================<phase: extract-depends>============================
===> squid-3.2.13 depends on file: /usr/local/bin/perl5.14.4 - not found
===> Verifying install for /usr/local/bin/perl5.14.4 in /usr/ports/lang/perl5.14
===> Installing existing package /packages/All/perl-5.14.4.txz
Installing perl-5.14.4...Removing stale symlinks from /usr/bin...
Skipping /usr/bin/perl
Skipping /usr/bin/perl5
Done.
Creating various symlinks in /usr/bin...
Symlinking /usr/local/bin/perl5.14.4 to /usr/bin/perl
Symlinking /usr/local/bin/perl5.14.4 to /usr/bin/perl5
Done.
Cleaning up /etc/make.conf... Done.
Spamming /etc/make.conf... Done.
done
===> Returning to build of squid-3.2.13
=========================================================================
=======================<phase: extract >============================
===> License GPLv2 accepted by the user
===> Fetching all distfiles required by squid-3.2.13 for building
===> Extracting for squid-3.2.13
=> SHA256 Checksum OK for squid3.2/squid-3.2.13.tar.bz2.
=========================================================================
=======================<phase: patch-depends >============================
===> squid-3.2.13 depends on file: /usr/local/bin/perl5.14.4 - found
=========================================================================
=======================<phase: patch >============================
===> Patching for squid-3.2.13
===> Applying distribution patches for squid-3.2.13
===> Applying FreeBSD patches for squid-3.2.13
=========================================================================
=======================<phase: build-depends >============================
===> squid-3.2.13 depends on file: /usr/local/bin/perl5.14.4 - found
=========================================================================
=======================<phase: lib-depends >============================
=========================================================================
=======================<phase: configure >============================
===> Configuring for squid-3.2.13
===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/www/squid32/work/squid-3.2.13/lib/libTrie/acinclude.m4
===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/www/squid32/work/squid-3.2.13/lib/libTrie/aclocal.m4
===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/www/squid32/work/squid-3.2.13/lib/libTrie/configure
===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/www/squid32/work/squid-3.2.13/aclocal.m4
===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/www/squid32/work/squid-3.2.13/configure
===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/www/squid32/work/squid-3.2.13/libltdl/m4/libtool.m4
===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/www/squid32/work/squid-3.2.13/libltdl/aclocal.m4
===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/www/squid32/work/squid-3.2.13/libltdl/configure
configure: loading site script /usr/ports/Templates/config.site
checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p
checking for gawk... (cached) /usr/bin/awk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... (cached) /usr/bin/tar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of cc... gcc3
checking whether cc understands -c and -o together... yes
<snip>
More information about the freebsd-pkg-fallout
mailing list