pf configuration de Argentina

[gus]

Gilberto Villani Brito wrote:

>Gus,
>I already had this doubt.
>Try use:
>pass in on $int_if from $uext1 to any queue uext1_in
>
>PS: This cup is owned by Brazil.
>
Gilberto

Sorry for the win of world cup...(Argentina)

but now the problem is  pf....
I had change the line but , when triet of connect my machine 
168.96.200.196 ...to 6K....
These not see these band , and so access to 100 K....

Any idea!!!!

Abracos
Gus

=======================================

ext_if="xl0"    # replace with actual external interface name i.e., dc0
int_if="xl1"    # replace with actual internal interface name i.e., dc1
internal_net="168.96.200.0/24"
#external_addr="168.96.200.1"

#Tables: similar to macros, but more flexible for many addresses.
#table <foo> { 10.0.0.0/8, !10.1.0.0/16, 192.168.0.0/24, 192.168.1.18 }

# Options: tune the behavior of pf, default values are given.
#set timeout { interval 10, frag 30 }
#set timeout { tcp.first 120, tcp.opening 30, tcp.established 86400 }
#set timeout { tcp.closing 900, tcp.finwait 45, tcp.closed 90 }
#set timeout { udp.first 60, udp.single 30, udp.multiple 60 }
#set timeout { icmp.first 20, icmp.error 10 }
#set timeout { other.first 60, other.single 30, other.multiple 60 }
#set timeout { adaptive.start 0, adaptive.end 0 }
#set limit { states 10000, frags 5000 }
#set loginterface none
#set optimization normal
#set block-policy drop
#set require-order yes
#set fingerprints "/etc/pf.os"

# Normalization: reassemble fragments and resolve or reduce traffic 
ambiguities.
#scrub in all

# Queueing: rule-based bandwidth control.
#altq on $ext_if bandwidth 2Mb cbq queue { dflt, developers, marketing }
#queue dflt bandwidth 5% cbq(default)
#queue developers bandwidth 80%
#queue marketing  bandwidth 15%

table <lan> { 168.96.200.87, 168.96.200.8, 168.96.200.55, 168.96.200.196 }

set loginterface $int_if
set fingerprints "/etc/pf.os"

altq on $int_if bandwidth 100Mb cbq queue { dflt_in, uext1_in }
altq on $ext_if bandwidth 600Kb cbq queue { dflt_out }

queue dflt_in cbq (default) bandwidth 60%
queue dflt_out cbq (default)

queue uext1_in bandwidth 6Kb

uext1="168.96.200.196"

nat on $ext_if from <lan> to any -> ($ext_if)

pass in on $int_if from $uext1 to any queue uext1_in

# Translation: specify how addresses are to be mapped or redirected.
# nat: packets going out through $ext_if with source address 
$internal_net will
# get translated as coming from the address of $ext_if, a state is 
created for
# such packets, and incoming packets will be redirected to the internal 
address.
#nat on $ext_if from $internal_net to any -> ($ext_if)

# rdr: packets coming in on $ext_if with destination $external_addr:1234 
will
# be redirected to 10.1.1.1:5678. A state is created for such packets, and
# outgoing packets will be translated as coming from the external address.
#rdr on $ext_if proto tcp from any to $external_addr/32 port 1234 -> 
10.1.1.1 port 5678

# rdr outgoing FTP requests to the ftp-proxy
#rdr on $int_if proto tcp from any to any port ftp -> 127.0.0.1 port 8021

# spamd-setup puts addresses to be redirected into table <spamd>.
#table <spamd> persist
#no rdr on { lo0, lo1 } from any to any
#rdr inet proto tcp from <spamd> to any port smtp -> 127.0.0.1 port 8025

# Filtering: the implicit first two rules are
#pass in all
#pass out all

# block all incoming packets but allow ssh, pass all outgoing tcp and udp
# connections and keep state, logging blocked packets.
#block in log all
#pass  in  on $ext_if proto tcp from any to $ext_if port 22 keep state
#pass  out on $ext_if proto { tcp, udp } all keep state

# pass incoming packets destined to the addresses given in table <foo>.
#pass in on $ext_if proto { tcp, udp } from any to <foo> port 80 keep state

# pass incoming ports for ftp-proxy
#pass in on $ext_if inet proto tcp from any to $ext_if user proxy keep state

# assign packets to a queue.
#pass out on $ext_if from 192.168.0.0/24 to any keep state queue developers
#pass out on $ext_if from 192.168.1.0/24 to any keep state queue marketing