Tun and ALTQ

[Marko Cuk]

Resend...

Please, does anyone have any ideas...


What is the status of the tun0 driver and ALTQ ?
I have FreeBSD 6.0-RELEASE and have tried it without success. Why 6.0 ? 
Don't know... curious maybe... if you think, that 5.4 will work better, 
I'll reinstall it.

The tun0 is because od xDSL ( PPPoE )

It seems like packets won't match queue. Look at the pfctl output ( look 
at the "bucy" rules -- he is a huge consumer and the primary uplink is 
out for a week, xDSL is only backup and he consumes all the avail 
bandwidth )


THIS IFACE IS TUN0 ( pppoe )
queue root_em0 bandwidth 1Gb priority 0 cbq( wrr root ) {std_ext, bucy_out}
 [ pkts:      76053  bytes:    7390221  dropped pkts:      0 bytes:      
0 ]
 [ qlength:   0/ 50  borrows:      0  suspends:      0 ]
 [ measured:   199.0 packets/s, 146.71Kb/s ]
queue  std_ext bandwidth 384Kb cbq( default )
 [ pkts:      76053  bytes:    7390221  dropped pkts:      0 bytes:      
0 ]
 [ qlength:   0/ 50  borrows:      0  suspends:     59 ]
 [ measured:   199.0 packets/s, 146.71Kb/s ]

THIS ONE IS PROBLEMATIC - Won't match
queue  bucy_out bandwidth 128Kb
 [ pkts:          0  bytes:          0  dropped pkts:      0 bytes:      
0 ]
 [ qlength:   0/ 50  borrows:      0  suspends:      0 ]
 [ measured:     0.0 packets/s, 0 b/s ]
queue root_em1 bandwidth 1Gb priority 0 cbq( wrr root ) {std_int, bucy_in}
 [ pkts:      91920  bytes:  100394990  dropped pkts:      0 bytes:      
0 ]
 [ qlength:   0/ 50  borrows:      0  suspends:      0 ]
 [ measured:   260.4 packets/s, 2.37Mb/s ]
queue  std_int bandwidth 2Mb cbq( default )
 [ pkts:      50302  bytes:   58076735  dropped pkts:      0 bytes:      
0 ]
 [ qlength:   0/ 50  borrows:      0  suspends:   2359 ]
 [ measured:   194.6 packets/s, 1.89Mb/s ]
queue  bucy_in bandwidth 900Kb
 [ pkts:      41618  bytes:   42318255  dropped pkts:    446 bytes: 
433317 ]
 [ qlength:   0/ 50  borrows:      0  suspends:   7440 ]
 [ measured:    65.8 packets/s, 475.89Kb/s ]


queue root_dc0 bandwidth 10Mb priority 0 cbq( wrr root ) {std_int_wifi_in}
 [ pkts:       3967  bytes:    1730908  dropped pkts:      0 bytes:      
0 ]
 [ qlength:   0/ 50  borrows:      0  suspends:      0 ]
 [ measured:     2.6 packets/s, 4.17Kb/s ]
queue  std_int_wifi_in bandwidth 5Mb cbq( default )
 [ pkts:       3967  bytes:    1730908  dropped pkts:      0 bytes:      
0 ]
 [ qlength:   0/ 50  borrows:      0  suspends:      0 ]
 [ measured:     2.6 packets/s, 4.17Kb/s ]


This are the rules:
########################################################################################## 

# QUEUEING: rule-based bandwidth control.
########################################################################################### 

# TOLE JE NAS ODHODNI PROMET VEN - UPLOAD
altq on em0 cbq bandwidth 100% queue { std_ext,bucy_out }
queue std_ext           bandwidth 384Kb cbq(default)
queue bucy_out          bandwidth 128Kb


######################################################################################### 

# TOLE JE NAS DOHODNI PROMER NOTRI - DOWNLOAD
altq on em1 cbq bandwidth 100% queue { std_int,bucy_in }
queue std_int           bandwidth 2Mb cbq(default)
queue bucy_in          bandwidth 900Kb



# QUEUE rule
pass in log on em1 from 10.0.100.0/24 to any queue bucy_out
pass out log on em1 from any to 10.0.100.0/24 queue bucy_in



Many thanks for any informations. I have changed the various eth cards, 
from dc cards to em gigabit cards, etc, etc. Without success. I know, 
that there has been some issues with tun0 on OpenBSD, but that was a 
little time ago.


Cuk


-- 
NetInet d.o.o. http://www.NetInet.si
Private: http://cuk.nu
MountainBikeSlovenia team: http://mtb.si
Slovenian FreeBSD mirror admin http://www2.si.freebsd.org