pfsync / 6-CURRENT-amd64

[Sascha Luck]

Hi,

I've built a redundant firewall setup with pf / CARP / pfsync on 
CURRENT. pf and CARP are working well, the traffic fails over 
without problems. 
pfsyc, however, seems not to work at all. There is no traffic on 
the sync interface, the states are (obviously) not being synced.

The NICs are all Intel 1000MT dual-port cards (btw, I can confirm
that fail-over on VLAN interfaces on em NICs does work on CURRENT)

CURRENT kernel versions:
FreeBSD 6.0-CURRENT #0: Sun Jun 26 02:10:42 IST 2005

pf, pflog and pfsync are built into the kernel. both pfsync 
interfaces are up and connected to the syncif, they are connected 
by xover cable:

cwi010# ifconfig pfsync0
pfsync0: flags=41<UP,RUNNING> mtu 1348
        pfsync: syncdev: em5 maxupd: 128

em5: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=4b<RXCSUM,TXCSUM,VLAN_MTU,POLLING>
        inet 10.10.255.2 netmask 0xffffff00 broadcast 10.10.255.255
        inet6 fe80::211:43ff:fee5:8377%em5 prefixlen 64 scopeid 0x6
        ether 00:11:43:e5:83:77
        media: Ethernet autoselect (1000baseTX <full-duplex>)
        status: active

Has anyone seen similar effects? Is this connected to the network 
interface changes as of Jun 9?

cheers,
s.