Fwd: p5-Search-Saryer-0.40_1 failed on amd64 9
Martin Wilke
miwi at freebsd.org
Fri May 24 18:17:29 UTC 2013
Begin forwarded message:
> From: Portbuild user <portbuild at FreeBSD.org>
> Subject: p5-Search-Saryer-0.40_1 failed on amd64 9
> Date: May 25, 2013 2:13:17 AM GMT+08:00
> To: miwi at freebsd.org, itetcu at FreeBSD.org
>
> You can also find this build log at
>
> http://pointyhat.freebsd.org/errorlogs/amd64-errorlogs/a.9.20130524083024.pointyhat/p5-Search-Saryer-0.40_1.log
>
> building p5-Search-Saryer-0.40_1 on beefy3.isc.freebsd.org
> in directory /a/pkgbuild/9/20130524083024.pointyhat/chroot/5469
> building for: 9.1-RELEASE amd64
> maintained by: perl at FreeBSD.org
> port directory: /usr/ports/textproc/p5-Search-Saryer
> Makefile ident: $FreeBSD: head/textproc/p5-Search-Saryer/Makefile 300897 2012-07-14 14:29:18Z beat $
> build started at Fri May 24 18:07:05 UTC 2013
> FETCH_DEPENDS=
> PATCH_DEPENDS=perl-5.14.2_3.tbz
> EXTRACT_DEPENDS=perl-5.14.2_3.tbz
> BUILD_DEPENDS=gamin-0.1.10_5.tbz gettext-0.18.1.1_1.tbz gio-fam-backend-2.34.3.tbz glib-2.34.3.tbz libffi-3.0.13.tbz libiconv-1.14_1.tbz pcre-8.32.tbz perl-5.14.2_3.tbz python27-2.7.5.tbz sary-1.2.0_2.tbz
> RUN_DEPENDS=gamin-0.1.10_5.tbz gettext-0.18.1.1_1.tbz gio-fam-backend-2.34.3.tbz glib-2.34.3.tbz libffi-3.0.13.tbz libiconv-1.14_1.tbz pcre-8.32.tbz perl-5.14.2_3.tbz python27-2.7.5.tbz sary-1.2.0_2.tbz
> PKG_DEPENDS=
> prefixes: LOCALBASE=usr/local
> add_pkg
> add_pkg
> ================================================================
> ====================<phase 1: make checksum>====================
> => Search-Saryer-0.40.tar.gz doesn't seem to exist in /tmp/distfiles/.
> => Attempting to fetch ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles//Search-Saryer-0.40.tar.gz
> Search-Saryer-0.40.tar.gz 5162 B 2430 kBps
> ===> Fetching all distfiles required by p5-Search-Saryer-0.40_1 for building
> => SHA256 Checksum OK for Search-Saryer-0.40.tar.gz.
> ================================================================
> ====================<phase 2: make extract>====================
> add_pkg perl-5.14.2_3.tbz
> adding dependencies
> adding package perl-5.14.2_3.tbz
> Removing stale symlinks from /usr/bin...
> Skipping /usr/bin/perl
> Skipping /usr/bin/perl5
> Done.
> Creating various symlinks in /usr/bin...
> Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl
> Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl5
> Done.
> Cleaning up /etc/make.conf... Done.
> Spamming /etc/make.conf... Done.
> ===> Fetching all distfiles required by p5-Search-Saryer-0.40_1 for building
> ===> Extracting for p5-Search-Saryer-0.40_1
> => SHA256 Checksum OK for Search-Saryer-0.40.tar.gz.
> ===> p5-Search-Saryer-0.40_1 depends on file: /usr/local/bin/perl5.14.2 - found
> Deleting perl-5.14.2_3
> Removing stale symlinks from /usr/bin...
> Removing /usr/bin/perl
> Removing /usr/bin/perl5
> Done.
> Cleaning up /etc/make.conf... Done.
> ================================================================
> ====================<phase 3: make patch>====================
> add_pkg perl-5.14.2_3.tbz
> adding dependencies
> adding package perl-5.14.2_3.tbz
> Removing stale symlinks from /usr/bin...
> Skipping /usr/bin/perl
> Skipping /usr/bin/perl5
> Done.
> Creating various symlinks in /usr/bin...
> Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl
> Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl5
> Done.
> Cleaning up /etc/make.conf... Done.
> Spamming /etc/make.conf... Done.
> ===> Patching for p5-Search-Saryer-0.40_1
> ===> p5-Search-Saryer-0.40_1 depends on file: /usr/local/bin/perl5.14.2 - found
> ===> Applying FreeBSD patches for p5-Search-Saryer-0.40_1
> Deleting perl-5.14.2_3
> Removing stale symlinks from /usr/bin...
> Removing /usr/bin/perl
> Removing /usr/bin/perl5
> Done.
> Cleaning up /etc/make.conf... Done.
> ================================================================
> ====================<phase 4: make build>====================
> add_pkg gamin-0.1.10_5.tbz gettext-0.18.1.1_1.tbz gio-fam-backend-2.34.3.tbz glib-2.34.3.tbz libffi-3.0.13.tbz libiconv-1.14_1.tbz pcre-8.32.tbz perl-5.14.2_3.tbz python27-2.7.5.tbz sary-1.2.0_2.tbz
> adding dependencies
> adding package gamin-0.1.10_5.tbz
> Removing stale symlinks from /usr/bin...
> Skipping /usr/bin/perl
> Skipping /usr/bin/perl5
> Done.
> Creating various symlinks in /usr/bin...
> Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl
> Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl5
> Done.
> Cleaning up /etc/make.conf... Done.
> Spamming /etc/make.conf... Done.
>
> ====
> Note that some of the standard modules are provided as separate
> ports since they require extra dependencies:
>
> bsddb databases/py-bsddb
> gdbm databases/py-gdbm
> sqlite3 databases/py-sqlite3
> tkinter x11-toolkits/py-tkinter
>
> Install them as needed.
> ====
>
> No schema files found: doing nothing.
>
> ===============================================================================
>
> Gamin will only provide realtime notification of changes for at most n files,
> where n is the minimum value between (kern.maxfiles * 0.7) and
> (kern.maxfilesperproc - 200). Beyond that limit, files will be polled.
>
> If you often open several large folders with Nautilus, you might want to
> increase the kern.maxfiles tunable (you do not need to set
> kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles).
>
> For a typical desktop, add the following line to /boot/loader.conf, then
> reboot the system:
>
> kern.maxfiles="25000"
>
> The behavior of gamin can be controlled via the various gaminrc files.
> See http://www.gnome.org/~veillard/gamin/config.html on how to create
> these files. In particular, if you find gam_server is taking up too much
> CPU time polling for changes, something like the following may help
> in one of the gaminrc files:
>
> # reduce polling frequency to once per 10 seconds
> # for UFS file systems in order to lower CPU load
> fsset ufs poll 10
>
> ===============================================================================
>
> adding package gettext-0.18.1.1_1.tbz
> skipping gettext-0.18.1.1_1, already added
> adding package gio-fam-backend-2.34.3.tbz
> adding package glib-2.34.3.tbz
> skipping glib-2.34.3, already added
> adding package libffi-3.0.13.tbz
> skipping libffi-3.0.13, already added
> adding package libiconv-1.14_1.tbz
> skipping libiconv-1.14_1, already added
> adding package pcre-8.32.tbz
> skipping pcre-8.32, already added
> adding package perl-5.14.2_3.tbz
> skipping perl-5.14.2_3, already added
> adding package python27-2.7.5.tbz
> skipping python27-2.7.5, already added
> adding package sary-1.2.0_2.tbz
> ===> p5-Search-Saryer-0.40_1 depends on file: /usr/local/bin/perl5.14.2 - found
> ===> p5-Search-Saryer-0.40_1 depends on shared library: sary.10 - found
> ===> Configuring for p5-Search-Saryer-0.40_1
> Checking if your kit is complete...
> Looks good
> Writing Makefile for Search::Saryer
> Writing MYMETA.yml
> ===> Building for p5-Search-Saryer-0.40_1
> cp Saryer.pm blib/lib/Search/Saryer.pm
> /usr/local/bin/perl5.14.2 /usr/local/lib/perl5/5.14.2/ExtUtils/xsubpp -typemap /usr/local/lib/perl5/5.14.2/ExtUtils/typemap Saryer.xs > Saryer.xsc && mv Saryer.xsc Saryer.c
> cc -c -O2 -pipe -fno-strict-aliasing -O2 -pipe -fno-strict-aliasing -DVERSION=\"0.40\" -DXS_VERSION=\"0.40\" -DPIC -fPIC "-I/usr/local/lib/perl5/5.14.2/mach/CORE" Saryer.c
> Saryer.xs:20:18: error: sary.h: No such file or directory
> Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_new':
> Saryer.xs:40: error: 'SarySearcher' undeclared (first use in this function)
> Saryer.xs:40: error: (Each undeclared identifier is reported only once
> Saryer.xs:40: error: for each function it appears in.)
> Saryer.xs:40: error: 'saryer' undeclared (first use in this function)
> Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_destroy':
> Saryer.xs:60: error: 'SarySearcher' undeclared (first use in this function)
> Saryer.xs:60: error: 'ps' undeclared (first use in this function)
> Saryer.xs:63: error: expected expression before ')' token
> Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_enable_cache':
> Saryer.xs:71: error: 'SarySearcher' undeclared (first use in this function)
> Saryer.xs:71: error: 'ps' undeclared (first use in this function)
> Saryer.xs:74: error: expected expression before ')' token
> Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_search':
> Saryer.xs:84: error: 'SarySearcher' undeclared (first use in this function)
> Saryer.xs:84: error: 'ps' undeclared (first use in this function)
> Saryer.xs:85: error: 'gboolean' undeclared (first use in this function)
> Saryer.xs:85: error: expected ';' before 'ret'
> Saryer.xs:88: error: expected expression before ')' token
> Saryer.xs:89: error: 'ret' undeclared (first use in this function)
> Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_icase_search':
> Saryer.xs:106: error: 'SarySearcher' undeclared (first use in this function)
> Saryer.xs:106: error: 'ps' undeclared (first use in this function)
> Saryer.xs:107: error: 'gboolean' undeclared (first use in this function)
> Saryer.xs:107: error: expected ';' before 'ret'
> Saryer.xs:110: error: expected expression before ')' token
> Saryer.xs:111: error: 'ret' undeclared (first use in this function)
> Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_get_next_line':
> Saryer.xs:126: error: 'SarySearcher' undeclared (first use in this function)
> Saryer.xs:126: error: 'ps' undeclared (first use in this function)
> Saryer.xs:127: error: 'SaryInt' undeclared (first use in this function)
> Saryer.xs:127: error: expected ';' before 'len'
> Saryer.xs:131: error: expected expression before ')' token
> Saryer.xs:132: error: 'len' undeclared (first use in this function)
> Saryer.xs:132: warning: assignment makes pointer from integer without a cast
> Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_get_next_context_lines':
> Saryer.xs:149: error: 'SarySearcher' undeclared (first use in this function)
> Saryer.xs:149: error: 'ps' undeclared (first use in this function)
> Saryer.xs:150: error: 'SaryInt' undeclared (first use in this function)
> Saryer.xs:150: error: expected ';' before 'len'
> Saryer.xs:154: error: expected expression before ')' token
> Saryer.xs:155: error: 'len' undeclared (first use in this function)
> Saryer.xs:155: warning: assignment makes pointer from integer without a cast
> Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_get_next_tagged_region':
> Saryer.xs:172: error: 'SarySearcher' undeclared (first use in this function)
> Saryer.xs:172: error: 'ps' undeclared (first use in this function)
> Saryer.xs:176: error: expected expression before ')' token
> Saryer.xs:177: warning: assignment makes pointer from integer without a cast
> Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_count_occurrences':
> Saryer.xs:193: error: 'SarySearcher' undeclared (first use in this function)
> Saryer.xs:193: error: 'ps' undeclared (first use in this function)
> Saryer.xs:196: error: expected expression before ')' token
> Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_sort_occurrences':
> Saryer.xs:207: error: 'SarySearcher' undeclared (first use in this function)
> Saryer.xs:207: error: 'ps' undeclared (first use in this function)
> Saryer.xs:210: error: expected expression before ')' token
> *** [Saryer.o] Error code 1
>
> Stop in /work/a/ports/textproc/p5-Search-Saryer/work/Search-Saryer-0.40.
> *** [do-build] Error code 1
>
> Stop in /a/ports/textproc/p5-Search-Saryer.
> ================================================================
> build of /usr/ports/textproc/p5-Search-Saryer ended at Fri May 24 18:13:15 UTC 2013
>
+-----------------oOO--(_)--OOo-------------------------+
With best Regards,
Martin Wilke (miwi_(at)_FreeBSD.org)
Mess with the Best, Die like the Rest
More information about the freebsd-perl
mailing list