drechsau at Geeks.ORG
Thu Jul 6 01:23:59 UTC 2006
On Wed, Jul 05, 2006 at 08:02:55PM -0500, Derrick T. Woolworth wrote:
> Sorry for cross-posting, but these issues seem relevant for lists...
That's okay, I am not on all and I'll create some bounces, I am sure.
> Has anyone had success with SATA300 controllers with FreeBSD 6.1?
> I've been trying Promise and nVidia nForce4 and I'm not having any
> luck. Using a MSI K8NGM2-L motherboard and others, but 6.1's
> installation hangs as soon as it sees ad4. I've also tried using an
> Adaptec 1210SA controller and had zero results. I've read that the
> chipset on this controller is not very good - forces serialized
> access to the controller's channels??? Nevertheless, I've got a K8N
> Diamond motherboard on a workstation and I was able to at least
> "start" the 6.1 installation. I have no idea if its stable. At
> this point, I'd settle for just knowing "which" SATA300 controller
> to use that will work successfully and "well" with FreeBSD 6.0 OR
> 6.1. Another question, would I have more success installing 6.0 and
> then upgrading the kernel and recompiling with a build-world?
I am running 6.0 and 6.1 systems (-STABLE) with both ARECA 12xx cards
and 3WARE/AMCC 9550SX cards.
Neither are cheap, but they are doing the job and are in use in binary
spoolers for news.
> I'm currently trying to build a moderate large system with 4 presentation
> servers, 2 database servers and one large storage system using NFS mapped to
> ~1.2 terrabyte of SATA disks (4x Maxtor 500GB 7200 RPM disks w/RAID5
> config). Any suggestions?
Up the # of spindles? :)
Mike Horwath, reachable via drechsau at Geeks.ORG
More information about the freebsd-performance