SFP+ on PRO/10GbE

[Dan Langille]

They seem to come up on boot ok for me. This system has not been rebooted since going to 10G. 

Is that what you meant?

On Tue, Mar 24, 2020, at 6:48 PM, Steven Hartland wrote:
> Watch out for the fact some nics don't fully initialise until they are 
> given an IP.
> 
> On 24/03/2020 21:45, Dan Langille wrote:
> > On Tue, Mar 24, 2020, at 4:58 PM, Sergey Akhmatov wrote:
> >> On 2020-03-24 11:22 PM, Dan Langille wrote:
> >>> 	media: Ethernet autoselect (1000baseSX <full-duplex,rxpause,txpause>)
> >>> 	status: active
> >>> 	supported media:
> >>> 		media autoselect
> >>> 		media 10Gbase-SR
> >>> 	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
> >>> 	plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
> >>> 	vendor: AVAGO PN: AFBR-703SDZ SN: AD0946A00YB DATE: 2009-11-10
> >>> 	module temperature: 38.09 C Voltage: 3.33 Volts
> >>> 	RX: 0.31 mW (-4.95 dBm) TX: 0.56 mW (-2.48 dBm)
> >>> [dan at r720-01:~] $
> >>>
> >>> That looks right to me, but I have never inspected this before.
> >> Not right actually. The supported media is "10Gbase-SR" which is correct
> >> for this type of SFP,  but autodetected is "1000baseSX" and it's not
> >> even listed as supported.
> >>
> >> That doesn't make sense to me, maybe try to set media type manually?
> >>
> >> # ifconfig ix0 media 10gbase-sr
> > See my recent post.  ifconfig down/up fixed the NIC.
> >
> > Thank you for your help. It is appreciated.
> >
> 
> _______________________________________________
> freebsd-net at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
>

-- 
  Dan Langille
  dan at langille.org