Anyone seen this error on em ?

[topper727]

Using Intel 82573 nic built on my pdsbm-ln2 1U server and only one port will
work. And my WIFI PCI card and dual legacy intel NIC PCI will cause system
to HALT on boot. If I pull those cards out the system will boot but only one
port will work that is built on the motherboard. If I disable both with
jumpers then I can use a PCI card in the system.

Refer to all the notes I did here
https://forum.pfsense.org/index.php?topic=84909.0

Here is my dmesg log
http://pastebin.com/tW9Qe3g2

Code:
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x4000-0x401f irq 16
at device 0.0 on pci2
pcib0: allocated type 3 (0xd0200000-0xd02fffff) for rid 20 of pcib2
pcib2: allocated initial memory window of 0xd0200000-0xd02fffff
pcib2: allocated memory range (0xd0200000-0xd021ffff) for rid 10 of em0
em0: Lazy allocation of 0x20000 bytes rid 0x10 type 3 at 0xd0200000
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 51
em0: using IRQ 256 for MSI
em0: Using an MSI interrupt
em0: Setup of Shared code failed
device_attach: em0 attach returned 6



--
View this message in context: http://freebsd.1045724.n5.nabble.com/Anyone-seen-this-error-on-em-tp4016166p5978277.html
Sent from the freebsd-net mailing list archive at Nabble.com.