[axe][ue0] Device send packets but any host in network can not receive any packet from it.

[Sergey Perevalov]

On 17.06.2010 02:10, Pyun YongHyeon wrote:
> On Thu, Jun 17, 2010 at 12:53:07AM +0500, Sergey Perevalov wrote:
>    
>> On 16.06.2010 23:07, Pyun YongHyeon wrote:
>>      
>>> EEPROM data
>>>        
>> dmesg:
>>
>> ugen4.2:<vendor 0x0b95>  at usbus4
>> axe0:<vendor 0x0b95 product 0x1780, rev 2.00/0.01, addr 2>  on usbus4
>> axe0: PHYADDR 0xe0:0x02
>> axe0: EEPROM data : 0x008c
>> miibus0:<MII bus>  on axe0
>> rgephy0:<RTL8169S/8110S/8211B media interface>  PHY 2 on miibus0
>> rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>> 1000baseT-FDX, auto
>> ue0:<USB Ethernet>  on axe0
>> ue0: Ethernet address: 00:0e:c6:88:09:4e
>> ue0: link state changed to DOWN
>>
>>      
> Thanks, how about this one?
> http://people.freebsd.org/~yongari/axe/axe.phy.diff2
>
>    
This one works perfect!!!

laptop# ping -f 192.168.2.6
PING 192.168.2.6 (192.168.2.6): 56 data bytes
........................................................................................................................................................................^C
--- 192.168.2.6 ping statistics ---
539966 packets transmitted, 539797 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.239/6.314/64.864/5.187 ms

Thank you very very much for you work!
Will this patch be integrated in next 8.1 release?

-- 
Regards, Sergey.