[em] 7.1-PRE, one em port works, one fails, no problem on 6.3-p1
Jan Mikkelsen
janm at transactionware.com
Tue Nov 25 22:02:54 PST 2008
Hi Jack,
I've just run some simple tests with your second tar file, and seems to
work fine. The error message on boot up is gone, and data can be
transferred. I'll leave it running on this version and report any other
issues I see.
Thanks!
Jan.
Jack Vogel wrote:
> I would appreciate any and all that can give this some quick test to do
> so, this is what you
> do:
> 1) save the contents of /usr/src/sys/dev/e1000
> 2) then overwrite it with this tarball, due to the way the
> drivers are
> packaged this change effects igb and em
>
> I most need to know if it fixes your ESB2 problem, but sanity testing on
> BOTH drivers
> would be most appreciated. I would really like this checked into 7.1 ASAP.
>
>
> On Tue, Nov 25, 2008 at 11:50 AM, Jan Mikkelsen
> <janm at transactionware.com <mailto:janm at transactionware.com>> wrote:
>
> Hi Jack,
>
> Thanks for the reply.
>
> Is there a workaround, or something I can merge myself? If not, any
> idea on
> when it might make it in?
>
> Thanks,
>
> Jan
>
> > -----Original Message-----
> > From: Jack Vogel [mailto:jfvogel at gmail.com
> <mailto:jfvogel at gmail.com>]
> > Sent: Wednesday, 26 November 2008 4:32 AM
> > To: Jan Mikkelsen
> > Cc: freebsd-net at freebsd.org <mailto:freebsd-net at freebsd.org>
> > Subject: Re: [em] 7.1-PRE, one em port works, one fails, no
> > problem on 6.3-p1
> >
> >
> > There is a fix for this, but have not been able to get it in yet :(
> >
> > Jack
> >
> >
> >
> > On Tue, Nov 25, 2008 at 5:02 AM, Jan Mikkelsen
> > <janm at transactionware.com <mailto:janm at transactionware.com>> wrote:
> >
> >
> > Hi,
> >
> > On a machine with a Supermicro X7DB8 board I get this
> > error on startup:
> >
> > em1: <Intel(R) PRO/1000 Network Connection 6.9.5> port
> > 0x3020-0x303f mem
> > 0xd8420000-0xd843ffff irq 19 at device 0.1 on pci6
> > em1: Using MSI interrupt
> > em1: Hardware Initialization Failed
> > em1: Unable to initialize the hardware
> > device_attach: em1 attach returned 5
> >
> > There is no management card in this particular machine,
> > and em0 on the same
> > motherboard is fine. I can see a few similar problems
> > in the archives, but
> > I don't see a definitive solution. The same machine
> > runs fine with 6.3-p1.
> >
> > Dmesg below.
> >
> > Any suggestions?
> >
> > Thanks,
> >
> > Jan Mikkelsen
> >
> > Copyright (c) 1992-2008 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
> > 1992, 1993, 1994
> > The Regents of the University of California. All
> > rights reserved.
> > FreeBSD is a registered trademark of The FreeBSD Foundation.
> > FreeBSD 7.1-PRERELEASE #0: Tue Nov 25 10:07:25 EST 2008
> >
> >
> > root at dm.transactionware.com:/home/janm/p4/freebsd-image-std-20
> > 08.2/work/base
> >
> > -freebsd/home/janm/p4/freebsd-image-std-2008.2/FreeBSD/src/sys/TW-SMP
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Intel(R) Xeon(R) CPU 5140 @ 2.33GHz
> > (2333.35-MHz K8-class
> > CPU)
> > Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
> >
> >
> > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE
> > P,MTRR,PGE,MCA
> >
> > ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> >
> >
> > Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16
> > ,xTPR,PDCM,DCA
> > >
> > AMD Features=0x20100800<SYSCALL,NX,LM>
> > AMD Features2=0x1<LAHF>
> > Cores per package: 2
> > usable memory = 4280651776 (4082 MB)
> > avail memory = 4117843968 (3927 MB)
> > ACPI APIC Table: <PTLTD APIC >
> > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> > cpu0 (BSP): APIC ID: 0
> > cpu1 (AP): APIC ID: 1
> > cpu2 (AP): APIC ID: 6
> > cpu3 (AP): APIC ID: 7
> > ioapic0 <Version 2.0> irqs 0-23 on motherboard
> > ioapic1 <Version 2.0> irqs 24-47 on motherboard
> > kbd1 at kbdmux0
> > ath_hal: 0.9.20.3 <http://0.9.20.3> (AR5210, AR5211,
> AR5212, RF5111,
> > RF5112, RF2413, RF5413)
> > acpi0: <SMCI SMCISLP2> on motherboard
> > acpi0: [ITHREAD]
> > acpi0: Power Button (fixed)
> > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> > acpi_timer0: <24-bit timer at 3.579545MHz> port
> > 0x1008-0x100b on acpi0
> > acpi_hpet0: <High Precision Event Timer> iomem
> > 0xfed00000-0xfed003ff on
> > acpi0
> > Timecounter "HPET" frequency 14318180 Hz quality 900
> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> > pci1: <ACPI PCI bus> on pcib1
> > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
> > pci2: <ACPI PCI bus> on pcib2
> > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
> > pci3: <ACPI PCI bus> on pcib3
> > pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
> > pci4: <ACPI PCI bus> on pcib4
> > ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port
> > 0x2400-0x24ff,0x2000-0x20ff mem 0xd8500000-0xd8501fff
> > irq 16 at device 2.0
> > on pci4
> > ahd0: [ITHREAD]
> > aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X
> > 67-100Mhz, 512 SCBs
> > ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port
> > 0x2c00-0x2cff,0x2800-0x28ff mem 0xd8502000-0xd8503fff
> > irq 17 at device 2.1
> > on pci4
> > ahd1: [ITHREAD]
> > aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X
> > 67-100Mhz, 512 SCBs
> > pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3
> > pci5: <ACPI PCI bus> on pcib5
> > bge0: <Altima Gigabit Ethernet Controller, ASIC rev. 0x105> mem
> > 0xd8600000-0xd860ffff irq 16 at device 1.0 on pci5
> > miibus0: <MII bus> on bge0
> > brgphy0: <BCM5701 10/100/1000baseTX PHY> PHY 1 on miibus0
> > brgphy0: 10baseT, 10baseT-FDX, 100baseTX,
> > 100baseTX-FDX, 1000baseT,
> > 1000baseT-FDX, auto
> > bge0: Ethernet address: 00:40:f4:66:b1:56
> > bge0: [ITHREAD]
> > pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
> > pci6: <ACPI PCI bus> on pcib6
> > em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port
> > 0x3000-0x301f mem
> > 0xd8400000-0xd841ffff irq 18 at device 0.0 on pci6
> > em0: Using MSI interrupt
> > em0: [FILTER]
> > em0: Ethernet address: 00:30:48:31:67:86
> > em1: <Intel(R) PRO/1000 Network Connection 6.9.5> port
> > 0x3020-0x303f mem
> > 0xd8420000-0xd843ffff irq 19 at device 0.1 on pci6
> > em1: Using MSI interrupt
> > em1: Hardware Initialization Failed
> > em1: Unable to initialize the hardware
> > device_attach: em1 attach returned 5
> > pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1
> > pci7: <ACPI PCI bus> on pcib7
> > pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> > pci8: <ACPI PCI bus> on pcib8
> > pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> > pci9: <ACPI PCI bus> on pcib9
> > pcib10: <PCI-PCI bridge> at device 0.0 on pci9
> > pci10: <PCI bus> on pcib10
> > arcmsr0: <Areca SATA Host Adapter RAID Controller
> > (RAID6 capable)
> > > mem 0xd8900000-0xd8900fff,0xd8000000-0xd83fffff irq
> > 16 at device 14.0 on
> > pci10
> > ARECA RAID ADAPTER0: Driver Version 1.20.00.15
> <http://1.20.00.15> 2007-10-07
> > ARECA RAID ADAPTER0: FIRMWARE VERSION V1.42 2006-10-13
> > arcmsr0: [ITHREAD]
> > pcib11: <PCI-PCI bridge> at device 0.2 on pci9
> > pci11: <PCI bus> on pcib11
> > pcib12: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
> > pci12: <ACPI PCI bus> on pcib12
> > uhci0: <Intel 631XESB/632XESB/3100 USB controller
> > USB-1> port 0x1800-0x181f
> > irq 17 at device 29.0 on pci0
> > uhci0: [GIANT-LOCKED]
> > uhci0: [ITHREAD]
> > usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on
> uhci0
> > usb0: USB revision 1.0
> > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
> > addr 1> on usb0
> > uhub0: 2 ports with 2 removable, self powered
> > uhci1: <Intel 631XESB/632XESB/3100 USB controller
> > USB-2> port 0x1820-0x183f
> > irq 19 at device 29.1 on pci0
> > uhci1: [GIANT-LOCKED]
> > uhci1: [ITHREAD]
> > usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on
> uhci1
> > usb1: USB revision 1.0
> > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
> > addr 1> on usb1
> > uhub1: 2 ports with 2 removable, self powered
> > uhci2: <Intel 631XESB/632XESB/3100 USB controller
> > USB-3> port 0x1840-0x185f
> > irq 18 at device 29.2 on pci0
> > uhci2: [GIANT-LOCKED]
> > uhci2: [ITHREAD]
> > usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on
> uhci2
> > usb2: USB revision 1.0
> > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
> > addr 1> on usb2
> > uhub2: 2 ports with 2 removable, self powered
> > ehci0: <Intel 63XXESB USB 2.0 controller> mem
> > 0xd8c00000-0xd8c003ff irq 17
> > at device 29.7 on pci0
> > ehci0: [GIANT-LOCKED]
> > ehci0: [ITHREAD]
> > usb3: EHCI version 1.0
> > usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> > usb3: <Intel 63XXESB USB 2.0 controller> on ehci0
> > usb3: USB revision 2.0
> > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00,
> > addr 1> on usb3
> > uhub3: 6 ports with 6 removable, self powered
> > pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> > pci13: <ACPI PCI bus> on pcib13
> > vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem
> > 0xd0000000-0xd7ffffff,0xd8800000-0xd880ffff irq 18 at
> > device 1.0 on pci13
> > isab0: <PCI-ISA bridge> at device 31.0 on pci0
> > isa0: <ISA bus> on isab0
> > atapci0: <Intel 63XXESB2 UDMA100 controller> port
> > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at
> > device 31.1 on pci0
> > ata0: <ATA channel 0> on atapci0
> > ata0: [ITHREAD]
> > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> > acpi_button0: <Power Button> on acpi0
> > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64
> > irq 1 on acpi0
> > atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > kbd0 at atkbd0
> > atkbd0: [GIANT-LOCKED]
> > atkbd0: [ITHREAD]
> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
> > psm0: [GIANT-LOCKED]
> > psm0: [ITHREAD]
> > psm0: model Generic PS/2 mouse, device ID 0
> > sio0: configured irq 4 not in bitmap of probed irqs 0
> > sio0: port may not be enabled
> > sio0: configured irq 4 not in bitmap of probed irqs 0
> > sio0: port may not be enabled
> > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq
> > 4 flags 0x10 on
> > acpi0
> > sio0: type 16550A
> > sio0: [FILTER]
> > sio1: configured irq 3 not in bitmap of probed irqs 0
> > sio1: port may not be enabled
> > sio1: configured irq 3 not in bitmap of probed irqs 0
> > sio1: port may not be enabled
> > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq
> > 3 on acpi0
> > sio1: type 16550A
> > sio1: [FILTER]
> > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7
> > irq 6 drq 2 on acpi0
> > fdc0: [FILTER]
> > ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq
> > 7 drq 3 on acpi0
> > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> > ppc0: FIFO with 16/16/9 bytes threshold
> > ppbus0: <Parallel port bus> on ppc0
> > ppbus0: [ITHREAD]
> > plip0: <PLIP network interface> on ppbus0
> > plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
> > lpt0: <Printer> on ppbus0
> > lpt0: Interrupt-driven port
> > ppi0: <Parallel I/O> on ppbus0
> > ppc0: [GIANT-LOCKED]
> > ppc0: [ITHREAD]
> > cpu0: <ACPI CPU> on acpi0
> > est0: <Enhanced SpeedStep Frequency Control> on cpu0
> > est: CPU supports Enhanced Speedstep, but is not recognized.
> > est: cpu_vendor GenuineIntel, msr 728072806000728
> > device_attach: est0 attach returned 6
> > p4tcc0: <CPU Frequency Thermal Control> on cpu0
> > cpu1: <ACPI CPU> on acpi0
> > est1: <Enhanced SpeedStep Frequency Control> on cpu1
> > est: CPU supports Enhanced Speedstep, but is not recognized.
> > est: cpu_vendor GenuineIntel, msr 728072806000728
> > device_attach: est1 attach returned 6
> > p4tcc1: <CPU Frequency Thermal Control> on cpu1
> > cpu2: <ACPI CPU> on acpi0
> > est2: <Enhanced SpeedStep Frequency Control> on cpu2
> > est: CPU supports Enhanced Speedstep, but is not recognized.
> > est: cpu_vendor GenuineIntel, msr 728072806000728
> > device_attach: est2 attach returned 6
> > p4tcc2: <CPU Frequency Thermal Control> on cpu2
> > cpu3: <ACPI CPU> on acpi0
> > est3: <Enhanced SpeedStep Frequency Control> on cpu3
> > est: CPU supports Enhanced Speedstep, but is not recognized.
> > est: cpu_vendor GenuineIntel, msr 728072806000728
> > device_attach: est3 attach returned 6
> > p4tcc3: <CPU Frequency Thermal Control> on cpu3
> > orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
> > 0xa0000-0xbffff on isa0
> > Timecounters tick every 1.000 msec
> > acd0: DVDR <PIONEER DVD-RW DVR-111D/1.23> at ata0-master UDMA66
> > Waiting 5 seconds for SCSI devices to settle
> > (probe46:arcmsr0:0:16:0): inquiry data fails comparison
> > at DV1 step
> > da0 at arcmsr0 bus 0 target 0 lun 0
> > da0: <Areca ARC-1220-VOL#00 R001> Fixed Direct Access
> > SCSI-5 device
> > da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
> > da0: 77247MB (158201856 512 byte sectors: 255H 63S/T 9847C)
> > da1 at arcmsr0 bus 0 target 1 lun 0
> > da1: <Areca ARC-1220-VOL#01 R001> Fixed Direct Access
> > SCSI-5 device
> > da1: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
> > da1: 953673MB (1953122304 512 byte sectors: 255H 63S/T 121576C)
> > da2 at arcmsr0 bus 0 target 2 lun 0
> > da2: <Areca ARC-1220-VOL#02 R001> Fixed Direct Access
> > SCSI-5 device
> > da2: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
> > da2: 800131MB (1638669312 512 byte sectors: 255H 63S/T 102002C)
> > sa0 at ahd1 bus 0 target 6 lun 0
> > sa0: <SEAGATE DAT 04106-XXX 7600> Removable
> > Sequential Access SCSI-2
> > device
> > sa0: 10.000MB/s transfers (10.000MHz, offset 15)
> > SMP: AP CPU #1 Launched!
> > SMP: AP CPU #2 Launched!
> > SMP: AP CPU #3 Launched!
> > Trying to mount root from ufs:/dev/da0s1a
> > This module (opensolaris) contains code covered by the
> > Common Development and Distribution License (CDDL)
> > see http://opensolaris.org/os/licensing/opensolaris_license/
> > WARNING: ZFS is considered to be an experimental
> > feature in FreeBSD.
> > ZFS filesystem version 6
> > ZFS storage pool version 6
> > em0: link state changed to UP
> > bge0: link state changed to UP
> >
> > _______________________________________________
> > freebsd-net at freebsd.org <mailto:freebsd-net at freebsd.org>
> mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-net
> > To unsubscribe, send any mail to
> > "freebsd-net-unsubscribe at freebsd.org
> <mailto:freebsd-net-unsubscribe at freebsd.org>"
> >
> >
> >
> >
>
>
More information about the freebsd-net
mailing list