[em] 7.1-PRE, one em port works, one fails, no problem on 6.3-p1
Jan Mikkelsen
janm at transactionware.com
Tue Nov 25 11:50:54 PST 2008
Hi Jack,
Thanks for the reply.
Is there a workaround, or something I can merge myself? If not, any idea on
when it might make it in?
Thanks,
Jan
> -----Original Message-----
> From: Jack Vogel [mailto:jfvogel at gmail.com]
> Sent: Wednesday, 26 November 2008 4:32 AM
> To: Jan Mikkelsen
> Cc: freebsd-net at freebsd.org
> Subject: Re: [em] 7.1-PRE, one em port works, one fails, no
> problem on 6.3-p1
>
>
> There is a fix for this, but have not been able to get it in yet :(
>
> Jack
>
>
>
> On Tue, Nov 25, 2008 at 5:02 AM, Jan Mikkelsen
> <janm at transactionware.com> wrote:
>
>
> Hi,
>
> On a machine with a Supermicro X7DB8 board I get this
> error on startup:
>
> em1: <Intel(R) PRO/1000 Network Connection 6.9.5> port
> 0x3020-0x303f mem
> 0xd8420000-0xd843ffff irq 19 at device 0.1 on pci6
> em1: Using MSI interrupt
> em1: Hardware Initialization Failed
> em1: Unable to initialize the hardware
> device_attach: em1 attach returned 5
>
> There is no management card in this particular machine,
> and em0 on the same
> motherboard is fine. I can see a few similar problems
> in the archives, but
> I don't see a definitive solution. The same machine
> runs fine with 6.3-p1.
>
> Dmesg below.
>
> Any suggestions?
>
> Thanks,
>
> Jan Mikkelsen
>
> Copyright (c) 1992-2008 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
> 1992, 1993, 1994
> The Regents of the University of California. All
> rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.1-PRERELEASE #0: Tue Nov 25 10:07:25 EST 2008
>
>
> root at dm.transactionware.com:/home/janm/p4/freebsd-image-std-20
> 08.2/work/base
>
> -freebsd/home/janm/p4/freebsd-image-std-2008.2/FreeBSD/src/sys/TW-SMP
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(R) CPU 5140 @ 2.33GHz
> (2333.35-MHz K8-class
> CPU)
> Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
>
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE
> P,MTRR,PGE,MCA
>
> ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
>
> Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16
> ,xTPR,PDCM,DCA
> >
> AMD Features=0x20100800<SYSCALL,NX,LM>
> AMD Features2=0x1<LAHF>
> Cores per package: 2
> usable memory = 4280651776 (4082 MB)
> avail memory = 4117843968 (3927 MB)
> ACPI APIC Table: <PTLTD APIC >
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> cpu2 (AP): APIC ID: 6
> cpu3 (AP): APIC ID: 7
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> kbd1 at kbdmux0
> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111,
> RF5112, RF2413, RF5413)
> acpi0: <SMCI SMCISLP2> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port
> 0x1008-0x100b on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem
> 0xfed00000-0xfed003ff on
> acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
> pci4: <ACPI PCI bus> on pcib4
> ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port
> 0x2400-0x24ff,0x2000-0x20ff mem 0xd8500000-0xd8501fff
> irq 16 at device 2.0
> on pci4
> ahd0: [ITHREAD]
> aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X
> 67-100Mhz, 512 SCBs
> ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port
> 0x2c00-0x2cff,0x2800-0x28ff mem 0xd8502000-0xd8503fff
> irq 17 at device 2.1
> on pci4
> ahd1: [ITHREAD]
> aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X
> 67-100Mhz, 512 SCBs
> pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3
> pci5: <ACPI PCI bus> on pcib5
> bge0: <Altima Gigabit Ethernet Controller, ASIC rev. 0x105> mem
> 0xd8600000-0xd860ffff irq 16 at device 1.0 on pci5
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5701 10/100/1000baseTX PHY> PHY 1 on miibus0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX,
> 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bge0: Ethernet address: 00:40:f4:66:b1:56
> bge0: [ITHREAD]
> pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
> pci6: <ACPI PCI bus> on pcib6
> em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port
> 0x3000-0x301f mem
> 0xd8400000-0xd841ffff irq 18 at device 0.0 on pci6
> em0: Using MSI interrupt
> em0: [FILTER]
> em0: Ethernet address: 00:30:48:31:67:86
> em1: <Intel(R) PRO/1000 Network Connection 6.9.5> port
> 0x3020-0x303f mem
> 0xd8420000-0xd843ffff irq 19 at device 0.1 on pci6
> em1: Using MSI interrupt
> em1: Hardware Initialization Failed
> em1: Unable to initialize the hardware
> device_attach: em1 attach returned 5
> pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1
> pci7: <ACPI PCI bus> on pcib7
> pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci8: <ACPI PCI bus> on pcib8
> pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci9: <ACPI PCI bus> on pcib9
> pcib10: <PCI-PCI bridge> at device 0.0 on pci9
> pci10: <PCI bus> on pcib10
> arcmsr0: <Areca SATA Host Adapter RAID Controller
> (RAID6 capable)
> > mem 0xd8900000-0xd8900fff,0xd8000000-0xd83fffff irq
> 16 at device 14.0 on
> pci10
> ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07
> ARECA RAID ADAPTER0: FIRMWARE VERSION V1.42 2006-10-13
> arcmsr0: [ITHREAD]
> pcib11: <PCI-PCI bridge> at device 0.2 on pci9
> pci11: <PCI bus> on pcib11
> pcib12: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
> pci12: <ACPI PCI bus> on pcib12
> uhci0: <Intel 631XESB/632XESB/3100 USB controller
> USB-1> port 0x1800-0x181f
> irq 17 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
> addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 631XESB/632XESB/3100 USB controller
> USB-2> port 0x1820-0x183f
> irq 19 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
> addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 631XESB/632XESB/3100 USB controller
> USB-3> port 0x1840-0x185f
> irq 18 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
> usb2: USB revision 1.0
> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
> addr 1> on usb2
> uhub2: 2 ports with 2 removable, self powered
> ehci0: <Intel 63XXESB USB 2.0 controller> mem
> 0xd8c00000-0xd8c003ff irq 17
> at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb3: EHCI version 1.0
> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> usb3: <Intel 63XXESB USB 2.0 controller> on ehci0
> usb3: USB revision 2.0
> uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00,
> addr 1> on usb3
> uhub3: 6 ports with 6 removable, self powered
> pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci13: <ACPI PCI bus> on pcib13
> vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem
> 0xd0000000-0xd7ffffff,0xd8800000-0xd880ffff irq 18 at
> device 1.0 on pci13
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel 63XXESB2 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at
> device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata0: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64
> irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: [ITHREAD]
> psm0: model Generic PS/2 mouse, device ID 0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq
> 4 flags 0x10 on
> acpi0
> sio0: type 16550A
> sio0: [FILTER]
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq
> 3 on acpi0
> sio1: type 16550A
> sio1: [FILTER]
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7
> irq 6 drq 2 on acpi0
> fdc0: [FILTER]
> ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq
> 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> ppbus0: [ITHREAD]
> plip0: <PLIP network interface> on ppbus0
> plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ppc0: [GIANT-LOCKED]
> ppc0: [ITHREAD]
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 728072806000728
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 728072806000728
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> cpu2: <ACPI CPU> on acpi0
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 728072806000728
> device_attach: est2 attach returned 6
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> cpu3: <ACPI CPU> on acpi0
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 728072806000728
> device_attach: est3 attach returned 6
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
> 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> acd0: DVDR <PIONEER DVD-RW DVR-111D/1.23> at ata0-master UDMA66
> Waiting 5 seconds for SCSI devices to settle
> (probe46:arcmsr0:0:16:0): inquiry data fails comparison
> at DV1 step
> da0 at arcmsr0 bus 0 target 0 lun 0
> da0: <Areca ARC-1220-VOL#00 R001> Fixed Direct Access
> SCSI-5 device
> da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
> da0: 77247MB (158201856 512 byte sectors: 255H 63S/T 9847C)
> da1 at arcmsr0 bus 0 target 1 lun 0
> da1: <Areca ARC-1220-VOL#01 R001> Fixed Direct Access
> SCSI-5 device
> da1: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
> da1: 953673MB (1953122304 512 byte sectors: 255H 63S/T 121576C)
> da2 at arcmsr0 bus 0 target 2 lun 0
> da2: <Areca ARC-1220-VOL#02 R001> Fixed Direct Access
> SCSI-5 device
> da2: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
> da2: 800131MB (1638669312 512 byte sectors: 255H 63S/T 102002C)
> sa0 at ahd1 bus 0 target 6 lun 0
> sa0: <SEAGATE DAT 04106-XXX 7600> Removable
> Sequential Access SCSI-2
> device
> sa0: 10.000MB/s transfers (10.000MHz, offset 15)
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #3 Launched!
> Trying to mount root from ufs:/dev/da0s1a
> This module (opensolaris) contains code covered by the
> Common Development and Distribution License (CDDL)
> see http://opensolaris.org/os/licensing/opensolaris_license/
> WARNING: ZFS is considered to be an experimental
> feature in FreeBSD.
> ZFS filesystem version 6
> ZFS storage pool version 6
> em0: link state changed to UP
> bge0: link state changed to UP
>
> _______________________________________________
> freebsd-net at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to
> "freebsd-net-unsubscribe at freebsd.org"
>
>
>
>
More information about the freebsd-net
mailing list