re0: Unknown H/W revision: 0x28000000 device_attach: re0 attach
returned 6
Andrew Tulloch
andrew at flarn.com
Tue Dec 2 12:05:13 PST 2008
2008/12/2 Pyun YongHyeon <pyunyh at gmail.com>:
> On Tue, Dec 02, 2008 at 12:50:07AM +0000, Andrew wrote:
> > 2008/12/1 Pyun YongHyeon <pyunyh at gmail.com>:
> > > On Sun, Nov 30, 2008 at 03:18:41AM +0000, Andrew Tulloch wrote:
> > > > I've just installed from the FreeBSD 7.1-BETA1 iso and get the
> > > > following when the re driver attempts to attach to the two onboard
> > > > NICs found on a Gigabyte GA-EX58-UD5 motherboard:
> > > >
> > > > re0: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit
> > > > Ethernet> port 0x9e00-0x9eff mem
> > > > 0xfd3ff000-0xfd3fffff,0xfd3f8000-0xfd3fbfff irq 16 at device 0.0 on
> > > > pci8
> > > > re0: Chip rev. 0x28000000
> > > > re0: MAC rev. 0x00100000
> > > > re0: Unknown H/W revision: 0x28000000
> > > > device_attach: re0 attach returned 6
> > > > pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
> > > > pci9: <ACPI PCI bus> on pcib9
> > > > re1: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit
> > > > Ethernet> port 0x8e00-0x8eff mem
> > > > 0xfd1ff000-0xfd1fffff,0xfd1f8000-0xfd1fbfff irq 17 at device 0.0 on
> > > > pci9
> > > > re1: Chip rev. 0x28000000
> > > > re1: MAC rev. 0x00100000
> > > > re1: Unknown H/W revision: 0x28000000
> > > > device_attach: re1 attach returned 6
> > > >
> > > > pciconf -lvc extract:
> > > > re0 at pci0:8:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x03 hdr=0x00
> > > > vendor = 'Realtek Semiconductor'
> > > > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
> > > > class = network
> > > > subclass = ethernet
> > > > cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
> > > > cap 05[50] = MSI supports 1 message, 64 bit
> > > > cap 10[70] = PCI-Express 2 endpoint IRQ 0
> > > > cap 11[ac] = MSI-X supports 4 messages in map 0x20
> > > > cap 03[cc] = VPD
> > > > re1 at pci0:9:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x03 hdr=0x00
> > > > vendor = 'Realtek Semiconductor'
> > > > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
> > > > class = network
> > > > subclass = ethernet
> > > > cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
> > > > cap 05[50] = MSI supports 1 message, 64 bit
> > > > cap 10[70] = PCI-Express 2 endpoint IRQ 0
> > > > cap 11[ac] = MSI-X supports 4 messages in map 0x20
> > > > cap 03[cc] = VPD
> > > >
> > > >
> > > > Is there any simple patch I can apply to get the driver to attach,
> > > > assuming it should work?
> > > >
> > >
> > > This controller seems to support MSI-X with 4 messages.
> > > Unfortunately previous PCIe controllers from RealTek were notorious
> > > for MSI issues so it's hard to know this revision really works with
> > > MSI-X. I guess it was added to support RSS(receive-side scaling of
> > > MS NDIS 6.0).
> > > As sephe said if the controller configuration is the same as 8168C
> > > family, the attached patch would make re(4) work as expected.
> > >
> > > --
> > > Regards,
> > > Pyun YongHyeon
> > >
> >
> > Pyun,
> > I applied the patch, but it didn't attach initially, I added an extra
> > entry to re_hwrevs as that seemed to be what was missing and it
> > attached and seems to function (as far as a quick ping test and make
> > update). Changes I made to if_re.c attached. If you have anything to
> > try for MSI-X I can probably test those.
> >
>
> You're right. I've missed to update revision entry. :-)
>
> I guess MSI-X requires a documentation from RealTek as it may have
> to map interrupt source to MSI-X vectors. It may also need to map
> PBA to MSI-X work on 8168D. Would you show me dmesg output of
> re(4)?
>
> Thanks for the patch and testing!
Pyun,
Full dmesg from boot -v attached.
Thanks,
Andrew
-------------- next part --------------
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-BETA2 #1: Tue Dec 2 00:16:48 GMT 2008
root@:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80c4c000.
Calibrating clock(s) ... i8254 clock: 1193202 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2698773787 Hz
CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (2698.77-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106a4 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>,<b20>,<b23>>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Cores per package: 8
Logical CPUs per core: 2
usable memory = 3205701632 (3057 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000d49000 - 0x00000000ba397fff, 3110400000 bytes (759375 pages)
avail memory = 3099422720 (2955 MB)
ACPI APIC Table: <GBT GBTUACPI>
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 7
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 6
APIC: CPU 4 has ACPI ID 2
APIC: CPU 5 has ACPI ID 5
APIC: CPU 6 has ACPI ID 1
APIC: CPU 7 has ACPI ID 4
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu 1
ULE: adding cpu 1 to group 0: cpus 2 mask 0x3
ULE: setup cpu group 1
ULE: setup cpu 2
ULE: adding cpu 2 to group 1: cpus 1 mask 0x4
ULE: setup cpu 3
ULE: adding cpu 3 to group 1: cpus 2 mask 0xC
ULE: setup cpu group 2
ULE: setup cpu 4
ULE: adding cpu 4 to group 2: cpus 1 mask 0x10
ULE: setup cpu 5
ULE: adding cpu 5 to group 2: cpus 2 mask 0x30
ULE: setup cpu group 3
ULE: setup cpu 6
ULE: adding cpu 6 to group 3: cpus 1 mask 0x40
ULE: setup cpu 7
ULE: adding cpu 7 to group 3: cpus 2 mask 0xC0
ACPI: RSDP @ 0x0xf7710/0x0014 (v 0 GBT )
ACPI: RSDT @ 0x0xbfee2040/0x0038 (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x01010101)
ACPI: FACP @ 0x0xbfee20c0/0x0074 (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x01010101)
ACPI: DSDT @ 0x0xbfee2180/0x4919 (v 1 GBT GBTUACPI 0x00001000 MSFT 0x0100000C)
ACPI: FACS @ 0x0xbfee0000/0x0040
ACPI: EUDS @ 0x0xbfee6cc0/0x0470 (v 1 GBT 0x00000000 0x00000000)
ACPI: MCFG @ 0x0xbfee6c80/0x003C (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x01010101)
ACPI: APIC @ 0x0xbfee6b00/0x00BC (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x01010101)
ACPI: SSDT @ 0x0xbfee7140/0x1EBC (v 1 INTEL PPM RCM 0x80000001 INTL 0x20061109)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: high
lapic4: Routing NMI -> LINT1
lapic4: LINT1 trigger: edge
lapic4: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: edge
lapic7: LINT1 polarity: high
lapic5: Routing NMI -> LINT1
lapic5: LINT1 trigger: edge
lapic5: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Dec 2 2008 00:16:43)
acpi0: <GBT GBTUACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIR2 -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bfde0000 (3) failed
ACPI timer: 1/1 1/1 1/2 1/2 1/0 1/2 1/0 1/1 1/1 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 12 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 12 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 7 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 4 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 4 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 3 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x3405, revid=0x12
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.0.INTA
pcib0: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3408, revid=0x12
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x340a, revid=0x12
domain=0, bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x340c, revid=0x12
domain=0, bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.5.INTA
pcib0: slot 5 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x340e, revid=0x12
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3410, revid=0x12
domain=0, bus=0, slot=9, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3425, revid=0x12
domain=0, bus=0, slot=16, func=0
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3426, revid=0x12
domain=0, bus=0, slot=16, func=1
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3427, revid=0x12
domain=0, bus=0, slot=17, func=0
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3428, revid=0x12
domain=0, bus=0, slot=17, func=1
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x342d, revid=0x12
domain=0, bus=0, slot=19, func=0
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfdfff000, size 12, enabled
found-> vendor=0x8086, dev=0x342e, revid=0x12
domain=0, bus=0, slot=20, func=0
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3422, revid=0x12
domain=0, bus=0, slot=20, func=1
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3423, revid=0x12
domain=0, bus=0, slot=20, func=2
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x342f, revid=0x12
domain=0, bus=0, slot=21, func=0
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a37, revid=0x00
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
map[20]: type I/O Port, range 32, base 0xff00, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a38, revid=0x00
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=4
map[20]: type I/O Port, range 32, base 0xfe00, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x3a39, revid=0x00
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
map[20]: type I/O Port, range 32, base 0xfd00, size 5, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a3c, revid=0x00
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfdffe000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a3e, revid=0x00
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfdff8000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x3a40, revid=0x00
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a42, revid=0x00
domain=0, bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3a48, revid=0x00
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a4a, revid=0x00
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3a34, revid=0x00
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
map[20]: type I/O Port, range 32, base 0xfc00, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x3a35, revid=0x00
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0xfb00, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a36, revid=0x00
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
map[20]: type I/O Port, range 32, base 0xfa00, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a3a, revid=0x00
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfdffd000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0x90
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a16, revid=0x00
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a20, revid=0x00
domain=0, bus=0, slot=31, func=2
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 3 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xf900, size 4, enabled
map[24]: type I/O Port, range 32, base 0xf800, size 4, enabled
found-> vendor=0x8086, dev=0x3a30, revid=0x00
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
map[10]: type Memory, range 64, base 0xfdffc000, size 8, enabled
map[20]: type I/O Port, range 32, base 0x500, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a26, revid=0x00
domain=0, bus=0, slot=31, func=5
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xf600, size 3, enabled
map[14]: type I/O Port, range 32, base 0xf500, size 2, enabled
map[18]: type I/O Port, range 32, base 0xf400, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xf300, size 2, enabled
map[20]: type I/O Port, range 32, base 0xf200, size 4, enabled
map[24]: type I/O Port, range 32, base 0xf100, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x5000-0x5fff
pcib1: memory decode 0xfdb00000-0xfdbfffff
pcib1: prefetched decode 0xfda00000-0xfdafffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <PCI-PCI bridge> irq 16 at device 3.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xf8000000-0xfbffffff
pcib2: prefetched decode 0xd0000000-0xdfffffff
pci2: <PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x10de, dev=0x05e2, revid=0xa1
domain=0, bus=2, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled
pcib2: requested memory range 0xfa000000-0xfaffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib2: requested memory range 0xd0000000-0xdfffffff: good
map[1c]: type Memory, range 64, base 0xf8000000, size 25, enabled
pcib2: requested memory range 0xf8000000-0xf9ffffff: good
map[24]: type I/O Port, range 32, base 0xdf00, size 7, enabled
pcib2: requested I/O range 0xdf00-0xdf7f: in range
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 16
pcib2: slot 0 INTA is routed to irq 16
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci2
pcib3: <PCI-PCI bridge> irq 16 at device 5.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xc000-0xcfff
pcib3: memory decode 0xfd900000-0xfd9fffff
pcib3: prefetched decode 0xfd000000-0xfd0fffff
pci3: <PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <PCI-PCI bridge> irq 16 at device 7.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x7000-0x7fff
pcib4: memory decode 0xfcd00000-0xfcdfffff
pcib4: prefetched decode 0xfde00000-0xfdefffff
pci4: <PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <PCI-PCI bridge> irq 16 at device 9.0 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0x6000-0x6fff
pcib5: memory decode 0xfdd00000-0xfddfffff
pcib5: prefetched decode 0xfdc00000-0xfdcfffff
pci5: <PCI bus> on pcib5
pci5: domain=0, physical bus=5
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff00
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfe00
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 18 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfd00
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq 18 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfdffe000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: waiting for BIOS to give up control
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0xb000-0xbfff
pcib6: memory decode 0xfd800000-0xfd8fffff
pcib6: prefetched decode 0xfd700000-0xfd7fffff
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib7: domain 0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0xa000-0xafff
pcib7: memory decode 0xfd600000-0xfd6fffff
pcib7: prefetched decode 0xfd500000-0xfd5fffff
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
found-> vendor=0x197b, dev=0x2363, revid=0x02
domain=0, bus=7, slot=0, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xaf00, size 3, enabled
pcib7: requested I/O range 0xaf00-0xaf07: in range
map[14]: type I/O Port, range 32, base 0xae00, size 2, enabled
pcib7: requested I/O range 0xae00-0xae03: in range
map[18]: type I/O Port, range 32, base 0xad00, size 3, enabled
pcib7: requested I/O range 0xad00-0xad07: in range
map[1c]: type I/O Port, range 32, base 0xac00, size 2, enabled
pcib7: requested I/O range 0xac00-0xac03: in range
map[20]: type I/O Port, range 32, base 0xab00, size 4, enabled
pcib7: requested I/O range 0xab00-0xab0f: in range
map[24]: type Memory, range 32, base 0xfd6fe000, size 13, enabled
pcib7: requested memory range 0xfd6fe000-0xfd6fffff: good
pcib7: matched entry for 7.0.INTA
pcib7: slot 0 INTA hardwired to IRQ 17
atapci0: <JMicron JMB363 SATA300 controller> port 0xaf00-0xaf07,0xae00-0xae03,0xad00-0xad07,0xac00-0xac03,0xab00-0xab0f mem 0xfd6fe000-0xfd6fffff irq 17 at device 0.0 on pci7
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xab00
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfd6fe000
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect status=00000000
ata2: ahci_reset devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: ahci_reset devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xaf00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xae00
ata4: reset tp1 mask=03 ostat0=60 ostat1=70
ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata4: reset tp2 stat0=20 stat1=30 devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pcib8: domain 0
pcib8: secondary bus 8
pcib8: subordinate bus 8
pcib8: I/O decode 0x9000-0x9fff
pcib8: memory decode 0xfd400000-0xfd4fffff
pcib8: prefetched decode 0xfd300000-0xfd3fffff
pci8: <ACPI PCI bus> on pcib8
pci8: domain=0, physical bus=8
found-> vendor=0x10ec, dev=0x8168, revid=0x03
domain=0, bus=8, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 4 messages in map 0x20
map[10]: type I/O Port, range 32, base 0x9e00, size 8, enabled
pcib8: requested I/O range 0x9e00-0x9eff: in range
map[18]: type Prefetchable Memory, range 64, base 0xfd3ff000, size 12, enabled
pcib8: requested memory range 0xfd3ff000-0xfd3fffff: good
map[20]: type Prefetchable Memory, range 64, base 0xfd3f8000, size 14, enabled
pcib8: requested memory range 0xfd3f8000-0xfd3fbfff: good
pcib8: matched entry for 8.0.INTA
pcib8: slot 0 INTA hardwired to IRQ 16
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0x9e00-0x9eff mem 0xfd3ff000-0xfd3fffff,0xfd3f8000-0xfd3fbfff irq 16 at device 0.0 on pci8
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfd3ff000
re0: MSI count : 1
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:1f:d0:ae:5d:a2
re0: [MPSAFE]
re0: [FILTER]
pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pcib9: domain 0
pcib9: secondary bus 9
pcib9: subordinate bus 9
pcib9: I/O decode 0x8000-0x8fff
pcib9: memory decode 0xfd200000-0xfd2fffff
pcib9: prefetched decode 0xfd100000-0xfd1fffff
pci9: <ACPI PCI bus> on pcib9
pci9: domain=0, physical bus=9
found-> vendor=0x10ec, dev=0x8168, revid=0x03
domain=0, bus=9, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 4 messages in map 0x20
map[10]: type I/O Port, range 32, base 0x8e00, size 8, enabled
pcib9: requested I/O range 0x8e00-0x8eff: in range
map[18]: type Prefetchable Memory, range 64, base 0xfd1ff000, size 12, enabled
pcib9: requested memory range 0xfd1ff000-0xfd1fffff: good
map[20]: type Prefetchable Memory, range 64, base 0xfd1f8000, size 14, enabled
pcib9: requested memory range 0xfd1f8000-0xfd1fbfff: good
pcib9: matched entry for 9.0.INTA
pcib9: slot 0 INTA hardwired to IRQ 17
re1: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0x8e00-0x8eff mem 0xfd1ff000-0xfd1fffff,0xfd1f8000-0xfd1fbfff irq 17 at device 0.0 on pci9
re1: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfd1ff000
re1: MSI count : 1
re1: Chip rev. 0x28000000
re1: MAC rev. 0x00100000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re1: bpf attached
re1: Ethernet address: 00:1f:d0:ae:5d:a4
re1: [MPSAFE]
re1: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 23 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfc00
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 19 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfb00
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xfa00-0xfa1f irq 18 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfa00
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffd000-0xfdffd3ff irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfdffd000
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: waiting for BIOS to give up control
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 2> on uhub7
umass0:0:0:-1: Attached to scbus0
pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib10: domain 0
pcib10: secondary bus 10
pcib10: subordinate bus 10
pcib10: I/O decode 0xe000-0xefff
pcib10: memory decode 0xfcf00000-0xfcffffff
pcib10: prefetched decode 0xfce00000-0xfcefffff
pcib10: Subtractively decoded bridge.
pci10: <ACPI PCI bus> on pcib10
pci10: domain=0, physical bus=10
found-> vendor=0x104c, dev=0x8024, revid=0x00
domain=0, bus=10, slot=6, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x02 (60 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfcfff000, size 11, enabled
pcib10: requested memory range 0xfcfff000-0xfcfff7ff: good
map[14]: type Memory, range 32, base 0xfcff8000, size 14, enabled
pcib10: requested memory range 0xfcff8000-0xfcffbfff: good
pcib10: matched entry for 10.6.INTA
pcib10: slot 6 INTA hardwired to IRQ 18
fwohci0: <Texas Instruments TSB43AB23> mem 0xfcfff000-0xfcfff7ff,0xfcff8000-0xfcffbfff irq 18 at device 6.0 on pci10
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfcfff000
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:ab:88:9a:00:00:1f:d0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x114c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:ab:88:00:1f:d0
fwe0: bpf attached
fwe0: Ethernet address: 02:ab:88:00:1f:d0
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:ab:88:9a:00:00:1f:d0 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f,0xf800-0xf80f at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf900
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata0: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=50
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=50 devices=0x6<ATAPI_MASTER,ATA_SLAVE>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ATA controller> port 0xf600-0xf607,0xf500-0xf503,0xf400-0xf407,0xf300-0xf303,0xf200-0xf20f,0xf100-0xf10f irq 19 at device 31.5 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf200
atapci2: [MPSAFE]
atapci2: [ITHREAD]
ata5: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf600
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf500
ata5: reset tp1 mask=03 ostat0=7f ostat1=7f
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=ff devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf400
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xf300
ata6: reset tp1 mask=03 ostat0=50 ostat1=00
ata6: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata6: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata6: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata6: [MPSAFE]
ata6: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57
fdc0: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (20, 21)
est0: Invalid freq 2660, ignored.
est0: Invalid id16 (set, cur) = (19, 21)
est0: Invalid freq 2527, ignored.
est0: Invalid id16 (set, cur) = (18, 21)
est0: Invalid freq 2394, ignored.
est0: Invalid id16 (set, cur) = (17, 21)
est0: Invalid freq 2261, ignored.
est0: Invalid id16 (set, cur) = (16, 21)
est0: Invalid freq 2128, ignored.
est0: Invalid id16 (set, cur) = (15, 21)
est0: Invalid freq 1995, ignored.
est0: Invalid id16 (set, cur) = (14, 21)
est0: Invalid freq 1862, ignored.
est0: Invalid id16 (set, cur) = (13, 21)
est0: Invalid freq 1729, ignored.
est0: Invalid id16 (set, cur) = (12, 21)
est0: Invalid freq 1596, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (20, 21)
est1: Invalid freq 2660, ignored.
est1: Invalid id16 (set, cur) = (19, 21)
est1: Invalid freq 2527, ignored.
est1: Invalid id16 (set, cur) = (18, 21)
est1: Invalid freq 2394, ignored.
est1: Invalid id16 (set, cur) = (17, 21)
est1: Invalid freq 2261, ignored.
est1: Invalid id16 (set, cur) = (16, 21)
est1: Invalid freq 2128, ignored.
est1: Invalid id16 (set, cur) = (15, 21)
est1: Invalid freq 1995, ignored.
est1: Invalid id16 (set, cur) = (14, 21)
est1: Invalid freq 1862, ignored.
est1: Invalid id16 (set, cur) = (13, 21)
est1: Invalid freq 1729, ignored.
est1: Invalid id16 (set, cur) = (12, 21)
est1: Invalid freq 1596, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (20, 21)
est2: Invalid freq 2660, ignored.
est2: Invalid id16 (set, cur) = (19, 21)
est2: Invalid freq 2527, ignored.
est2: Invalid id16 (set, cur) = (18, 21)
est2: Invalid freq 2394, ignored.
est2: Invalid id16 (set, cur) = (17, 21)
est2: Invalid freq 2261, ignored.
est2: Invalid id16 (set, cur) = (16, 21)
est2: Invalid freq 2128, ignored.
est2: Invalid id16 (set, cur) = (15, 21)
est2: Invalid freq 1995, ignored.
est2: Invalid id16 (set, cur) = (14, 21)
est2: Invalid freq 1862, ignored.
est2: Invalid id16 (set, cur) = (13, 21)
est2: Invalid freq 1729, ignored.
est2: Invalid id16 (set, cur) = (12, 21)
est2: Invalid freq 1596, ignored.
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (20, 21)
est3: Invalid freq 2660, ignored.
est3: Invalid id16 (set, cur) = (19, 21)
est3: Invalid freq 2527, ignored.
est3: Invalid id16 (set, cur) = (18, 21)
est3: Invalid freq 2394, ignored.
est3: Invalid id16 (set, cur) = (17, 21)
est3: Invalid freq 2261, ignored.
est3: Invalid id16 (set, cur) = (16, 21)
est3: Invalid freq 2128, ignored.
est3: Invalid id16 (set, cur) = (15, 21)
est3: Invalid freq 1995, ignored.
est3: Invalid id16 (set, cur) = (14, 21)
est3: Invalid freq 1862, ignored.
est3: Invalid id16 (set, cur) = (13, 21)
est3: Invalid freq 1729, ignored.
est3: Invalid id16 (set, cur) = (12, 21)
est3: Invalid freq 1596, ignored.
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est4: Invalid id16 (set, cur) = (20, 21)
est4: Invalid freq 2660, ignored.
est4: Invalid id16 (set, cur) = (19, 21)
est4: Invalid freq 2527, ignored.
est4: Invalid id16 (set, cur) = (18, 21)
est4: Invalid freq 2394, ignored.
est4: Invalid id16 (set, cur) = (17, 21)
est4: Invalid freq 2261, ignored.
est4: Invalid id16 (set, cur) = (16, 21)
est4: Invalid freq 2128, ignored.
est4: Invalid id16 (set, cur) = (15, 21)
est4: Invalid freq 1995, ignored.
est4: Invalid id16 (set, cur) = (14, 21)
est4: Invalid freq 1862, ignored.
est4: Invalid id16 (set, cur) = (13, 21)
est4: Invalid freq 1729, ignored.
est4: Invalid id16 (set, cur) = (12, 21)
est4: Invalid freq 1596, ignored.
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est5: Invalid id16 (set, cur) = (20, 21)
est5: Invalid freq 2660, ignored.
est5: Invalid id16 (set, cur) = (19, 21)
est5: Invalid freq 2527, ignored.
est5: Invalid id16 (set, cur) = (18, 21)
est5: Invalid freq 2394, ignored.
est5: Invalid id16 (set, cur) = (17, 21)
est5: Invalid freq 2261, ignored.
est5: Invalid id16 (set, cur) = (16, 21)
est5: Invalid freq 2128, ignored.
est5: Invalid id16 (set, cur) = (15, 21)
est5: Invalid freq 1995, ignored.
est5: Invalid id16 (set, cur) = (14, 21)
est5: Invalid freq 1862, ignored.
est5: Invalid id16 (set, cur) = (13, 21)
est5: Invalid freq 1729, ignored.
est5: Invalid id16 (set, cur) = (12, 21)
est5: Invalid freq 1596, ignored.
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est6: Invalid id16 (set, cur) = (20, 21)
est6: Invalid freq 2660, ignored.
est6: Invalid id16 (set, cur) = (19, 21)
est6: Invalid freq 2527, ignored.
est6: Invalid id16 (set, cur) = (18, 21)
est6: Invalid freq 2394, ignored.
est6: Invalid id16 (set, cur) = (17, 21)
est6: Invalid freq 2261, ignored.
est6: Invalid id16 (set, cur) = (16, 21)
est6: Invalid freq 2128, ignored.
est6: Invalid id16 (set, cur) = (15, 21)
est6: Invalid freq 1995, ignored.
est6: Invalid id16 (set, cur) = (14, 21)
est6: Invalid freq 1862, ignored.
est6: Invalid id16 (set, cur) = (13, 21)
est6: Invalid freq 1729, ignored.
est6: Invalid id16 (set, cur) = (12, 21)
est6: Invalid freq 1596, ignored.
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est7: Invalid id16 (set, cur) = (20, 21)
est7: Invalid freq 2660, ignored.
est7: Invalid id16 (set, cur) = (19, 21)
est7: Invalid freq 2527, ignored.
est7: Invalid id16 (set, cur) = (18, 21)
est7: Invalid freq 2394, ignored.
est7: Invalid id16 (set, cur) = (17, 21)
est7: Invalid freq 2261, ignored.
est7: Invalid id16 (set, cur) = (16, 21)
est7: Invalid freq 2128, ignored.
est7: Invalid id16 (set, cur) = (15, 21)
est7: Invalid freq 1995, ignored.
est7: Invalid id16 (set, cur) = (14, 21)
est7: Invalid freq 1862, ignored.
est7: Invalid id16 (set, cur) = (13, 21)
est7: Invalid freq 1729, ignored.
est7: Invalid id16 (set, cur) = (12, 21)
est7: Invalid freq 1596, ignored.
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ex_isa_identify()
fdc: fdc0 already exists; skipping it
ahc_isa_probe 10: ioport 0xac00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0047
psm0: strange result for test aux port (1).
psm0: failed to reset the aux device.
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ukbd0: <Microsoft Microsoft\M-. Digital Media Pro Keyboard, class 0/0, rev 2.00/1.10, addr 2> on uhub6
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: <Microsoft Microsoft\M-. Digital Media Pro Keyboard, class 0/0, rev 2.00/1.10, addr 2> on uhub6
uhid1: <Logitech Logitech USB Headset, class 0/0, rev 1.10/10.13, addr 3> on uhub6
Device configuration finished.
Reducing kern.maxvnodes 196046 -> 100000
procfs registered
lapic: Divisor 2, Frequency 67469340 hz
Timecounter "TSC" frequency 2698773787 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attachedfirewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
hptrr: no controller detected.
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acd0: <HL-DT-STDVD-RAM GH22NS30/1.01> DVDR drive at ata1 as master
acd0: read 8269KB/s (8269KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ad3: 286167MB <WDC WD3000GLFS-01F8U0 03.03V01> at ata1-slave UDMA33
ad3: 586070255 sectors [581418C/16H/63S] 16 sectors/interrupt 1 depth queue
ad3: Intel check1 failed
ad3: Adaptec check1 failed
ad3: LSI (v3) check1 failed
ad3: LSI (v2) check1 failed
ad3: FreeBSD check1 failed
ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad12: 476940MB <WDC WD5002ABYS-01B1B0 02.03B02> at ata6-master UDMA33
ad12: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad3
GEOM: new disk ad12
ad12: Intel check1 failed
ad12: Adaptec check1 failed
ad12: LSI (v3) check1 failed
ad12: LSI (v2) check1 failed
ad12: FreeBSD check1 failed
(probe1:sbp0:0:0:0): error 22
(probe1:sbp0:0:0:0): Unretryable Error
(probe2:sbp0:0:1:0): error 22
(probe2:sbp0:0:1:0): Unretryable Error
(probe3:sbp0:0:2:0): error 22
(probe3:sbp0:0:2:0): Unretryable Error
(probe4:sbp0:0:3:0): error 22
(probe4:sbp0:0:3:0): Unretryable Error
(probe5:sbp0:0:4:0): error 22
(probe5:sbp0:0:4:0): Unretryable Error
(probe6:sbp0:0:5:0): error 22
(probe6:sbp0:0:5:0): Unretryable Error
(probe7:sbp0:0:6:0): error 22
(probe7:sbp0:0:6:0): Unretryable Error
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI-0 device
pass0: 40.000MB/s transfers
GEOM: new disk da0
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #7 Launched!
cpu7 AP:
ID: 0x07000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #6 Launched!
cpu6 AP:
ID: 0x06000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 2
ioapic0: Assigning ISA IRQ 6 to local APIC 4
ioapic0: Assigning ISA IRQ 9 to local APIC 6
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 2
ioapic0: Assigning PCI IRQ 16 to local APIC 4
ioapic0: Assigning PCI IRQ 17 to local APIC 6
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 2
ioapic0: Assigning PCI IRQ 21 to local APIC 4
ioapic0: Assigning PCI IRQ 23 to local APIC 6
Trying to mount root from ufs:/dev/ad12s2a
start_init: trying /sbin/init
re0: link state changed to UP
More information about the freebsd-net
mailing list