mpd and vlan

[Ganbold]

Alexander,

Alexander Motin wrote:
> I mean something like this:
>
> default:
>        load server1
>        load server2
>        load server3
> ..
> pppoe_standard:
>        set ccp yes mpp-e40
>        set ccp yes mpp-e128
>        set ccp yes mpp-stateless
>        set pppoe service "*"
>        set pppoe disable originate
>        set pppoe enable incoming
> ..
> server1:
>        new -i ng1 pppoe1 pppoe1
>        set ipcp ranges x.x.x.x/32 y.y.y.y/24
>        load pppoe_standard
> server2:
>        new -i ng2 pppoe2 pppoe2
>        set ipcp ranges x.x.x.x/32 y.y.y.y/24
>        load pppoe_standard
> server3:
>        new -i ng3 pppoe3 pppoe3
>        set ipcp ranges x.x.x.x/32 y.y.y.y/24
>        load pppoe_standard
> ..
>
> mpd.links file:
> pppoe1:
>        set link type pppoe
>        set pppoe iface vlan0
> pppoe2:
>        set link type pppoe
>        set pppoe iface vlan1
> pppoe3:
>        set link type pppoe
>        set pppoe iface vlan2
> ..
>

OK, so I have to create vlans first on the system and then configure 
mpd.links file accordingly and take out the "set pppoe iface bge1" line 
from mpd.conf. I will try it sometime later and let you know how it goes.

thanks a lot,

Ganbold