D-Link DGE-530T

[Tim Allender]

Eygene Ryabinkin wrote:
>> Come's with fbsd 5.3 drivers, but not 6.1.
>> Is there an easy way out?
>>     
> Use sk(4) driver. It supports DGE-530T:
>   
Is that driver not built into the kernel? If not and all I need to do is 
rebuild the kernel, ok, I can do that.
But if it's already in the kernel and the OS isn't using that driver for 
that model NIC already, how would I make it do so?
> -----
> skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xd800-0xd8ff mem 0xdfffc000-0xdfffffff irq 10 at device 7.0 on pci0
> skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x1)
> sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
> sk0: Ethernet address: 00:0d:88:64:ad:72
>
> $ uname -r
> 6.2-PRERELEASE
> -----
> I had no problems with this card with sk(4) driver since 5.3. (Apart
> from bridge + checksum offloading problem that does not affect non-bridged
> configurations and can be cured by disabling hardware-assisted checksums).
>