freevrrpd and em

[Andrea Venturoli]

Hello.
I'm trying to get freevrrpd working on an AMD64 6.0p4 box with an xl0 
and em0 machine.

Here is the config file:

> [VRID]
> serverid = 1
> interface = xl0
> priority = 254
> addr = 192.168.0.4/32
> password = xxxxx
> vridsdep = 3
> [VRID]
> serverid = 2
> interface = xl0
> priority = 255
> addr = 192.168.0.5/32
> password = xxxxx
> [VRID]
> serverid = 3
> interface = em0
> priority = 254
> addr = 192.168.101.5/32
> password = xxxxx
> vridsdep=1
> monitoredcircuits=no
> [VRID]
> serverid=4
> interface=em0
> priority=255
> addr=192.168.101.6/32
> password=xxxxx
> monitoredcircuits=no

This used to work until this box replaced the old machine which had fxp0 
instead of em0; the other machine has fxp0 and fxp1.

I had to add monitoredcirtuits=no, otherwise em0 would connect and 
disconnect (no carrier) at 2 secs intervals (I read this on a post 
somewhere).
However this only solves part of the problems, since both boxes will 
grab 192.168.101.5 and 192.168.101.6 at the same time.
The same post reports this is fixed in CVS, so I went to the master web 
site and followed instructions to do so. However my connection is 
refused and I suspect that's a problem with the CVS server side.

The other side (xl0) works perfectly.

I cannot switch to carp, since the other machine is running 4.11.

Any hint?
Has someone been able to download the CVS sources? If so, would it be 
too much trouble sending them to me?
Any magic switch to put in conf?

Remove .diespammer to answer to me directly, please.

  bye & Thanks
	av.