bge0 (BCM5703X) problems

Tue Jun 24 05:08:42 PDT 2003

Hello,

Ive been reading through quite some archives but still have
found no satisfactory solution for my problem.

Im running a compaq proliant server with a BCM5703X nic.
Its performance is lousy to say the least, connections
stall and the connection only gets used for 1/4 of the available
bandwith.

Is there any decent solution to this problem?

Dmesg:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Wed Jun 18 15:22:27 CEST 2003
    root at gmt:/usr/src/sys/compile/GMT
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2786.47-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1610588160 (1572840K bytes)
config> di cs0
config> en sn0
config> po sn0 0x300
config> ir sn0 10
config> f sn0 0
config> en lnc0
config> po lnc0 0x280
config> ir lnc0 10
config> f lnc0 0
config> en ie0
config> po ie0 0x300
config> ir ie0 10
config> iom ie0 0xd0000
config> f ie0 0
config> en fe0
config> po fe0 0x300
config> ir fe0 0
config> f fe0 0
config> en ed0
config> po ed0 0x280
config> ir ed0 10
config> iom ed0 0xd8000
config> f ed0 0
config> q
avail memory = 1562411008 (1525792K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
Programming 16 pins in IOAPIC #2
Programming 16 pins in IOAPIC #3
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  6, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  7, version: 0x00050014, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x000f0011, at 0xfec00000
 io1 (APIC): apic id:  3, version: 0x000f0011, at 0xfec01000
 io2 (APIC): apic id:  4, version: 0x000f0011, at 0xfec02000
 io3 (APIC): apic id:  5, version: 0x000f0011, at 0xfec03000
Preloaded elf kernel "kernel" at 0xc04a8000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04a809c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #2 intpin 0 -> irq 2
IOAPIC #2 intpin 1 -> irq 5
IOAPIC #0 intpin 11 -> irq 10
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 3.0
pci0: <unknown card> (vendor=0x0e11, dev=0xb203) at 4.0 irq 2
pci0: <unknown card> (vendor=0x0e11, dev=0xb204) at 4.2 irq 5
isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 ATA100 controller> port
0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xf5ef0000-0xf5ef0fff irq 10 at
device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <Host to PCI bridge> on motherboard
IOAPIC #1 intpin 14 -> irq 11
IOAPIC #1 intpin 15 -> irq 15
IOAPIC #1 intpin 13 -> irq 16
pci1: <PCI bus> on pcib1
ahc0: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port
0x3000-0x30ff mem 0xf7df0000-0xf7df0fff irq 11 at device 3.0 on pci1
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port
0x3400-0x34ff mem 0xf7de0000-0xf7de0fff irq 15 at device 3.1 on pci1
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
bge0: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf7dd0000-0xf7ddffff irq 16 at device 4.0 on pci1
bge0: Ethernet address: 00:0b:cd:23:63:5a
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
pcib2: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
pcib3: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib6: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
IOAPIC #1 intpin 8 -> irq 17
pci6: <PCI bus> on pcib6
ciss0: <Compaq Smart Array 532> port 0x4000-0x40ff mem
0xf7ef0000-0xf7ef3fff,0xf7fc0000-0xf7ffffff irq 17 at device 1.0 on pci6
ciss0: using 256 of 1024 available commands
ciss0:   1 logical drive configured
ciss0:   firmware 2.20
ciss0:   2 SCSI channels
ciss0:   signature 'CISS'
ciss0:   valence 1
ciss0:   supported I/O methods 0xe<simple,performant,MEMQ>
ciss0:   active I/O method 0x3<simple>
ciss0:   4G page base 0x00000000
ciss0:   interrupt coalesce delay 1000us
ciss0:   interrupt coalesce count 16
ciss0:   max outstanding commands 1024
ciss0:   bus types 0x2<ultra3>
ciss0:   server name ''
ciss0:   heartbeat 0x1000003c
ciss0: 1 logical drive
ciss0: logical drive 1: RAID 1, 34304MB online
pcib10: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci10: <PCI bus> on pcib10
pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci4: <PCI bus> on pcib4
pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci5: <PCI bus> on pcib5
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0726 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
acd0: CDROM <COMPAQ CD-ROM SC-148C> at ata0-master PIO4
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)
IP packet filtering initialized, divert disabled, rule-based forwarding

kernel config (

machine		i386
cpu		I686_CPU
ident		GMT
maxusers	0

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug
symbols

#options 	MATH_EMULATE		#Support for x87 emulation
options		QUOTA
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep
this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_DIRHASH		#Improve performance on big
directories
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, NFS
required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660
required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP
THIS!]
options 	SCSI_DELAY=5000	#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time
extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options 	ICMP_BANDLIM		#Rate limit bad replies
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in
debug
					# output.  Adds ~128k to driver.
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in
debug
					# output.  Adds ~215k to driver.

# To make an SMP kernel, the next two are needed
options 	SMP			# Symmetric MultiProcessor Kernel
options 	APIC_IO			# Symmetric (APIC) I/O

# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
options 	HTT			# HyperThreading Technology

device		isa
device		eisa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
device		fd1	at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device		fdc0

# ATA and ATAPI devices
device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering

# SCSI Controllers
device		ahb		# EISA AHA1742 family
device		ahc		# AHA2940 and onboard AIC7xxx devices
device		ahd		# AHA39320/29320 and onboard AIC79xx
devices
device		amd		# AMD 53C974 (Tekram DC-390(T))
device		isp		# Qlogic family
device		mpt		# LSI-Logic MPT/Fusion
device		ncr		# NCR/Symbios Logic
device		sym		# NCR/Symbios Logic (newer chipsets)
options 	SYM_SETUP_LP_PROBE_MAP=0x40
				# Allow ncr to attach legacy NCR devices
when
				# both sym and ncr are configured

device		adv0	at isa?
device		adw
device		bt0	at isa?
device		aha0	at isa?
device		aic0	at isa?

device		ncv		# NCR 53C500
device		nsp		# Workbit Ninja SCSI-3
device		stg		# TMC 18C30/18C50

# SCSI peripherals
device		scbus		# SCSI bus (required)
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)

# RAID controllers interfaced to the SCSI subsystem
device		asr		# DPT SmartRAID V, VI and Adaptec SCSI
RAID
device		dpt		# DPT Smartcache - See LINT for options!
device		iir		# Intel Integrated RAID
device		mly		# Mylex AcceleRAID/eXtremeRAID
device		ciss		# Compaq SmartRAID 5* series

# RAID controllers
device		aac		# Adaptec FSA RAID, Dell PERC2/PERC3
#device		aacp		# SCSI passthrough for aac (requires CAM)
device		ida		# Compaq Smart RAID
#device		amr		# AMI MegaRAID
device		mlx		# Mylex DAC960 family
device		twe		# 3ware Escalade

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1 flags 0x1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa?
#options 	XSERVER			# support for X server on a vt
console
#options 	FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT
lines
#options 	PCVT_SCANSET=2		# IBM keyboards are non-std

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device		apm0	at nexus? disable flags 0x20 # Advanced Power
Management

# PCCARD (PCMCIA) support
#device		card
#device		pcic0	at isa? irq 0 port 0x3e0 iomem 0xd0000
#device		pcic1	at isa? irq 0 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
device		sio2	at isa? disable port IO_COM3 irq 5
device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# PCI Ethernet NICs.
#$device		de		# DEC/Intel DC21x4x (``Tulip'')
#device		em		# Intel PRO/1000 adapter Gigabit Ethernet
Card (``Wiseman'')
#device		txp		# 3Com 3cR990 (``Typhoon'')
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
device		miibus		# MII bus support
#device		dc		# DEC/Intel 21143 and various workalikes
#device		fxp		# Intel EtherExpress PRO/100B (82557,
82558)
#device		pcn		# AMD Am79C97x PCI 10/100 NICs
#device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sis		# Silicon Integrated Systems SiS 900/SiS
7016
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		tl		# Texas Instruments ThunderLAN
#device		tx		# SMC EtherPower II (83c170 ``EPIC'')
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
#device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
device		bge		# Broadcom BCM570x (``Tigon III'')

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device		ed0	at isa? disable port 0x280 irq 10 iomem 0xd8000
device		ex
device		ep
device		fe0	at isa? disable port 0x300
# Xircom Ethernet
device		xe
# PRISM I IEEE 802.11b wireless NIC.
device		awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device		wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device		an
# The probe order of these is presently determined by
i386/isa/isa_compat.c.
device		ie0	at isa? disable port 0x300 irq 10 iomem 0xd0000
#device		le0	at isa? disable port 0x300 irq 5 iomem 0xd0000
device		lnc0	at isa? disable port 0x280 irq 10 drq 0
device		cs0	at isa? disable port 0x300
device		sn0	at isa? disable port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
#pseudo-device	sl	1	# Kernel SLIP
#pseudo-device	ppp	1	# Kernel PPP
#pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"
pseudo-device	gif		# IPv6 and IPv4 tunneling
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and
da
device		ums		# Mouse
#device		uscanner	# Scanners
#device		urio		# Diamond Rio MP3 Player
# USB Ethernet, requires mii
#device		aue		# ADMtek USB ethernet
#device		cue		# CATC USB ethernet
#device		kue		# Kawasaki LSI USB ethernet

options RANDOM_IP_ID
options TCP_DROP_SYNFIN
options PERFMON

-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.2.2 (FreeBSD)
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=y3KW
-----END PGP PUBLIC KEY BLOCK-----