PVR-250 with FreeBSD 10.0?

[Mark]

It's been awhile, but changes written for the v4l project broke the pvrxxx port.
There was an earlier pvrxxx port that had v4l support written into it that would work in 8 and early 9.
I switched to linux due to the breakage but it still takes a bit of work to track down all the steps to make the card function.


HTH
 
People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf. 
George Orwell


On Sunday, August 3, 2014 5:34 PM, Kevin Monceaux <Kevin at RawFedDogs.net> wrote:
 


On Sun, Aug 03, 2014 at 08:39:17AM -0500, Kevin Monceaux wrote:

> Thanks for the help.  I was able to build and install the port successfully.
> But, when issuing a "kldload cxm" it loads the module, but I get:
> 
> device_attach: cxm0 attach returned 6

I probably should have posted all the messages produced when loading the cxm
module in case they give any clues:

cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf0000000-0xf3ffffff irq 18 at device 2.0 on pci4
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
cxm0: Temic 4036 FY5 tuner
cxm0: SAA7115 rev 1 video decoder
cxm0: MSP4448G-A2 audio decoder
cxm0: could not initialize IR remote
iicbus0: detached
iicbb0: detached
cxm_iic0: detached
device_attach: cxm0 attach returned 6

It looks like it's at least recognizing the card and tuner.  Does anyone
have any suggestions?




-- 

Kevin
http://www.RawFedDogs.net
http://Lassie.RawFedDogs.net
http://www.WacoAgilityGroup.org
Bruceville, TX

What's the definition of a legacy system? One that works!
Errare humanum est, ignoscere caninum.
_______________________________________________
freebsd-multimedia at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe at freebsd.org"