ASUS USB2.0 WebCam 04G6200086K0AN14J001ELK And Webcamd

[Sean DuBois]

On Sun, Oct 13, 2013 at 12:43:48PM +0200, Hans Petter Selasky wrote:
> On 10/13/13 10:39, Sean DuBois wrote:
> > Hello!
> >
> > Running FreeBSD STABLE I have the following USB Webcam
> >
> > sean at SeanLaptop:~$ sudo usbconfig
> > ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
> > ugen1.1: <XHCI root HUB 0x1b21> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
> > ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
> > ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
> > ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
> > ugen0.3: <product 0x07da vendor 0x8087> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (0mA)
> > ugen0.4: <ASUS USB2.0 WebCam 04G6200086K0AN14J001ELK> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
> >
> >
> > sean at SeanLaptop:~$ sudo usbconfig -d ugen0.4 dump_device_desc
> > ugen0.4: <ASUS USB2.0 WebCam 04G6200086K0AN14J001ELK> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
> >
> >    bLength = 0x0012
> >    bDescriptorType = 0x0001
> >    bcdUSB = 0x0200
> >    bDeviceClass = 0x00ef
> >    bDeviceSubClass = 0x0002
> >    bDeviceProtocol = 0x0001
> >    bMaxPacketSize0 = 0x0040
> >    idVendor = 0x058f
> >    idProduct = 0xa014
> >    bcdDevice = 0x0003
> >    iManufacturer = 0x0003  <04G6200086K0AN14J001ELK>
> >    iProduct = 0x0001  <ASUS USB2.0 WebCam>
> >    iSerialNumber = 0x0000  <no string>
> >    bNumConfigurations = 0x0001
> >
> > However, when I run webcamd all I get is a solid green screen in pwcview?
> >
> > On GNU/Linux this device is listed as
> > 058f:a014 Alcor Mirco Corp. Asus Integrated Webcam and uses the UVC driver.
> >
> >
> > This device is NOT listed as supported in the man page for UVC on FreeBSD, but is it possible for me to help with this?
> >
> > Also, is it helpful for me to submit this product/vendor ID to the FreeBSD project?
> >
> > Thanks!
> 
> Hi,
> 
> Did you try different resolutions?
> 
> See "-s" option for pwcview.
> 
> --HPS
> 

Thank you HPS that worked perfectly, my webcam works with qsif and qcif.

Is it helpful for me to document this anywhere?

Also, do you have any suggestions of an application that I use for
Audio/Video and XMPP? I think I can use pidgin, but I am having some
trouble with setting the resolution in gstreamer-settings.

Thank you for your help, and Webcamd!